Synergic Extraction of Uranium Thiocyanate by the Ternary System of ABC Species Composed of PMBP-TBP-(C6H5)4AsCI

The synergic extraction of uranyl thiocyanate with binary system of 1-phenyl-3-methy1~4-benzoylpyrazolone-5 (PMBP)and tributyl phosphate(TBP)or tetraphenylarsonium chloride [(C6H5)4AsCl] and ternary system of PMBP-TBP-(C6H5 )4AsCl was studied.There was an obvious synergic effect of uranium (VI)from thiocyanate medium in binary and ternary systems.The formation of a ternary extracted complex,(C6H5)4AsUO2.(NCS)A2 TBP,was confirmed by the slope method.A method was first proposed for the calculation of the equilibrium constant of ternary synergic reaction.     

离子色谱法测定增味剂中的5′-肌苷酸二钠和5′-鸟苷酸二钠

 建立了增味剂中5′-肌苷酸二钠和5′-鸟苷酸二钠的离子色谱分析方法。采用lonPacASll阴离子交换色谱柱,以20mmol／LNa2CO3一体积分数为15％的甲醇溶液为淋洗液,检测波长254um。方法已用于实际样品的测定。     

Determination of Monochloroacetic Acid and Dichloroacetic Acid for Quality Control of Acetic Acid Chlorination Industry by Ion Chromatography

An ion chromatographic method is described for the purpose of quality control in the process of monochloroacetic acid production. Using 2.5 mM NaOH–10% methanol as eluent, the simultaneous determination of acetic acid, monochloroacetic acid, dichloroacetic acid, and Cl⁻ was obtained in a single run. Monochloroacetic acid and dichloroacetic acid showed good linearity in the range 0.1–20 and 0.15–20 μg/ml and correlation coefficients were 0.9999 and 0.9998, respectively. The detection limits (signal-to-noise ratio 3:1) of monochloroacetic acid and dichloroacetic acid were 17 and 25 ng/ml. This simple, sensitive, and time-saving method can be applied for composition analysis in acetic acid chlorination production.     

可生物降解聚酯酰胺共聚物的合成与表征

以两种合成的酰胺二元醇和癸二酸为原料合成了可生物降解的聚酯酰胺共聚物,研究了该癸半晶性聚合物的合成、结晶及其生物降解性,并应用ＩＲ,＾１Ｈ ＮＭＲ,ＳＥＭ及ＤＳＣ进行了表征。     

三异辛胺-硅胶柱高效液相色谱分离与测定矿石中微量金

研究用三异辛胺（ＴＩＯＡ）－硅胶柱反相萃取色谱分离、孔雀绿萃取光度法测定金（Ⅲ）、金回收率在９６％以上。应用于矿石中微量金匠测定,结果满意,测定的最大相对误差（ｎ＝５）为６．３％。     

A Universal Cassette-Based System for the Dissolution of Solid Targets

Cyclotron-based radionuclides production by using solid targets has become important in the last years due to the growing demand of radiometals, e.g., ⁶⁸Ga, ⁸⁹Zr, ^43/47Sc, and ^52/54Mn. This shifted the focus on solid target management, where the first fundamental step of the radiochemical processing is the target dissolution. Currently, this step is generally performed with commercial or home-made modules separated from the following purification/radiolabelling modules. The aim of this work is the realization of a flexible solid target dissolution system to be easily installed on commercial cassette-based synthesis modules. This would offer a complete target processing and radiopharmaceutical synthesis performable in a single module continuously. The presented solid target dissolution system concept relies on an open-bottomed vial positioned upon a target coin. In particular, the idea is to use the movement mechanism of a syringe pump to position the vial up and down on the target, and to exploit the heater/cooler reactor of the module as a target holder. All the steps can be remotely controlled and are incorporated in the cassette manifold together with the purification and radiolabelling steps. The performance of the device was tested by processing three different irradiated targets under different dissolution conditions.     

Eutectic Molecular Liquids Based on Hydrogen Bonding and π–π Interaction for Exfoliating Two‐dimensional Materials and Recycling Polymers

Eutectic molecular liquids (EMLs) based on hydrogen‐bonding interaction and π–π stacking were prepared. We found that the thermodynamic properties like initial decomposition temperature and glass transition temperature of EMLs are mainly dominated by the hydrogen bond donor, which is beneficial for designing and preparing new EMLs. These new liquid systems could be applied in the field of environmental and material science.     

Surface Charge‐Reversible Tubular Micromotors for Extraction of Nucleic Acids in Microsystems

Extraction of nucleic acids in microsystems is of significance for biomedical applications, but the current extraction methods generally require sophisticated microchannels and external equipment, hindering their practical applications. In this work, we have demonstrated a simple, versatile and efficient approach to extract nucleic acids in microsystems by developing cationic branched polyethyleneimine (PEI)‐functionalized tubular micromotors. The as‐developed tubular micromotors are fabricated by a two‐step process combining the template‐assisted electrodeposition and carbodiimide chemistry, and contain an inner catalytic Pt layer, a middle magnetic Ni layer and an outer cationic PEI layer. They exhibit autonomous bubble‐propelled motion in aqueous hydrogen peroxide solutions, which can be guided by an external magnetic field, and the surface charges can be reversibly modulated by changing the pH value of the solution. Consequently, the as‐developed tubular micromotors can selectively absorb nucleic acids from acidic solutions and desorb them into alkaline solutions, leading to the extraction of nucleic acids with high efficiency without external stirring. Furthermore, they can be operated in a microchannel chip without the aid of a pumping system. Our results indicate that this PEI‐functionalized tubular micromotor platform provides a novel, simple and versatile microsystem nucleic acid extraction technology, holding considerable promise for important practical applications.