Enthalpimetric determination of fluoride

An injection calorimeter used for analytical and thermochemical purposes is described. Amounts of sodium fluoride between 6 and 8 mg are determined with an error of +/-0.04 mg. The calorimeter is also used in determining DeltaH for the precipitation of lead chloro-fluoride from water solutions with an ionic strength of 1M. DeltaH = 36.6 +/- 0.3 kJ mole . Quantitative analysis is made by flow microcalorimeter with amounts of sodium fluoride between 40 and 400mug and an error of +/-4 mug. An ion-exchange system for separation of fluoride from phosphate, sulphate, nitrate and chloride is also described.     

Coordination around thorium(IV) in aqueous perchlorate,chloride and nitrate solutions

The coordination around the thorium(IV) ion in aqueous perchlorate, chloride and nitrate solutions has been determined from large angle X-ray scattering measurements. In perchlorate solutions, where inner-sphere complexes are not formed, the first coordination sphere contains 8.0±0.5 water molecules with Th-H₂O bond lengths of 2.48₅ Å. In chloride solutions inner-sphere complexes are formed, which lead to an increase in the coordination number. In nitrate solutions the nitrate ions are bonded as bidentate ligands to the thorium ion. The bond lengths are similar to those found in crystalline hydrates of thorium nitrate. The coordination numbers found for thorium(IV) in solution are compared with previously reported values for lower charged ions of similar size.On leave from Department of Inorganic Chemistry Royal Institute of Technology S-10044 Stockholm Sweden     

Structure determination of zinc iodide complexes formed in aqueous solution

Structures of the complexes formed in aqueous solutions between zinc(II) and iodide ions have been determined from large-angle X-ray scattering, Raman and far-IR measurements. The coordination in the hydrated Zn²⁺ hexaaqua ion and the first iodide complex, [ZnI]⁺, is octahedral, but is changed into tetrahedral in the higher complexes, [ZnI₂(H₂O)₂], [ZnI₃(H₂O)]^– and [ZnI₄]^2–. The Zn-I bond length is 2.635(4)Å in the [ZnI₄]^2– ion and slightly shorter, 2.592(6)Å, in the two lower tetrahedral complexes. In the octahedral [ZnI(H₂O)₅]⁺ complex the Zn-I bond length is 2.90(1)Å. The Zn-O bonding distances in the complexes are approximately the same as that in the hydrated Zn²⁺ ion, 2.10(1)Å.     

A novel way to study the initial stages of soap-free emulsion polymerizations: The intercalation of polystyrene oligomers into hydrotalcite

The dominant species in the early stages of an emulsifier-free emulsion polymerization of styrene has been found to be an oligomer of two to three monomer units using a novel trapping technique. This involved the intercalation of charged primary oligomers between the layers of a hydrotalcite, [Mg₄Al₂(OH)₁₂]²⁺[A]^2- (where A = dianion). Hydrotalcites are an important class of lamellar, inorganic compounds whose interlayer spacing can be mod-ified by anion exchange. Our approach first involved preparing a hydrotalcite precursor in which the layers were propped apart by an organic dianion (terephthalate = TA). This material was then used to capture the negatively charged polystyrene oligomers from the emulsion polymerization reaction mixture. We found that TA was rapidly ion-exchanged for the charged oligomers. The resulting pillared hydrotalcite material was characterized using XRD and SEC. We found that the interlayer spacing between the hydroxide layers increased to 23.2 Å on exposure to the emulsion reaction mixture. This represents an interlayer expansion of 18.3 Å (after subtraction of the hydroxide layer contribution), which is cnsistent with intercalation of oligomers with two to three monomer units arranged in a bilayer. This size estimate was confirmed by the results of size exclusion chromatography. © 1995 John Wiley & Sons, Inc.     

Control of lysine reactivity in four-helix bundle proteins by site-selective pKa depression: expanding the versatility of proteins by postsynthetic functionalization

Five 42-residue polypeptides have been designed to fold into hairpin helix-loop-helix motifs that dimerize to form four-helix bundles, and to serve as protein scaffolds for the elucidation at the molecular level of the principles that control and fine-tune lysine and ornithine reactivities in a protein context. Site-selective control of Lys and Orn reactivity provides a mechanism for addressing directly individual residues and is a prerequisite for the site-selective functionalization of folded proteins. Several lysine and one ornithine residues were introduced on the surface and in the hydrophobic core of the folded motif. The reactivity of each residue was determined by measuring the degree of acylation of the trypsin cleaved fragments by HPLC and mass spectrometry. The most reactive residues were Orn34 and Lys19, both of which were located in d positions in the heptad repeat, and therefore in hydrophobic environments. Upon reaction of the helix-loop-helix dimer KA-I with one equivalent of mono-p-nitrophenyl fumarate, Orn34 was acylated approximately three times more efficiently than Lys19, whereas Lys10 (b position), Lys15 (g position), and Lys33 (c position) remained unmodified. In the sequence KA-I-A(15) Lys15 was replaced by an alanine residue and the selectivity of Orn34 over Lys19 increased to approximately a factor of six, probably because Lys15 had the capacity to reduce the pK(a) value of Lys19 and 85 % of site-selectively monoacylated product was obtained. The pH dependence of the acylation reaction was determined and showed that the pK(a) of the reactive residues were 9.3, more than a pK(a) unit below the magnitude of the corresponding residue in a solvent exposed position. Introducing Lys and Orn residues into a or d positions of the heptad repeat therefore serves as a mechanism of depressing their pK(a) to increase their reactivity site selectively. Extensive NMR and CD spectroscopic analyses showed that the sequences fold according to prediction.     

Addition of palladium and platinum tri-tert-butylphosphine groups to Re-Sn and Re-Ge bonds

The reaction of Re2(CO)8[mu-eta2-C(H)=C(H)Bu(n)](mu-H) with Ph3SnH at 68 degrees C yielded the new compound Re2(CO)8(mu-SnPh2)2 (10) which contains two SnPh2 ligands bridging two Re(CO)(4) groups, joined by an unusually long Re-Re bond. Fenske-Hall molecular orbital calculations indicate that the bonding in the Re2Sn2 cluster is dominated by strong Re-Sn interactions and that the Re-Re interactions are weak. The 119Sn M?ssbauer spectrum of 10 exhibits a doublet with an isomer shift (IS) of 1.674(12) mm s(-1) and a quadrupole splitting (QS) of 2.080(12) mm s(-1) at 90 K,characteristic of Sn(IV) in a SnA2B2 environment. The IS is temperature dependent, -1.99(14) x 10(-4) mm s(-1) K(-1); the QS is temperature independent. The temperature-dependent properties are consistent with the known Gol'danskii-Kariagin effect. The germanium compound Re2(CO)8(mu-GePh2)2 (11) was obtained from the reaction of Re2(CO)8[mu-eta2-C(H)=C(H)Bu(n)](mu-H) with Ph3GeH. Compound 11 has a structure similar to that of 10. The reaction of 10 with Pd(PBu(t)3)2 at 25 degrees C yielded the bis-Pd(PBu(t)3) adduct, Re2(CO)8(mu-SnPh2)2[Pd(PBu(t)3)]2 (12); it has two Pd(PBu(t)3) groups bridging two of the four Re-Sn bonds in 10. Fenske-Hall molecular orbital calculations show that the Pd(PBu(t)3) groups form three-center two-electron bonds with the neighboring rhenium and tin atoms. The mono- and bis-Pt(PBu(t)3) adducts, Re2(CO)8(mu-SnPh2(2)[Pt(PBu(t)3)] (13) and Re2(CO)8(mu-SnPh2)2[Pt(PBu(t)3)]2 (14), were formed when 10 was treated with Pt(PBu(t)3)2. A mono adduct of 11, Re2(CO)8(mu-GePh2)2[Pt(PBu(t)3)] (15), was obtained similarly from the reaction of 11 with Pt(PBu(t)3)2.     

Phenylated polyimides via bifunctional monomers

The synthesis of two phenylated bifunctional monomers, dimethyl 4-(4-(p-aminophenoxy)phenyl)-3,5,6-triphenylphthalate and dimethyl 4-(4-(4-(p-aminophenoxy)phenoxy)phenyl)-3,5,6-triphenylphthlate, was accomplished. Polymerization in solution or by a bulk polymerization procedure yielded a series of low molecular weight phenylated polyimides. The polymers were soluble in chlorinated hydrocarbons and exhibited thermal stabilities comparable to other polyimide systems.     

Redox-switchable direction of photoinduced electron transfer in an Ru(bpy)3(2+)-viologen dyad

Quenching of the 3MLCT excited state of [Ru(bpy)3]2+ (bpy=bipyridine) by the reduction products (MV*+ and MV0) of methyl viologen (MV2+) was studied by a combination of electrochemistry with laser flash photolysis or femtosecond pump-probe spectroscopy. Both for the bimolecular reactions and for the reactions in an Ru(bpy)3(2+)-MVn+ dyad, quenching by MV*+ and MV0 is reductive and gives the reduced ruthenium complex [Ru(bpy)3]+, in contrast to the oxidative quenching by MV2+. Rate constants of quenching (kq), and thermal charge recombination (krec) and cage escape yields (phi(ce)) were determined for the bimolecular reactions, and rates of forward (kf) and backward (kb) electron transfer in the dyad were measured for quenching by MV2+, MV*+, and MV0. The reactions in the dyad are very rapid, with values up to kf = 1.3 x 10(12) s(-1) for *Ru(bpy)3(2+)-MV*+. In addition, a long-lived (tau = 15 ps) vibrationally excited state of MV*+ with a characteristically structured absorption spectrum was detected; this was generated by direct excitation of the MV*+ moiety both at 460 and 600 nm. The results show that the direction of photoinduced electron transfer in a Ru(bpy)3-MV molecule can be switched by an externally applied bias.     

An intercomparison of sampling techniques for measurements of radiocaesium in upland pasture and soil

An intercomparison of sampling procedures used by five laboratories for the determination of radiocaesium in vegetation and peaty soil was carried out at two locations in Cumbria. The multiple sampling has given information on the homogeneity of the parameters studied at each location. The parameters comprise soil bulk densities, total deposition of¹³⁷Cs, deposition of¹³⁷Cs in three soil layers, biomass densities, concentrations of¹³⁷Cs in pasture, and activity ratios (¹³⁴Cs/¹³⁷Cs) in soil and vegetation. The determination of total deposition of¹³⁷Cs gave no indication of differences between the laboratories. The results from the soil profiles do indicate significant differences between laboratories. One laboratory using a coring technique observed difficulties during sampling due to compression of the soil. The coring technique should thus be avoided or applied with extreme care for the sampling of depth profiles in peaty soil. The results from the sampling of pasture show no indication of differences between the laboratories. For the parameters studied the observed variabilities across soil depths and locations range from 10% to 81% in terms of relative standard deviations. A comparison across all results at the two locations indicate a 50% higher field variability at one of the sites relative to the other.     

Übergangsmetall—methylen-komplexe : XXXI. Primärkomplexierung von diazoalkanen an metall—metall-mehrfachbindungen; ein weiterer koordinationstyp

An unexpected novel coordination mode of diazoalkanes has been verified via addition of 2-diazopropane to the metal—metal triple bond of bis[dicarbonyl(η⁵-pentamethylcyclopentadienyl)molybdenum] (MoMo). The dinuclear 1:1 addition product isolated in nearly quantitative yield is structurally characterized by a bent, 4-electron type η¹:η²-diazoalkane ligand, with the terminal nitrogen atom symmetrically bridging the metal-metal “single bond” (d(MoMo) 305.0(2) pm; d(Mo---N(1)) 212.0(12) and 212.6(10) pm, respectively) and the second nitrogen atom being bonded to one molybdenum atom only (d(Mo---N(2)) 213.4(13) pm).