The synthesis of 1-methyl-1-germaadamantane

The syntheses of 1-methyl-1-germaadamantane and 1-chloro-1-germaadamantane are described. Attempts to prepare the 1-methyl-1-stannaadamantane and the novel cage systems, 1-silatris-nor- and 1-silatris-homo-adamantanes are also described as well as the syntheses of a variety of Group IV 1,3,5-trisubstituted cyclohexanes.     

Evaluation of the swab test on premises for detection of antimicrobial residues in bovine and porcine kidneys

The effect of sample matrix on the sensitivity of the Swab Test On Premises (STOP) was evaluated for selected antimicrobials. Fluid was extracted from bovine and porcine kidneys, and fortified with known levels of drugs. Aqueous standards were also prepared at the same levels. An aliquot of the fortified fluid or water was pipeted onto a dry swab which was placed onto the surface of a STOP plate, and the plate was incubated as outlined in the test kit manual. Zones of bacterial growth inhibition were measured and recorded, and additional testing was performed with decreasing levels of drug until a minimum detectable level was determined. The effect of temperature on the sensitivity of the test was also evaluated by running samples in duplicate, one set at a nominal temperature of 28 degrees C, and the second set at a nominal temperature of 32 degrees C. Fortified bovine kidney fluid produced significantly larger zones than did porcine kidney fluid at both temperatures, but the mean zone sizes for fortified water were not significantly different from those of bovine or porcine kidney fluid at either temperature. For all 3 matrixes, zones of inhibition were significantly larger at 28 degrees than 32 degrees C.     

Experimental and theoretical study of the structure of N,N-dimethyl-4-nitroaniline derivatives as model compounds for non-linear optical organic materials

Molecular and crystal structure of a series of derivatives of N,N-dimethyl-4-nitroaniline has been studied by both X-ray diffraction method and high-level ab initio calculations. According to these data, the dimethylamino groups were found to have a trigonal-pyramidal configuration and are considerably turned with respect to the ring plane in all molecules having a substituent in the ortho-position; on the contrary, this group is planar in the meta-substituted molecules. Topological analysis of the electron density function for all molecules studied within the framework of Bader's ‘atoms in molecules’ (AIM) theory revealed that introduction of a substituent into the ortho- or meta-position of the ring results in increasing of the contribution of the resonance forms different from the quinoid one. Contribution of the latter form is predominant for the structure of N,N-dimethyl-4-nitroaniline (1). Topological analysis of the electron density distribution was used to explain a decreasing of the molecular hyperpolarisabilites of the ortho- and meta-substituted compounds as compared with those for 1.     

Reaction of carbonyl fluoride with fluorine in the presence of various fluorides as catalysts

The fluorides KF, RbF and CsF have been known to serve as catalysts for the reaction CF₂O + F₂→ CF₃OF. The list of catalysts for this process has now been enlarged to include NaF, MgF₂, CaF₂, SrF₂, BaF₂ and LaF₃. Lithium fluoride and thorium fluoride also give CF₃OF but are less active. Perhaps the substances CsF·HF, KAgF₄ and NiF₂ should be included in this list. Silver fluoride, usually as a mixture of AgF₂ with AgF, has been known to catalyze the reaction of CF₂O with F₂ to give both CF₃OF and CF₃OOCF₃. The proportion of the latter in the mixture of products increases with decreasing temperature. At 25°, the reaction is slow and the yield of CF₃OOCF₃ is very high. It has now been shown that TIF₃ behaves like silver fluoride. It has also been shown that many other fluorides of metals give higher yields of CF₃OOCF₃ than of CF₃OF but require higher temperatures than AgF₂ (100-ca. 150°) to be effective. Various possible mechanisms for these catalytic processes are discussed.     

The Development of Gas-flow Modulation for High-frequency MTDSC measurements

The purpose of this study was to investigate the feasibility of modulating the temperature programme of a conventional DSC by use of an alternating gas-flow system. Modulated temperature differential scanning calorimetry (MTDSC) is an important thermal analysis technique but suffers from a limited applicable frequency range due to the mass of the sample and DSC cell leading to the impingement of thermal conductivity effects. We suggest that the frequency limit can be increased by replacing the cell as the source of temperature modulation with an external gaseous source, directed towards the sample and reference pans. In this evaluation, an alternating gas-flow was passed through a line to a forced gas-flow accessory (FGFA). The FGFA consisted of two matched cylinders containing chambers that allowed pre-temperature-equilibration of the stream of gas before it was passed over the sample and reference pans. The development of this device revealed the essential practical requirements of gas-flow modulation for high-frequency temperature modulation. These include the following: an appropriately sealed tunable gas supply to both sample and reference pans, an effective method for high-frequency cycling of the gas-flow rate, a small aperture to deliver the flowing gas directly over the pan and a temperature equilibration chamber. The results from samples of quenched PET and amorphous Saquinavir indicate that gas-flow modulation is indeed feasible, with the FGFA able to raise the attainable temperature modulation frequency by an order of magnitude compared to conventional MTDSC. This revised version was published online in August 2006 with corrections to the Cover Date.     

Precipiton reagents: precipiton phosphines for solution-phase reductions

[structure: see text] [structure: see text] [structure: see text] Several Precipiton phosphines were prepared and employed in the Staudinger reaction and in the reduction of secondary ozonides. Both amines and aldehdyes were obtained in good to excellent yields and purities. After use of the phosphine, isomerization and precipitation of the spent phosphorus reagent were induced by exposure to visible light in the presence of erythrosin B, a triplet sensitizer. Products were isolated by simple filtration. The use of the triplet sensitizer has the added advantage of eliminating [2 + 2] cycloaddition reactions between trans-Precipitons.     

Coordination properties of a diarylaza crown ether appended with a luminescent [Ru(bipy)3]2+ unit

The [Ru(bipy)(2)(1)](PF(6))(2) (bipy refers to 2,2'-bipyridine) complex, comprising a ruthenium(II) tris(2,2'-bipyridine) luminophore covalently linked to a di[(o-triethyleneglycoxy)phenyl]amine crown ether 1, has been synthesized and fully characterized. The photophysical properties of this metal complex have been examined in solution at ambient temperature. Luminescence from the metal complex is enhanced significantly in the presence of various adventitious cations, including protons. In particular, Li(+) cations bind to the crown ether, as evidenced by (1)H NMR and luminescence spectroscopy. Cation binding serves to decrease the rate of reductive quenching of the triplet state of the metal complex, thereby increasing the extent of luminescence. The solution-phase conformation of [Ru(bipy)(2)(1)](PF(6))(2), with and without encapsulated Li(+), has been examined by 2-D NMR and by molecular dynamics simulations.     

Crystal structures of dicarboxy-2,2'-bipyridyl complexes: the role of hydrogen bonding and stacking interactions

The crystal structures of three complexes of dicarboxy-2,2'-bipyridyl ligands, 5,5'-dicarboxy-2,2'-bipyridyl (1) and 4,4'-dicarboxy-2,2'-bipyridyl (2) are reported. [Rh(1H)3] shows two interpenetrating, homochiral rhombohedral networks linked by short carboxylate-carboxylic acid hydrogen bonds, in which each complex acts as a node for six hydrogen bonds. [Ru(1H2)(1H)2] forms only four such hydrogen bonds, leading to the formation of heterochiral chains held together by stacking between bipyridyls. [Co(2H)3] can in principle form six hydrogen bonds, but in practice forms only four in a layer structure where stacking interactions are important. This is attributed to differences in molecular shape.     

Effects of methyl substitution on radiative and solvent quenching rate constants of [Ru(phen)2dppz]2+ in polyol solvents and bound to DNA

Methyl substituents on the distant benzene ring of the dppz ligand in the "light switch" complex [Ru(phen)(2)dppz](2+) have profound effects on the photophysics of the complexes in water as well as in the polyol solvents ethylene glycol, glycerol, and 1,2- and 1,3-propanediol. Whereas 11,12-dimethyl substitution decreases the rate of quenching by diminishing hydrogen bonding by solvent, the 10-methyl substituent in addition also decreases both the radiative and the nonradiative rate constant for decay to the ground state of the non-hydrogen-bonded excited state species. For both the 10-methyl and the 11,12-dimethyl derivatives, the effect of methyl substitution on the equilibrium of solvent hydrogen bonding to the excited state is due to changes in the entropy terms, rather than in the enthalpy, indicating that the effect is a steric perturbation of the solvent cage around the molecule. When intercalated into DNA, the effects of methyl substitution is smaller than those in polyol solvent or water, suggesting that the water molecules that quench the excited state by hydrogen bonding to the phenazine aza nitrogens mainly access them from the same groove as in which the Ru(II) ion resides. Since the Delta-enantiomer of [Ru(phen)(2)10-methyl-dppz](2+) has an absolute quantum yield of up to 0.23 when bound to DNA, a value 7000 times higher than in pure water solution, it is promising as a new luminescent DNA probe.     

Factors affecting the efficiency and stereoselectivity of α-amino acid synthesis by the Petasis reaction

The use of chiral secondary amines containing only one branched substituent has been shown to give optimal yields and stereoselectivities in the preparation of α-amino acids using the Petasis reaction. While the use of chiral primary amines generally gives products in low to moderate diastereoselectivity, chiral secondary amines generally give products in >95:5 diastereoselectivity. Additionally, the use of amines with two chiral (and by definition, branched) N-alkyl substituents results in significantly reduced yields with respect to to secondary amines with one or no branched N-alkyl substituents.