硅基多孔氧化铝模板非水电沉积CdS纳米线的研究

纳米材料,包括尺寸为纳米量级的超细微粒?线?薄膜?量子阱和超晶格等引起了人们广泛的重视 [1,2] ?其中 , 半导体纳米微粒和由其构成的纳米固体结构开辟了材料科学研究的新领域?硫化镉 (CdS) 作为一种重要的Ⅱ - Ⅵ族无机半导体材料 , 具有独特的光电性质 , 在光电化学电池和多相光催化反应中都有广泛应用?近年来 , 已有大量关于合成 CdS 纳米结构的文献报导 [3～12] , 所采用的方法如反胶束法?单分子膜法?自组装法以及电化学沉积法等 , 其中非水电解与模板技术相结合的制备方法引起了人们高度的重视并且被广泛的采用?自从 Baranski 等在上…     

Determination of hydrolyzable tannins in the fruit of Terminalia chebula Retz. by high-performance liquid chromatography and capillary electrophoresis

A RP-HPLC method for determining fourteen components (gallic acid, chebulic acid, 1,6-di-O-galloyl-D-glucose, punicalagin, 3,4,6-tri-O-galloyl-D-glucose, casuarinin, chebulanin, corilagin, neochebulinic acid, terchebulin, ellagic acid, chebulagic acid, chebulinic acid, and 1,2,3,4,6-penta-O-galloyl-D-glucose) in the fruit of Terminalia chebula Retz. is described. The separation was achieved within 80 min using a binary gradient with mobile phases consisting of a pH 2.7 phosphoric acid solution and an 80% CH3CN solution. Capillary electrophoretic analyses were also attempted, and it was found that CZE (25 mM Na2B4O7, 5 mM NaH2PO4, pH 7.0) was an efficient method for the separation of gallotannins, while an MEKC method (25 mM Na2B4O7, 5 mM NaH2PO4, 20 mM SDS, pH 7.0, and 10% acetonitrile) provided a better separation for most of the tannins examined. The HPLC and CE methods developed were both successfully applied to the assay of tannins in commercial samples of Chebulae Fructus.     

Effect of take-up speed on physical properties and permeation performance of cellulose acetate hollow fibers

Cellulose acetate (CA) ultrafiltration hollow fibers were spun via the dry-jet wet spinning technique. The effect of the take-up speed on the mechanical properties, morphology, thermal properties, pure water permeation, retention, and surface characterization of hollow fiber membranes were investigated. Both the inner and outer diameters of the hollow fiber decreased with the increase of take-up speed. Macrovoids were observed on the inner surface of the drawn hollow fibers. The d-space decreased with the increase of the take-up speed. The ultimate tensile stress (UTS) increased and the breaking elongation decreased with the increase of take-up speed. The permeation performance was measured. The hydraulic permeability increased and the retention decreased slightly with the increase of the take-up speed. The surface roughness increased with the increase of the take-up speed. The thermal analysis results showed that the endothermic peak shifts to the higher temperature region and coefficient of thermal expansion (CTE) decrease for a higher take-up speed.     

分子力场进展

分子力学（简称ＭＭ）是近年来化学家常用的一种计算方法。与量子力学从头计算和半经验方法相比，用分子力学处理大分子可以大大节省计算时间，而且，在大多数情况下，用分子力学方法计算得到的分子几何构型参数与实验值之间的差值可在实验误差范围之内。所以，分子力学是研究生物化学体系的有效和可行的手段。分子力学的核心是分子力场。本文介绍了分子力场的量子力学背景、分子力场和光谱力场之间的关系。分子力场的一般形式、分力     

Dispersion state of CuO on CeO2

XRD and XPS are used to study the dispersion state of CuO on ceria surface. The dispersion capacity values of CuO measured by the two methods are consistent, which are of 1.20 mmol CuO/100 m² CeO₂. In addition, the results reveal that highly dispersed Cu²⁺ ions are formed at low CuO loadings and that increasing the CuO content to a value higher than its dispersion capacity produces crystalline CuO after the surface vacant sites on CeO₂ are filled. The atomic composition of the outermost layer of the CuO/CeO₂ samples has been probed by using static secondary ion mass spectroscopy (SSIMS), and the ratim of Cu/Ce are found to be 0.93 and 0.46 for the 1.22 and 0.61 mmol CuO/CeO₂ samples respectively. Temperature-programmed reduction (TPR) profile with two reduction peaks at 156 and 165°C suggests that the reduction of highly dispersed Cu²⁺ ions consists of two steps and is easier than that of CuO crystallites, in which the TPR profile has only one reduction peak at about 249°C. The above experimental results are in good agreement with the prediction of the incorporation model. Project supported by the National Natural Science Foundation of China.     

6β-Acetoxy-7 α-Hydroxyroyleanone,A New Compound from Taiwania Cryptomerioides Hayata

Two crystalline compounds from the bark of Taiwania cryptomerioides Hayata were isolated. One of them was identified as 6,7-dehydroroyleanone and the other was shown to be a new derivative of royleanone having a structure of 6β-acetoxy-7α-hydroxyroyleanone.     

Reactions of hydrazoic acid on TiO2 nanoparticles: an experimental and computational study

This article reports the results of a computational and experimental study on the reaction of hydrazoic acid, HN3, adsorbed on 15-20 nm TiO2 particle films. Experimentally, FTIR spectra of HN3(a) have been measured by varying HN3 dosage, UV irradiation time and surface annealing temperature. Three sharp peaks, related to v(a)(NNN) of HN3(a) and N3(a) with different configurations in the 2000-2200 cm(-1) region, and a broad band absorption, related to associated and isolated HN(a) and HO(a) adsorptions in the 3000-3800 cm(-1) region, have been detected. Computationally, molecular structures, vibrational frequencies and adsorption energies of possible adsorbates including HN3 and its derivatives, N3, N2, NH, and H, have been predicted by first-principles calculations based on the density functional theory (DFT) and the pseudopotential method. On the basis of the experimental and computational results, the peak appeared at 2075 cm(-1), which increases at a faster rate with HN3 exposure time, is attributed to a stable adsorbate, N3-Ti(a), with the predicted adsorption energy, E(ads) = 13 kcal/mol. The peak at 2118 cm(-1), which survives at the highest surface temperature in the heating experiment, is attributable to the most stable adsorbate, Ti-N2N(H)-O(a) with E(ads) = 36 kcal/mol. The peak at 2170 cm(-1), which vanishes most readily in all of the aforementioned experiments, is related to less stable molecular adsorbates, end-on HN3-Ti(a) with E(ads) = 5 kcal/mol and side-on HN(N2)-Ti(a) with E(ads) = 8 kcal/mol. A potential energy diagram for the formation of various absorbates with their transition states has been established for the HN3/TiO2 system. On the basis of the predicted desorption energies, the four most stable products of the HN3 reaction on TiO2 are H-O(a), 118 kcal/mol; HN-O(a), 85 kcal/mol; Ti-N2N(H)-O(a), 36 kcal/mol; and N3-O(a), 19 kcal/mol.     

A facile synthesis of highly functionalized dihydrofurans based on 1,4-diazabicyclo[2.2.2]octane (DABCO) catalyzed reaction of halides with enones

Treatment of halides 5 with electrophilic alkenes 2 afforded the corresponding dihydrofurans 3 and 4 in the presence of 1, 4-diazabicyclo[2.2.2]octane (DABCO) with good to excellent yields and in a stereoselective manner in most cases. Moreover, the stereoisomers 3 and 4 could be easily transformed each other in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU).     

Biosorption of americium-241 by Saccharomyces cerevisiae

The biosorption of radionuclide ²⁴¹Am from solution by Saccharomyces cerevisiae (S. cerevisiae), and the effects of experimental conditions on the adsorption were investigated. The preliminary results showed thatS. cerevisiae is a very efficient biosorbent. An average of more than 99% of the total ²⁴¹Am could be removed by S. cerevisiae of 2.1 g/l (dry weight) from ²⁴¹Am solutions of 17.54–4386.0 mg/l (2.22 MBq/l–555 MBq/l) with adsorption capacities of 7.45–1880.0 mg/g biomass (dry weight) (0.94 MBq/g–237.9 MBq/g). The adsorption equilibrium was achieved within 1 hour and the optimum pH ranged 1–3. No significant differences on ²⁴¹Am adsorption were observed at 10–45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above ²⁴¹Am concentration. The relationship between concentrations and adsorption capacities of ²⁴¹Am indicated the biosorption process should be described by the Freundlich adsorption isotherm.     

Study on osmotic pressures for aqueous lysozyme and alpha-chymotrypsin-electrolyte solutions with two Yukawa potentials

The equation of state (EOS) of Duh and Mier-y-Terán for one Yukawa potential is expanded to two Yukawa potentials to describe the nonidealities of the charged lysozyme and alpha-chymotrypsin solutions. Instead of the classical DLVO theory, the attractive dispersion and double-layer repulsion interactions are represented by two Yukawa potentials, respectively. For the aqueous lysozyme solutions, the only adjustable dispersion energy parameter epsilon/k is regressed and the average deviation is 1.76%. For the aqueous alpha-chymotrypsin solutions, two adjustable parameters (the molecular weight and dispersion energy parameter) are regressed and the average deviation is 7.62%. Some correlation and prediction results are discussed.