Syntheses and Crystal Structures of Cadmium Complexes with Thiophenedicarboxylate and Bipyridine‐like Ligands

Two new coordination polymers [Cd(tdc)(bpy)(H₂O)]_n ( 1 ) and [Cd(tdc)(phen)]_n ( 2 ) (H₂tdc = thiophene‐2,5‐dicarboxylic acid, bpy = 2,2′‐bipyridine and phen = 1,10‐phenanthroline) have been synthesized under hydrothermal condition. Their crystal structures have been established by X‐ray single‐crystal diffraction. Complex 1 crystallizes in the orthorhombic space group Fdd2 with a = 14.757(7), b = 45.38(2), c = 10.518(5) Å, V = 7044(6) ų, Z = 16; 2 in the monoclinic space group P2₁/c with a = 7.262(1), b = 21.970(2), c = 10.051(1) Å, β = 105.01(1)°, V = 1548.8(2) ų, Z = 4. Both of them are double‐stranded chains and further assembled into three‐dimensional networks by π‐π stacking interactions. 1 and 2 are stable in air, and show blue photoluminescence at 415 nm and 410 nm, respectively.     

Preparation and characterization of lithium ion-conducting glass-ceramics in the Li1 + xCrxGe2 − x(PO4)3 system

Li₂O–Cr₂O₃–GeO₂–P₂O₅ based glasses were synthesized by a conventional melt-quenching method and successfully converted into glass-ceramics through heat treatment. Experimental results of DTA, XRD, ac impedance techniques and FESEM indicated that Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics treated at 900 °C for 12 h in the Li_1 + xCr_xGe_2 − x(PO₄)₃ (x = 0–0.8) system exhibited the best glass stability against crystallization and the highest ambient conductivity value of 6.81 × 10⁻⁴ S/cm with an activation energy as low as 26.9 kJ/mol. In addition, the Li_1.4Cr_0.4Ge_1.6(PO₄)₃ glass-ceramics displayed good chemical stability against lithium metal at room temperature. The good thermal and chemical stability, excellent conducting property, easy preparation and low cost make it promising to be used as solid-state electrolytes for all-solid-state lithium batteries.     

Formation of MoS2 inorganic fullerenes (IFs) by the reaction of MoO3 nanobelts and S

The reaction of MoO3 and S at temperatures higher than 300 degrees C in an argon atmosphere provides a convenient and effective method for the synthesis of MoS2 nanocrystalline substances. MoS2 nanotubes and fullerene-like nanoparticles have been obtained by the reaction at 850 degrees C under well-controlled conditions. The influences of reaction temperature and duration were carefully investigated in this paper. All of the nanostructures were characterized by Xray powder diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). A stepwise reaction model and rolling mechanism were proposed based on the experimental results.     

Flow Injection Chemiluminescence for the Determination of Estriol via a Noncompetitive Enzyme Immunoassay

A novel approach to the detection of estriol using a flow injection system coupled to enhanced chemiluminescent immunoassay was developed based on noncompetitive immunoassay formats. A conjugated estriol-ovalbumin immobilized immunoaffinity column was inserted into the flow system to trap the unbound horseradish peroxidase (HRP)-labeled antibody after an off-line incubation of estriol and HRP-labeled anti-estriol antibody. The trapped enzyme conjugate was detected by the injection of chemiluminescent substrates to produce enhanced chemiluminescence. The linear range for the determination of estriol is 10.0 to 400 ng · mL⁻¹ with a correlation coefficient of 0.996 and a detection limit of 5.0 ng · mL⁻¹. The total time for sampling and chemiluminescent detection of one sample is 400 seconds after 30 min of pre-incubation. The results for pregnancy serum samples obtained by this method are in good agreement with those obtained using ELISA.     

A novel high-performance fourier transform ion cyclotron resonance cell for improved biopolymer characterization

A new trapped ion cell design for use with Fourier transform ion cyclotron resonance mass spectrometry is described. The design employs 15 cylindrical ring electrodes to generate trapping potential wells and 32 separately assignable rod electrodes for excitation and detection. The rod electrodes are positioned internal to the ring electrodes and provide excitation fields that are thereby linearized along the magnetic field over the entire trapped ion volume. The new design also affords flexibility in the shaping of the trapping field using the 15 ring electrodes. Many different trapping well shapes can be generated by applying different voltages to the individual ring electrodes, ranging from quadratic to linearly ramped along the magnetic field axis, to a shape that is nearly flat over the entire trap volume, but rises very steeply near the ends of the trap. This feature should be useful for trapping larger ion populations and extension of the useful range of ion manipulation and dissociation experiments since the number of stages of ion manipulation or dissociation is limited in practice by the initial trapped ion population size. Predicted trapping well shapes for two different ring electrode configurations are presented, and these and several other possible configurations are discussed, as are the predicted excitation fields based on the use of rod electrodes internal to the trapping ring electrodes. Initial results are presented from an implementation of the design using a 3.5 T superconducting magnet. It was found that ions can be successfully trapped and detected with this cell design and that selected ion accumulation can be performed with the utilization of four rods for quadrupolar excitation. The initial results presented here illustrate the feasibility of this cell design and demonstrate differences in observed performance based upon different trapping well shapes.     

Development of a new reaction system for the synthesis of highly optically active alpha,gamma-substituted gamma-butyrolactones

A highly useful method for the synthesis of optically active alpha,gamma-substituted gamma-butyrolactones has been developed. The SmI(2)-induced reductive coupling of chiral 2-alkyl acrylates derived from isosorbide with ketones in the presence of (1S)-(-)-2,10-camphorsultam as a proton source give the chiral alpha,gamma-substituted gamma-butyrolactones in good yields and high enantiomeric purities (up to >99% ee for trans and 75% ee for cis). The reaction system has been investigated with various ketones, and it is demonstrated that this system is very effective for trans-alpha,gamma-substituted gamma-butyrolactones. Both the chiral auxiliary and the hindered proton source in this system are necessary for the observed excellent ee values of the products. The absolute configuration of the trans products is assigned on the basis of the X-ray crystal structure.     

新型大分子席夫碱配合物的合成和表征

本文用胺基封端聚四氢呋喃(Mn=862)与水杨醛反应，生成新型席夫碱遥爪配体，再与金属离子(Fe³⁺, Co²⁺, Cu²⁺)反应，得到新型大分子席夫碱配合物。用IR、ESR、UV、循环伏安法、拉伸和动态粘弹谱等表征手段对配合物进行了研究。证明所得配合物的配位结构与血红蛋白分子的功能片段的配位结构相似，钴配合物具有与血红蛋白分子相近的可逆化学吸附功能。     

Improvement of the performance of facilitated transport membrane process through nonuniformity

Facilitated transport process has attracted much attention because high selectivity and high permeability may be achieved. However, most research on facilitated transport process is concerned only with uniform membranes. In this paper, a model predicting the gas separation performance of a hollow-fiber module with facilitated transport membrane is developed. The influence of feed rate, operation pressure, and permeant-feed flow pattern on the module performance are analyzed and the effect of the nonuniform distribution of reaction equilibrium constant is examined. The calculated results show that the nonuniform active distribution may cause an improved module performance. Because of the passive transport characteristics of the facilitated transport process, the mass transfer driving force across the membrane has a great influence on the improvement of the module performance through a facilitated transport effect.     

The fragmentation reaction of 16R-bromopregnane-3S,20S-diol

16R-Bromopregnane-3S,20S-diol reacted with potassium t-butoxide to afford androst-16-en-3S-ol in a moderate yield via fragmentation reaction. The latter is a key intermediate for the synthesis of 5α-androst-16-en-3-one, as boar sex pheromone, and other steroidal drugs. In addition, 16R,20S-epoxypregnane-3S-ol was also obtained as a major product by changing the reaction solvent.     

Energy Landscape of Aptamer/Protein Complexes Studied by Single‐Molecule Force Spectroscopy

Aptamers are single‐stranded nucleic acid molecules selected in vitro to bind to a variety of target molecules. Aptamers bound to proteins are emerging as a new class of molecules that rival commonly used antibodies in both therapeutic and diagnostic applications. With the increasing application of aptamers as molecular probes for protein recognition, it is important to understand the molecular mechanism of aptamer–protein interaction. Recently, we developed a method of using atomic force microscopy (AFM) to study the single‐molecule rupture force of aptamer/protein complexes. In this work, we investigate further the unbinding dynamics of aptamer/protein complexes and their dissociation‐energy landscape by AFM. The dependence of single‐molecule force on the AFM loading rate was plotted for three aptamer/protein complexes and their dissociation rate constants, and other parameters characterizing their dissociation pathways were obtained. Furthermore, the single‐molecule force spectra of three aptamer/protein complexes were compared to those of the corresponding antibody/protein complexes in the same loading‐rate range. The results revealed two activation barriers and one intermediate state in the unbinding process of aptamer/protein complexes, which is different from the energy landscape of antibody/protein complexes. The results provide new information for the study of aptamer–protein interaction at the molecular level.