Characteristics of the magnetic analysis system for a compact MPR-type spectrometer

The magnetic proton recoil(MPR)spectrometer is a novel diagnostic instrument with high perfor-mance for measurements of neutron spectra in inertial confinement fusion(ICF)experiments and high power fusion devices.A compact MPR-type spectrometer dedicated to the research of pulsed deuterium-tritium(DT)neutron spectroscopy of special experimental conditions is currently under design.Analyses of the main parameters and performance of the magnetic analysis system through 3-D particle transport calculations and MonteCarlo simulations and calibration of the system performance as a test using CR-39 solid track detector and α particle from 239pu and 226Ra radioactive sources are presented in this paper.The results indicate that the magnetic analysis system will achieve a detection efficiency level of 10-5-10-4 at an energy resolution of 1.5%-2.1%,and fulfills the design goals of the spectrometer.     

Temperature effect on threshold voltage and optical property of twisted nematic liquid crystal with applied different voltages

In this paper, temperature-dependent birefringence theory of liquid crystal is used to investigate the temperature effect on the threshold voltage. An expression for describing the non-linear relationship between the threshold voltage and temperature is deduced. In addition, we theoretically discuss the temperature effect on the transmitted ratio of the namatic twisted liquid crystal without the applied voltage and with the applied voltage. It is found that the transmitted ratio is decreased linearly as temperature is increased when the liquid crystal is not applied with voltage, but the transmitted ratio is increased linearly as temperature is increased when the liquid crystal is applied with voltage. The threshold voltages and the transmitted ratio are measured at different temperatures. The experimental data are consistent with the theoretical calculated results.     

Ultra-lightweight cellulose foam material: preparation and properties

Ultra-lightweight cellulose foams were prepared by regeneration of sodium dodecyl sulfate (SDS)/cellulose/NaOH/urea blend solution via mechanical agitation and then freeze-drying. The morphology and properties of the blend solutions and foams were investigated via optical microscope, rheometer, BET and SEM. As a result, it was found that the inclusion complex structure between cellulose macromolecules and the solvent molecules was not destroyed. Moreover, the bubbles were about 20–50 μm in the solutions and larger (>100 μm) in the foams. Not only the micropores (bubbles) but also the nanopores could be observed in the wet and dried foams. The cellulose foams possessed ultra-low density of about 30 mg/cm³ and high specific surface area. The result of X-ray diffraction and Fourier transform infrared spectroscopy indicated that the cellulose foams were transited from cellulose I to cellulose II after dissolution and gelation. Bubbles inside the wet foams weakened the mechanical properties, but inversely increased the mechanical properties in the dried foams. Typical “J”-shaped curves were observed during the mechanical test, which revealed good compressive strength of dried foams. In this work, cellulose foams with ultra-lightweight and good mechanical properties were obtained, which exhibited great potentials for further development and comprehensive utilization of cellulose.     

Interfacial passivation mechanism of sulfide towards quantum dot-sensitized nanocrystalline thin films

Journal of Solid State Electrochemistry - We report on the interfacial passivation mechanism in CdSe quantum dot-sensitized ZnO nanocrystalline thin film, where different sulfide semiconductors...     

Non‐intrusive reduced‐order modeling for multiphase porous media flows using Smolyak sparse grids

In this article, we describe a non‐intrusive reduction method for porous media multiphase flows using Smolyak sparse grids. This is the first attempt at applying such an non‐intrusive reduced‐order modelling (NIROM) based on Smolyak sparse grids to porous media multiphase flows. The advantage of this NIROM for porous media multiphase flows resides in that its non‐intrusiveness, which means it does not require modifications to the source code of full model. Another novelty is that it uses Smolyak sparse grids to construct a set of hypersurfaces representing the reduced‐porous media multiphase problem. This NIROM is implemented under the framework of an unstructured mesh control volume finite element multiphase model. Numerical examples show that the NIROM accuracy relative to the high‐fidelity model is maintained, whilst the computational cost is reduced by several orders of magnitude. Copyright © 2016 John Wiley & Sons, Ltd.     

Novel materials for bioanalytical and biomedical applications: Environmental response and binding/release capabilities of amphiphilic hydrogels with shape‐persistent dendritic junctions

The binding and release capabilities of a hydrogel series, constructed of hydrophilic poly(ethylene glycol) segments and hydrophobic dendritic junctions [poly (benzyl ether)s], are evaluated in aqueous media. The environmental response of the amphiphilic networks is also tested in water at three pH values: 1.5, 7.0, and 10.1. The highest swelling ratio is observed under acidic conditions and varies between 3.7 and 6.5, depending on the crosslinking density and dendrimer generation. Gel specimens with embedded indicators react within 3–6 s with a clear color switch to the change in the pH of the surrounding medium. The experiments with model anionic and cationic indicators and stains show that the hydrogels have basic interiors. The gel binding capabilities depend on the water solubility of the substrate and on the size of the incorporated dendritic fragments. Model release studies have been performed at 37 °C and pHs 1.5, 7.0, and 10.1. The observed phenomena are explained by the transformations in the structure and charge that both the networks and the model compounds undergo with the changes in the pH of the aqueous medium. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4017–4029, 2005     

燃煤锅炉粉煤灰中典型痕量金属元素淋滤特性研究

本文通过批淋滤实验研究了某电厂2号炉三个静电除尘器下粉煤灰中Cd、Cr、Pb、V的淋滤特性.淋滤液选择pH=4的HCI和pH=10的NaOH溶液,液固比为4:1;批淋滤选取从15分钟到7天的14个时间进行.实验结果显示,在实验条件下,Cr在酸性条件下淋出滤较高,而Pb在碱性条件下淋出滤较高;其中Cr随着淋滤时间的增加,淋出滤有显著增加,且三种粉煤灰中淋出滤大小为LCr3>LCr2>LCr1.     

Biochemical sensor based on a novel all-fibre cavity ring down spectroscopy technique incorporating a tilted fibre Bragg grating

A novel all-fibre cavity ring down spectroscopy technique is proposed where a tilt fibre Bragg grating (TFBG) or long-period grating (LPG) in the cavity provides sensitivity to surrounding medium. Such configuration with an LPG as the representative was theoretically analyzed. Two spectral bands were identified employable for sensing of surrounding refractive index for a weak LPG while only one band existed for a strong LPG. A TFBG, with enhanced sensitivity compared to usual LPGs, was used in a ring down cavity of 1 m constructed with 2 fibre Bragg gratings as the reflectors and the decay time changed from 220 to 450 ns when the TFBG was immersed into water from air.     

Deuterium solid echo line shape study of poly(ethylene oxide) dynamics in a blend with poly(methyl methacrylate)

Deuterium solid echo line shapes were measured on deuterated poly(ethylene oxide) (d₄PEO) in a blend with protonated poly(methyl methacrylate) to characterize chain dynamics of this component in the blend. Line shapes were observed as a function of temperature from 183 to 243 K and echo delay times from 10 to 100 μs on a blend containing 20 wt % d₄PEO. The line shapes and the associated relative intensities were quantitatively interpreted in terms of segmental motion and libration. The results of the interpretation are compared to an earlier study of deuterium spin‐lattice relaxation times over the temperature range of 313 to 413 K. A combined interpretation of both sets of data is developed based on bimodal distribution of correlation times that are separated by about 2 orders of magnitude in time. The faster mode is 30% of the correlation function with a stretched exponent near one while the slower mode is characterized by an exponent of 0.5. The source of the bimodal character is not revealed by the line shape and relaxation data but is consistent with the presence of two glass transition temperatures in this miscible blend and anomalous translational diffusion of diethyl ether through the blend. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2433–2444, 2005