Investigation of the separation of scandium and rare earth elements from red mud by use of reversed-phase HPLC

A chromatographic method has been developed for separation and determination of scandium (Sc) and rare earth elements (REEs) in samples from a red mud (RM)-utilization process. Reversed-phase high-performance liquid chromatography (RP-HPLC) with post-column derivatization using 4-(2-pyridylazo)-resorcinol (PAR) and UV–visible detection at 520 nm was tested using different gradient elution profiles and pH values to optimize separation and recovery, primarily for Sc but also for yttrium and the individual lanthanides, from iron present in the samples. The separation was performed in less than 20 min by use of a mobile phase gradient. The concentration of -hydroxyisobutyric acid (-HIBA), as eluent, was altered from 0.06 to 0.4 mol L^–1 (pH 3.7) and 0.01 mol L^–1 sodium salt n-octane sulfonic acid (OS) was used as modifier. Very low detection limits in the nanogram range and a good resolution for Sc and REEs except for Y/Dy were achieved. Before application of the method to the red mud samples and to the corresponding bauxites, Sc and REEs were leached from red mud with 0.6 mol L^–1 HNO₃ and mostly separated, as a group, from the main elements by ion exchange/selective elution (6 mol L^–1 HNO₃) in accordance with a pilot-plant process developed in this laboratory. After evaporation of the eluent to dryness the extracted elements were re-dissolved in the mobile phase. By use of this chromatographic method Sc, which is the most expensive of the elements investigated and occurs in economically interesting concentrations in red mud, could be separated not only from co-existing Fe but also from Y/Dy, Yb, Er, Ho, Gd, Eu, Sm, Nd, Pr, Ce and La. All the elements investigated were individually recovered. Their recoveries were found to be nearly quantitative.     

Separation of organoselenium compounds and their electrochemical detection

A simplified procedure based on ion-exchange separation of selenourea (Se-U) and selenocystamine (Se-CM), which have very close half-wave potential when they are simultaneously analyzed by voltammetric techniques, has been developed and optimized. Thus, selenocystamine remains in the cation exchanger Purolite C 100 H, whereas selenourea is found in the effluent and is determined by square wave cathodic stripping voltammetry using Na₂CO₃ as electrolyte. Selenocystamine is then eluted from the cation exchanger using 4 M HCl and analyzed by square wave cathodic stripping voltammetry in the HCl solution. For each voltammetric determination the corresponding parameters were investigated and optimized; the obtained detection limits were 0.3 ng Se mL^–1 for Se-CM and 2 ng Se mL^–1 for Se-U. A flow sheet for the separation of inorganic (Se(IV) and Se(VI)) and organoselenium compounds (Se-U, Se-CM, (CH₃)₂Se₂, and (CH₃)₂Se) developed for their electrochemical detection is presented and it was successfully applied to a certified reference material, an environmental soil sample, and a urine sample.     

Ternäre Halogenide der Seltenen Erden vom Typ A2MX5 (A = K,In, NH4, Rb,Cs; X = Cl,Br, I)

Ternary Rare-Earth Halides of the A₂MX₅ Type (A = K, In, NH₄, Rb, Cs; X = Cl, Br, I) Ternary rare-earth (=M) chlorides, bromides, and iodides In₂MCl₅, (NH₄)₂MCl₅, Rb₂MCl₅, Cs₂MCl₅, CsRbMCl₅, K₂MBr₅, Rb₂MBr₅, K₂MI₅, and Rb₂MI₅ have been synthesized. Single crystals of In₂PrCl₅, Rb₂PrCl₅, K₂PrBr₅, and K₂PrI₅ were grown and the structures refined. The other halides were characterized by x-ray powder patterns. They are isotypic either with K₂PrCl₅(orthorhombic, Pnma, Z = 4, hexagonal arrangement of chains of edge-connected polyhedra [PrX₇]) or with Cs₂DyCl₅ (orthorhombic, Pbnm, Z = 4, hexagonal arrangement of cis-corner-connected octahedra [DyCl₆]) which may be discriminated in structure field diagrams. The thermal expansion was investigated für Cs₂LuCl₅ and Rb₂PrX₅ (X = Cl, Br, I).     

Mass spectometry of aralkyl compounds with a functional group—VI1: Mass spectra of 1-phenylethyanol-1, 2-phenylethanol-1 and 1-phenylpropanol-2

Mass spectra of 1-phenylethanol-1 and its analogues, specifically deuterated in the aliphatic chain, suggest that the [M? CH₃]⁺ ion is represented partly by an α-hydroxybenzyl fragment. Moreover, the molecular ion loses successively—after scrambling of all hydrogen atoms, except those of CH₃? a hydrogen atom and C₆H₆, generation the CH₃CO⁺ ion. Diffuse peaks, found in the spectra of of 2-phenylethanol-1 and its analogues, specifically deuterated in the aliphatic chain and in the phenyl ring, show that the molecular ion loses C₂H₄O, possibly via a four-center mechanism, after an exchange of aromatic and hydroxylic hydrogens. Mass spectra of 1-phenylpropanol-2 and its analogues, specifically, deuterated in the aliphatic chain, demonstrate that in the molecular ion exclusively the hydroxyl hydrogen atom is transferred to one of the ortho-positions of the phenyl ring via a McLafferty rearrangement, generating the [M ? C₂H₄O]⁺ ion. Furtherore, an eight-membered ring structure is proposed for the [M ? CH₃]⁺ ion to explain the loss of H₂O and C₂H₂O from this ion after an extensive scrambling of hydrogen atoms.     

Reactive polymeric nanoparticles based on unconventional dextran derivatives

Unconventional dextran derivatives with reactive tosyl- and deoxy-azido moieties were synthesized homogeneously under various reaction conditions. Well soluble tosyl dextran of a high degree of substitution up to 1.66 was prepared applying N,N-dimethylacetamide/LiCl as solvent. Almost 50% of secondary toslyate moieties could be replaced by nucleophilic displacement reaction with azide ions. The structure of the products was efficiently analyzed by NMR spectroscopy also after peracylation of the unconventional dextran derivatives. Applying a simple dialysis technique, nanospheres with a size in the range from 160 to 420 nm (D50%) were obtained that possess reactive functional tosyl- and deoxy-azido groups.     

Phenylated polyimides via bifunctional monomers

The synthesis of two phenylated bifunctional monomers, dimethyl 4-(4-(p-aminophenoxy)phenyl)-3,5,6-triphenylphthalate and dimethyl 4-(4-(4-(p-aminophenoxy)phenoxy)phenyl)-3,5,6-triphenylphthlate, was accomplished. Polymerization in solution or by a bulk polymerization procedure yielded a series of low molecular weight phenylated polyimides. The polymers were soluble in chlorinated hydrocarbons and exhibited thermal stabilities comparable to other polyimide systems.     

Coupling of narrow-bore liquid chromatography to thin-layer chromatography : Part 2. Application of fluorescence-based spectroscopic techniques for off-line detection

The effluent from a narrow-bore liquid chromatographic (l.c.) separation can be immobilized on thin-layer chromatographic (t.l.c.) plates with little loss of resolution. The deposited compounds are then available for further inspection. For off-line detection, direct fluorescence emission, fluorescence excitation emission spectra, and fluorescence line-narrowing spectroscopy are investigated with tetracene and benz[k] fluoranthene as model compounds. Detection based on direct emission measurements and on measurements for which complete spectra are obtained for the separated compounds, is suitable for identification and determination. Detection limits are of the same order of magnitude as those for on-line detection in narrow-bore l.c. The fluorescence spectra of immobilized compounds can be obtained with a conventional fluorescence spectrometer equipped with a solid-sample accessory. No other special apparatus is needed. The immobilized chromatogram is also suitable for techniques incompatible with flow systems, e.g., fluorescence line-narrowing spectroscopy, which yields fluorescence spectra via laser excitation of low-temperature solid samples. Very selective narrow-line fluorescence spectra were obtained for tetracene deposited on t.l.c. plates in amounts down to the low picogram level.     

Influence of substrate morphology on organic layer growth: PTCDA on Ag(1 1 1)

By UV-excited photoelectron emission microscopy (UV-PEEM) we investigated the microscopic growth behavior of organic thin films using 3,4,9,10-perylene-tetracarboxylicacid dianhydride (PTCDA) on a Ag(1 1 1) single crystal substrate as example. Direct, real time observation allows to correlate the initial growth modes and the related kinetic parameters with substrate properties like terrace width, step density, and step bunches from the submonolayer range up to 5 layers or more. Above room temperature PTCDA grows in a Stranski–Krastanov fashion: after completion of the first two stable layers three-dimensional islands are formed. The nucleation density strongly depends on the temperature and the substrate morphology thus affecting the properties of the organic film.     

Synthese und konformationsstudien von selen-analoga der metallocen-dithiolen-chelate früher übergangsmetalle

The reaction of the metallocene dichlorides Cp₂MCl₂ (Cp = η⁵-C₅H₅; M = Ti, Zr, Hf, Mo, W) and Cp₂′TiCl₂ (Cp′ = η⁵-C₅H₄CH₃) with equimolar amounts of dilithium-benzene-o-diselenolate, 1,2-(LiSe)₂C₆H₄, gives the chelate complexes Cp₂M(Se₂C₆H₄) (M = Ti (I), Zr (II), Hf (III), Mo (IV), W (V)) and Cp₂′Ti(Se₂C₆H₄) (VI). CpTiCl₃ reacts with 1,2-(LiSe)₂C₆H₄ to give CpTiCl(Se₂C₆H₄) (VII). The ring inversion activation parameters for I–VI can be determined by means of temperature-dependent ¹H NMR spectroscopy in solution. The fragmentation behaviour of I–VII in the mass spectrometer has been investigated by pursuing metastable transitions, using linked-scan techniques.     

Übergangsmetall—methylen-komplexe : XXXI. Primärkomplexierung von diazoalkanen an metall—metall-mehrfachbindungen; ein weiterer koordinationstyp

An unexpected novel coordination mode of diazoalkanes has been verified via addition of 2-diazopropane to the metal—metal triple bond of bis[dicarbonyl(η⁵-pentamethylcyclopentadienyl)molybdenum] (MoMo). The dinuclear 1:1 addition product isolated in nearly quantitative yield is structurally characterized by a bent, 4-electron type η¹:η²-diazoalkane ligand, with the terminal nitrogen atom symmetrically bridging the metal-metal “single bond” (d(MoMo) 305.0(2) pm; d(Mo---N(1)) 212.0(12) and 212.6(10) pm, respectively) and the second nitrogen atom being bonded to one molybdenum atom only (d(Mo---N(2)) 213.4(13) pm).