碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

采用K₃[Fe(CN)₆]作为锌镍电池的电解液添加剂,克服了锌阳极的变形。此外,通过一系列实验设计和表征,探索了电解液中金属锌与K₃[Fe(CN)₆]的反应机理。通过XRD (X-ray diffraction)和XPS (X-ray photo-electron spectroscopy)测试,我们发现金属锌在KOH水溶液中能够与K₃[Fe(CN)₆]反应,将[Fe(CN)₆]^3–还原为[Fe(CN)₆]⁴⁻。添加K₃[Fe(CN)₆]的锌镍电池实现了更长的循环寿命,比不添加K₃[Fe(CN)₆]的锌镍电池长3倍以上。在相同循环次数下,改性电解质中锌阳极循环不仅形状变化较小,而且没有出现“死”锌现象,电极添加剂和粘结剂也没有发生偏析。此外,不同于一般的有机添加剂,K₃[Fe(CN)₆]的加入不仅不会增大电极的极化,还能够提高锌镍电池的放电容量和倍率性能。因此,考虑到这一改性策略有着较高的可行性和较低的成本,K₃[Fe(CN)₆]添加剂在锌镍电池的实际应用中具有极大的推广潜力。     

Synthesis of Dispiro[indoline-3,3′-pyrrolo[2,1-a]isoquinoline-1′,2′′-thiazolo[3,2-a]pyrimidine] Derivatives via Cycloaddition Reactions

Russian Journal of General Chemistry - The 1,3-dipolar cycloaddition reaction of ethyl (Z)-2-(2-methoxy-2-oxoethylidene)-7-methyl-3-oxo-5-aryl-2,3-dihydro-5H-thiazolo[3,2-a]pyrimidine-6-carboxylate...     

嵌段共聚物薄膜快速自组装方法

嵌段共聚物 (BCP) 薄膜可通过不同的退火方法诱导其微相分离,从而获得大面积圆柱状、层状和球状等纳米图案。这些长程有序的纳米结构形态,已经广泛应用在纳米光刻和电子器件等多个领域中。目前,有效且快速的退火方法仍然是BCP薄膜自组装技术中的研究热点。本文首先介绍了制备BCP薄膜纳米结构图案常用的退火技术,然后综述了三种新型快速退火技术,最后分析总结了这些退火技术的优缺点。     

微生物铁氧化还原作用对水中砷锑去除影响的研究进展

砷锑污染在全球领域广泛存在,与常规的铁氧化物相比,微生物铁氧化生成的含Fe(Ⅲ)矿物对水中砷/锑(As/Sb)具有更强的吸附能力,并因其高效、实用和环境友好而具有广阔的应用前景,但微生物铁还原也可能导致被吸附的As/Sb再次释放。本文综述了微生物铁氧化还原作用对As/Sb去除影响的研究进展,归纳了铁矿物“合成-溶解-转化”的微生物循环过程以及该循环伴随的水中As/Sb固定、溶解与转化机理,整合了微生物合成Fe(Ⅲ)矿物的矿物学性质、对As/Sb固定的热动力学规律和络合机制,总结了微生物合成Fe(Ⅲ)矿物对As/Sb去除的影响因素,基于该研究的现存问题展望了利用微生物铁氧化还原作用去除As/Sb的发展方向。     

Spatiotemporally-regulated multienzymatic polymerization endows hydrogel continuous gradient and spontaneous actuation

There are several natural materials which have evolved functional gradients,ingeniously attaining maximal efficacy from limited components.Herein,we utilized the spatiotemporal distribution of initiator acetylacetone to regulate the multienzyme polymerization and fabricate a chitosan-polymer hydrogel.The temporal priority order of acetylacetone was higher than phenolmodified chitosan by density functional theory calculation.The acetylacetone within the gelatin could gradually diffuse spatially into the chitosan hydrogel to fabricate the composite hydrogel with gradient network structure.The gradient hydrogel possessed a transferring topography from the two-dimensional pattern.A continuously decreased modulus along with acetylacetone diffusion was confirmed by atomic force microscope-based force mapping experiment.The water-retaining ability of various regions was confirmed by low-field nuclear magnetic resonance(NMR)and thermogravimetric analysis(TG)analysis,which led to the spontaneous actuation of gradient hydrogel with maximum 1821°/h curling speed and 227°curling angle.Consequently,the promising gradient hydrogels could be applied as intelligent actuators and flexible robots.     

Solvent terminated natural deep eutectic solvent microextraction for concentration of curcuminoids in Curcumae Longae Rhizoma and turmeric tea

A novel solvent terminated microextraction method based on a natural deep eutectic solvent (L-menthol and lactic acid at a molar ratio of 1:2) coupled with high-performance liquid chromatography was proposed, which was utilized for the separation and enrichment of bisdemethoxycurcumin, demethoxycurcumin and curcumin in Curcumae Longae Rhizoma and turmeric tea. The effects of independent parameters on extraction efficiency were optimized by single-factor analysis. Subsequently, four predominated parameters affecting the extraction procedure, including extractant volume, salt concentration, demulsifier consumption, and demulsification time, were further evaluated by a central composite design. Under the optimized conditions, the linear ranges of calibration curves were 0.005–0.5 μg/mL for bisdemethoxycurcumin, 0.004–0.4 μg/mL for demethoxycurcumin, and 0.0045–0.45 μg/mL for curcumin, respectively. In addition, the developed method provided low detection limits (0.1–0.4 ng/mL) and high enrichment factors (279–350). Its intra-day and inter-day precision were carried out by relative standard deviation ranging from 2.2 to 9.2%. Finally, the applicability of this method was assessed by the analysis of Curcumae Longae Rhizoma and turmeric tea samples. The results showed that these samples were detected successfully and the spiked recoveries over the range of 85.3-108.9% with relative standard deviations of 1.6-8.9% were attained, indicating its high relative recoveries with good precision in real sample analysis.     

Isolation of three glucaric acids from Leonurus japonicus Houtt. by using high-speed countercurrent chromatography combined with semi-preparative high-performance liquid chromatography

The isomerism of glucaric acids and the complexity of the composition of Leonurus japonicus Houtt. increased the difficulty of the separation of glucaric acids from the herb. In the present study, three glucaric acids were isolated from Leonurus japonicus Houtt. by using high-speed countercurrent chromatography combined with semi-preparative high-performance liquid chromatography. Cation exchange resin chromatography was applied to remove the alkaloids and enrich the glucaric acid fractions. Preliminary separation of the glucaric acid extract by high-speed countercurrent chromatography was carried out at 45℃ by using an optimized solvent system of ethyl acetate/n-butanol/formic acid/water (1:1:0.01:2, v/v/v/v) with satisfied stationary phase retention and separation factor. The semi-preparative high-performance liquid chromatography was used for further separation and purification of the target fractions, and three monomeric compounds were obtained with purities of 90.0, 91.0, and 95.3%. UV spectroscopy, NMR spectroscopy, and mass spectrometry were employed to identify their structures, which were assigned as 2-syringyl glucaric acid, 2,4-disyringyl glucaric acid, and 3,4-disyringyl glucaric acid, respectively, and 2,4-disyringyl glucaric acid was reported for the first time.     

Eco friendly synthesis of fluorescent carbon dots for the sensitive detection of ferric ions and cell imaging

This study established a ferric ion (Fe³⁺) detection method as a result of the fluorescence quenching effect of Fe³⁺ on carbon dots (CDs). Specifically, we proposed, a green microwave synthesis route towards fluorescent CDs that requires only the brewer’s spent grain as starting materials. Transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectra and X-ray photoelectron spectroscopy were performed to investigate the CDs characteristic: morphology, size distribution, functional groups, and composition, respectively. The experimental results, which were run under optimal experimental conditions, indicated that the fluorescence intensity and concentration of Fe³⁺ were within the desired linear range (0.3–7 μM). The detection limit of this assay towards Fe³⁺ was 95 nM. The proposed method showed significant selectivity with respect to interfering ions. We evaluated the potential application of this method with tap water, lake water and fetal bovine serum as real samples. Additionally, the CDs could be served as superior bioimaging probes in Hela cells as a result of their excellent optical stability and good biocompatibility. In a word, the present study provides a new idea for CDs derived from the waste of agricultural products for detecting food or environmental contaminants and cell imaging.     

Metal- and Solvent-Free Transesterification and Aldol Condensation Reactions by a Homogenous Recyclable Basic Ionic Liquid Based on the 1,3,5-Triazine Framework

A new recyclable basic ionic liquid was introduced as an efficient catalyst for aldol condensation and transesterification reactions under environmentally friendly conditions. The catalyst was prepared based on methyl imidazolium moieties bearing hydroxide counter anions via the Hofmann elimination on a 1,3,5-triazine framework. The ionic liquid with two functionalities including anion stabilizer and high basicity, was used as an efficient catalyst for aldol condensation as well as transesterification reaction of a variety of alkyl benzoates. All reactions were performed in the absence of any external reagent, co-catalyst, or solvent, in line with environmental protection. The kinetics isotope effect (KIE) was conducted for the transesterification reaction to elucidate the mechanism and rate determining step (RDS). It worth noted that, the homogeneous catalyst could be recycled from the reaction mixture and reused for several consecutive runs with insignificant drop of basicity and conversion.     

Leaf-derived sulfonated carbon dots: efficient and recoverable catalysts to synthesize 5-hydroxymethylfurfural from fructose

Sulfonated carbon dots (SCDs) were synthesized from plant leaves via continuously hydrothermal treatment by hydrogen peroxide and sulfuric acid, used as catalyst for converting fructose to 5-hydroxymethylfurfural (HMF). Owing to nanosize effect and moderate acidic intensity, SCDs could thoroughly distribute in the solvent with an improved interfacial compatibility and selectively convert fructose to HMF. Under the optimal condition, the yield of HMF was 92.6% along with a fructose conversion of 100%, benefiting from a low activation energy of 52.9 kJ/mol when dimethylsulfoxide was used as solvent. The SCDs catalyst can be recovered, after six recycles, the fructose conversion and HMF yield were remained 66.1% and 56.2% under condition with incompletely conversion of fructose, respectively. This work provides a sustainable route to prepare carbon dots with a superior catalytic performance for converting biomass to important biobased platform chemicals.