高活性和高稳定性的核壳结构PtPx@Pt/C催化氧还原

在质子交换膜燃料电池中,金属铂是最高效的阴极氧还原催化剂之一,但是铂昂贵的价格严重阻碍了其在燃料电池领域中的大规模商业化应用.通过铂与3d过渡金属(Fe、Co和Ni)合金化可以有效提高催化剂的氧还原活性,然而在实际的高腐蚀性、高电压和高温的燃料电池运行环境中,铂合金纳米粒子易发生溶解、迁移和团聚,从而导致催化剂耐久性差.同时过渡金属离子的溶出会影响质子交换膜的质子传导,并且一些过渡金属离子会催化芬顿反应,产生高腐蚀性?OH自由基,加快Nafion和催化剂的劣化.与过渡金属掺杂相比,非金属掺杂具有明显优势:一方面,非金属溶出产生的阴离子不会取代Nafion中的质子,也不会催化芬顿反应;另一方面,与3d过渡金属相比,非金属具有更高的电负性,其掺杂很容易调节Pt的电子结构.因此,本文通过非金属磷掺杂合成具有优异稳定性的核壳结构PtPx@Pt/C氧还原催化剂.通过热处理磷化商业碳载铂形成磷化铂(PtP2),经由酸洗处理产生富铂壳层,即PtPx@Pt/C.X射线粉末多晶衍射结果证明了PtP2相的存在,并且进一步通过电子能量损失谱对纳米粒子进行微区面扫描分析以及X射线光电子能谱分析证实了富铂壳层的存在,壳层厚度约1 nm.得益于核壳结构及磷掺杂引起的电子结构效应,PtP1.4@Pt/C催化剂在0.90 V(RHE)时的面积活性(0.62 mA cm–2)与质量活性(0.31 mAμgPt–1)分别是商业Pt/C的2.8倍和2.1倍.更重要的是,在加速耐久性测试中,PtP1.4@Pt/C催化剂在30000圈电位循环后质量活性仅衰减6％,在90000圈电位循环后仅衰减25％;而商业Pt/C催化剂在30000圈电位循环后就衰减46％.PtP1.4@Pt/C催化剂高活性与高稳定性主要归功于核壳结构、磷掺杂引起的电子结构效应以及磷掺杂增加了碳载体对催化剂粒子的锚定作用进而阻止了其迁移团聚.综上所述,本文为设计同时具有优异活性与稳定性非金属掺杂Pt基氧还原催化剂提供新的思路.     

钼酸根阴离子在增强聚苯胺包覆的镍钴层状氢氧化物的电容和析氧行为中的关键作用

理论容量大且过电位低的层状氢氧化物(LDHs)是极有前景的超级电容电池和析氧反应的电极材料;然而,体相LDHs的低电导率和活性位点不足增加了电极的内阻,降低了电极容量和产氧效率.本文采用两步法制备了聚苯胺包覆的MoO42?插层的镍钴层状双金属氢氧化物复合电极(M-LDH@PANI).随着LDH中MoO42?含量的增加,针状的LDH微球逐渐演化为具有较高比表面积的片状M-LDH微球,这为整个电极提供了更多的电化学位点.此外,非晶态的聚苯胺包覆提高了复合电极的电导率.在引入适量MoO42?插层离子时,M-LDH@PANI表现出显著强化的储能和催化性能.所获得的M-LDH@PANI-0.5在析氧反应中表现出优越的电催化活性(10 mA cm?2时的过电位为266 mV),作为超级电容电池电极则具有864.8 C g?1的高容量.采用M-LDH@PANI-0.5作为正极及以活性炭作为负极组装的超级电容电池在功率密度为8,300.0 W kg?1时能量密度为44.6 Wh kg?1,且具有优异的循环稳定性(10000次循环后保留83.9％的初始容量).本文为LDH基材料的阴离子插层改性增强材料性能的机理提供了一个非传统的解释.在上述研究基础上,采用射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)和比表面积测试(BET)等手段对样品进行了深入表征.XRD结果表明,MoO42?插层的LDH材料的层间晶面(003)的峰随着MoO42?含量的增加而逐渐消失,这是由于晶面间距越大越容易受到晶粒细化的影响,间距大的晶格更容易受到破坏,导致晶格的展宽和弱化,从而间接证明MoO42?的成功插层.SEM、HRTEM和BET测试结果表明,MoO42?的含量对材料的形貌和比表面积具有重大影响.利用XPS对样品的价态进行了研究,发现随着MoO42?含量的增加,Co和Ni的价态没有明显变化.电化学测试结果表明,电极的储能和催化性能随MoO42?含量的增加而先增加后减小.利用理论计算分析了MoO42?在LDH中的插层行为,发现少量的MoO42?有利于扩大LDH的层间间距,而过量的MoO42?则会与LDH的H原子结合,从而与电解液中的OH?竞争,导致复合电极的电化学性能下降.此外,MoO42?插层的片状微球能有效调节材料的去质子化能,大大加速电极表面的氧化还原反应.因此,MoO42?插层能够显著强化LDH基材料的超级电容电池电极和OER催化剂电化学性能.     

电极界面浓差极化对锂金属沉积的影响

锂金属作为下一代高能量密度电池的理想负极材料受到研究人员广泛关注。然而,锂枝晶生长引起的安全隐患和循环寿命短等问题严重影响了锂金属电池的实用化进程。本文以电化学现象和理论为依据,从浓差极化角度详细分析锂金属电沉积过程中枝晶生长、死锂形成和全电池失效机制,并对目前研究较多的多孔宿主电极中的浓差极化及枝晶抑制进行分析,提出锂金属界面浓差电池现象。本文得到的结论为研究人员更深入地探究锂金属保护策略提供了理论依据。     

Comprehensive Mechanism for CO Electroreduction on Dual-Atom-Catalyst-Anchored N-Doped Graphene

Carbon neutrality has drawn increasing attention for realizing the carbon cyclization and reducing the greenhouse effect. Although the C1 products, such as CO, can be achieved with a high Faraday efficiency, the targeted production of C2 fuels as well as the mechanism have not been systematically investigated. In this work, we carry out a first-principles study to screen dual-atom catalysts (DACs) for producing C2 fuels through the electrocatalytic carbon monoxide reduction reaction (e-CORR). We find that methanol, ethanol and ethylene can be produced on both DAC−Co and DAC−Cu, while acetate can be achieved on DAC−Cu only. Importantly, methanol and ethylene are preferred on DAC−Co, while acetate and ethylene on DAC−Cu. Furthermore, we show that the explicit solvent can enhance the adsorption and influence the protonation steps, which subsequently affects the protonation and dimerization behavior as well as the performance and selectivity of e-CORR on DACs. We further demonstrate that the C−C coupling is easy to be formed and stabilized if the Integrated Crystal Orbital Hamilton Population (ICOHP) is low because of the low energy barrier. Our findings provide not only guidance on the design of novel catalysts for e-CORR, but an insightful understanding on the reduction mechanism.     

Simple fabrication of Cu~(2+) doped calcium alginate hydrogel filtration membrane with excellent anti-fouling and antibacterial properties

Herein,copper ion doped calcium alginate(Cu~(2+)/CaAlg) composite hydrogel filtration membranes were prepared by using natural polymer sodium alginate(NaAlg) as raw material.The thermal stability and structure of the composite membranes were characterized by thermogravimetric analysis and infrared spectroscopy.The mechanical strength,anti-fouling performance,hydrophilicity and filtration performance of the membrane were studied.The results show that Cu~(2+)/CaAlg hydrogel membrane has excelle nt mechanical properties and thermal stability.The anti-swelling ability of the membrane was greatly enhanced by doping Cu~(2+).After three alternate filtration cycles,the flux recovery rate of Cu~(2+)/CaAlg hydrogel membrane can still reach 85%,indicating that the membrane has good antipollution performance.When the operation pressure was 0.1 MPa,the rejection of coomassie brilliant blue G250 reached 99.8% with a flux of 46.3 L m ~2 h ~1,while the Na_2 SO_4 rejection was less than 10.0%.The Cu~(2+)/CaAlg membrane was recycled after 24 h in the filtration process,and its flux and rejection rate did not decrease significantly,indicating that the hydrogel membrane has long-term application potential.The Cu~(2+)/CaAlg membrane has a wide range of applications prospect in dye desalination,fine separation and biopharmaceutical technology fields.     

Catalytic transfer hydrogenation of biomass-derived furfural to furfuryl alcohol with formic acid as hydrogen donor over CuCs-MCM catalyst

Catalytic transfer hydroge nation(CTH) of furfural(FF) to furfu ryl alcohol(FFA) has received great intere st in recent years.He rein,Cu-Cs bimetallic supported catalyst,CuCs(2)-MCM,was developed for the CTH of FF to FFA using formic as hydrogen donor.CuCs(2)-MCM achieved a 99.6% FFA yield at an optimized reaction conditions of 170℃,1 h.Cu species in CuCs(2)-MCM had dual functions in catalytically decomposing formic acid to generate hydrogen and hydrogenating FF to FFA.The doping of Cs made the size of Cu particles smaller and improved the dispersion of the Cu active sites.Impo rtantly,the Cs species played a favorable role in enhancing the hydrogenation activity as a promoter by adjusting the surface acidity of Cu species to an appropriate level.Correlation analysis showed that surface acidity is the primary factor to affect the catalytic activity of CuCs(2)-MCM.     

海生物附著对钢板管椿腐蚀之影响

为了解海生物对钢板管椿腐蚀之影响 ,将SS4 1金属试片浸渍于高雄港 #1 4码头水深 3m处及实验室人造海水中 .试验期间 ,以DC直流动电位极化曲线扫描与AC交流电阻抗分析现场量测各试片的瞬间腐蚀速率 .结果发现 :宏观地看 ,海生物在金属 (或锈层 )表面的附著可以减缓金属腐蚀 ,但从微观 (micro)的观点推论 ,海生物在金属表面的附著亦可以造成氧差或浓度差异电池 ,促成局部腐蚀 .此外 ,等效电路的模拟 ,有助于了解海生物附著对金属腐蚀的影响 ,即随浸渍时间的延长 ,金属表面因锈层增厚且趋于致密 ,以致锈层电阻增加 ;又因海生物种类不同 ,含水量不同 ,海生物电阻可能会有极大的差异     

Dienone—phenol Rearrangement of C—9 Oxygenated Decalinic Dienone and Analogs through B—Ring Cleavage

Dehydrogenation of 9-hydroxy decalinic enones and analogs with DDQ resulted in a formal dienone-phenol type rearrangement via B-ring cleavage, while the corresponding dienone acetates underwent base-catalyzed formal dienone-phenol type rearrangement analogously.     

A Model Calculation for the Isomerization and Decomposition of Chemisorbed HCN on the Si(100)-2×1 Surface

Ab initio molecular orbital and hybrid density functional theory calculations have been performed to study the adsorption, isomerization, and decomposition of HCN on Si(100)-2×1 using the Si₉H₁₂ cluster model of the surface. The results of our calculations indicate that the HCN can adsorb molecularly without a barrier onto the surface with both end-on (LM1) and side-on (LM2) positions. LM1 can isomerize to LM2 with a small barrier of 8 kcal/mol. The isomerization of LM2 by H-migration from C to the N atom, requires 76 kcal/mol activation energy (c.f. 47.5 kcal/mol in the gas phase) because of surface stabilization. Both HCN(a) and HNC(a) end-on adsorbates were found to dissociate readily, as concluded in our earlier experiment, to produce H and CN adspecies. The computed vibrational frequencies of HCN, CN, and also HCNH adspecies agree reasonably well with those observed experimentally. HCNH was found to be stable, with either the C or the N attaching to the surface.     

Dynamics of Atomic and Molecular Hydrogen Elimination from Hydrocarbons at VUV Excitation

Elimination of atomic hydrogen (H) and molecular hydrogen (H₂) are important elementary chemical processes in photochemistry and combustion chemistry. Recently, unique and sensitive detection techniques for atomic and molecular hydrogen detection were developed in our laboratory. Using the advanced molecular beam methods, we have studied the photodissociation of a few typical hydrocarbons at 157 nm excitation, especially their atomic and molecular hydrogen elimination processes. In this report, we will briefly describe the results from photodissociation of propane, ethylene, propyne and methanol at 157 nm excitation. These molecules represent different classes of hydrocarbons such as alkane, alkene, alkyne and alcohol. Through careful studies on differently deuterated compounds, clear pictures of selective atomic and molecular hydrogen elimination processes can be constructed for all of the above compounds. These results will help us to understand the dissociation dynamics of the small hydrocarbon molecules.