Synthesis and Characterization of Aminophosphines,Bis(amino)phosphine Derivatives,and Their Molybdenum(0) Complexes

Functionalized bis(amino)phosphines of the type PhP(NHR)₂ ( 1a–c ) and aminophosphines of the type Ph₂PNHR ( 2a–c ) have been synthesized by treating PhPCl₂ or Ph₂PCl with corresponding primary amines of H₂N-R where R = -CH₂SO₃H, -C₆H₄SO₃H, and benzo-15-crown-5. The molybdenum(0) complex of the aminophosphine ( 3 ) has been obtained by reacting cis-[Mo(CO)₄(bipy)] with aminophosphine ( 2c ). The synthesized aminophosphines, bis(amino)phosphines, and the molybdenum(0) complex have been characterized by IR, ¹H NMR, ³¹P NMR, and MS spectroscopic techniques and by elemental analysis.     

Stark Hole-Burning Spectroscopy of Cresylviolet Perchlorate in Amorphous Hosts

Stark hole-burning spectroscopy is used to investigate the effective dipole moment change of cresylviolet perchlorate (CVP) in various glass and polymer hosts such as ethanol:methanol (EM), polyvinyl alcohol (PVA), poly (2-hydroxyethyl) methacrylate (PHEMA), polyvinylbutyral (PVB), and formamide. The strong correlation between effective dipole moment change of the guest molecule and the holeburning efficiencies of the host matrices illustrates the sensitivity of the dipole moment change as a direct measure of guest-host interactions. Hole-burning is found to be more efficient as the dipole induced reaction field increases. This relationship is discussed in terms of the unusual hole-burning mechanism suggested for this molecule. The effective dipole moment change of cresylviolet perchlorate ranges from 0.14 to 0.59 Debye.     

Ultra-lightweight cellulose foam material: preparation and properties

Ultra-lightweight cellulose foams were prepared by regeneration of sodium dodecyl sulfate (SDS)/cellulose/NaOH/urea blend solution via mechanical agitation and then freeze-drying. The morphology and properties of the blend solutions and foams were investigated via optical microscope, rheometer, BET and SEM. As a result, it was found that the inclusion complex structure between cellulose macromolecules and the solvent molecules was not destroyed. Moreover, the bubbles were about 20–50 μm in the solutions and larger (>100 μm) in the foams. Not only the micropores (bubbles) but also the nanopores could be observed in the wet and dried foams. The cellulose foams possessed ultra-low density of about 30 mg/cm³ and high specific surface area. The result of X-ray diffraction and Fourier transform infrared spectroscopy indicated that the cellulose foams were transited from cellulose I to cellulose II after dissolution and gelation. Bubbles inside the wet foams weakened the mechanical properties, but inversely increased the mechanical properties in the dried foams. Typical “J”-shaped curves were observed during the mechanical test, which revealed good compressive strength of dried foams. In this work, cellulose foams with ultra-lightweight and good mechanical properties were obtained, which exhibited great potentials for further development and comprehensive utilization of cellulose.     

Measuring powder flowability with a modified Warren Spring cohesion tester

The measurement of powder flowability is a major concern for most industrial processes that deal with the handling of bulk solids as raw materials,intermediates,or products.The development of devices that measure the flowability of non-aerated powders has not progressed as rapidly as might have been hoped since most research activities have been based on various types of shear testers intended to aid the design of hoppers.A new flowability indicator named as weighted cohesion (WS) is established using newly...     

Construction of Multivariate Tight Framelet Packets Associated with Dilation Matrix

In this paper, we present a method for constructing multivariate tight framelet packets associated with an arbitrary dilation matrix using unitary extension principles.We also prove how to construct various tight frames for L2(Rd) by replac-ing some mother framelets.     

Highly improved crystallization behavior of poly(L‐lactide) induced by a novel nucleating agent: substituted‐aryl phosphate salts

In this work, a novel nucleating agent (NA) based on substituted‐aryl phosphate salts was introduced into poly(L‐Lactide) (PLLA). The nonisothermal and isothermal crystallization behaviors of nucleated PLLA samples were investigated through differential scanning calorimetry (DSC), wide angle X‐ray diffraction, and polarized optical microscope (POM). Furthermore, the effect of annealing treatment on the cold crystallization behaviors of nucleated samples was also investigated. The results show that the crystallization of PLLA, whether for the melt crystallization (including nonisothermal and isothermal crystallization process) or for the cold crystallization (including the cold crystallization occurring during the DSC heating process and during the annealing process), is greatly dependent upon the content of NA. At relatively lower NA content (≤0.1 wt%), the nucleation effect of NA is inconspicuous, however, at higher NA content (≥0.2 wt%), it exhibits great nucleation effect for the crystallization of PLLA. Further results show that the double endothermic peak of PLLA depends on the temperature applied for the crystallization. Copyright © 2012 John Wiley & Sons, Ltd.     

Molecularly Imprinted Polypyrrole for DNA Determination

In this study graphite electrodes modified by a thin DNA‐imprinted polypyrrole layer, which was able to bind specific target‐DNA, are reported. For this aim, electrochemical synthesis of polypyrrole was performed on a pencil graphite electrode by cyclic voltammetry (CV) or by potential pulse sequences (PPS). The modified electrode surface was used for electrochemical determination of target‐DNA by differential pulse voltammetry. According to our best knowledge this is a first report on the application of DNA‐imprinted polymer for the determination of target‐DNA. The results showed that the molecularly imprinted polypyrrole (MIPPy) layer that formed on the carbon electrode surface was sensitive for target‐DNA, while the nonimprinted polypyrrole layer was not sensitive to the same target‐DNA. Comparison of electrodes modified using PPS and CV techniques is presented.     

Surface and Catalytic Properties of K/V Catalysts Coating on Porous Al2O3 Substrate

The morphology of different ratio K/V catalysts supported on porous α‐alumina substrate was investigated by atomic force microscopy (AFM). Changes in the particle size distribution, pore size distribution were analyzed respectively using AFM software. In addition, their catalytic activities and compositions for carbon oxidation were studied by x‐ray diffraction (XRD), differential scanning calorimetry (DSC), and temperature‐programmed reactions (TPR). As a result, with the increase of K concentration, the mean particle size gradually increased and the mean pore size decreased. According to the catalytic activity studies, the catalytic activity of the KVO₃ and K₃V₅O₁₄ phases are more effective than KCl.     

Sol–gel synthesis and characterization of conducting polythiophene/tin phosphate nano tetrapod composite cation-exchanger and its application as Hg(II) selective membrane electrode

Nano tetrapod based on conducting polythiophene (PTh) and tin-phosphate (SnP) were synthesized by in situ chemical oxidative polymerization. The morphology of the resulting polythiophene tinphosphate composite was characterized by elemental analysis, fourier transform infrared spectroscopy, thermogravimetric analysis, powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The physico-chemical characterization carried out on the composite showed that SnP was modified by conducting PTh with an enhancement of various properties. On the basis of highest distribution coefficient values for Hg(II), the composite was also used for the preparation of Hg(II) selective membrane electrode. The electrode showed working concentration range of 1 × 10^?1 to 1 × 10^?7 with Nernstian slope of 29.29 mV per decade change in concentration and the electrode may be used for wide working pH range of 4–8 having quick response time about 23 s. The life of electrode is 4 months without any notable drift in potential.     

Effect of temperature on the fluorescence emission of carbazole-substituted methylcellulose in dilute aqueous solutions

Fluorescent-labeled polymers, carbazole-substituted methylcelluloses (Cz-MCs) were synthesized through a two-step reaction by firstly introducing epoxy group to carbazole, and then reacting with MC. Structure of Cz-MC was characterized by using FTIR, NMR, elemental analysis and UV–vis spectroscopy. Aggregation behavior of Cz-MCs in dilute aqueous solution was investigated by a thermotropic study performed with dynamic laser light scattering. Cz-MCs displayed concentration self-quenching properties of fluorescence spectra both in H₂O and DMSO. The temperature effect on the fluorescent emission in dilute aqueous solution was explored. The results showed that the degree of substitution of carbazole and thermal aggregation of Cz-MC contributed to the formation of network structure between the molecules, consequently leading to the enhancement or quenching in fluorescence intensity.