Skin Necrosis due to Photodynamic Action of Benzoporphyrin Depends on Circulating Rather than Tissue Drug Levels: Implications for Control of Photodynamic Therapy

In an ideal world, photodynamic therapy (PDT) of abnormal tissue would reliably spare the surrounding normal tissue. Normal tissue responses set the limits for light and drug dosimetry. The threshold fluence for necrosis (TFN) was measured in normal skin following intravenous infusion with a photosensitizer, benzoporphyrin derivative monoacid ring A (BPD-MA) Verteporfin as a function of drug dose (0.25-2.0 mg/kg), wavelength of irradiation (458 and 690 nm) and time interval (0–5h) between drug administration and irradiation. The BPD-MA levels were measured in plasma and skin tissue to elucidate the relationship between TFN, drug kinetics and biodistribution. The PDT response of normal skin was highly reproducible. The TFN for 458 and 690 nm wavelengths was nearly identical and the estimated quantum efficiency for skin response was equal at these two wavelengths. Skin phototoxicity, quantified in terms of 1/ TFN, closely correlated with the plasma pharmacokinetics rather than the tissue pharmacokinetics and was quadratically dependent on the plasma drug concentration regardless of the administered drug dose or time interval between drug and light exposure. This study strongly suggests that noninvasive measurements of the circulating drug level at the time of light treatment will be important for setting optimal light dosimetry for PDT with liposomal BPD-MA, a vascular photosensitizer.     

一些金属氧化物在TiO_2(锐钛矿)载体上的分散 嵌入模型的应用

一些金属氧化物在ＴｉＯ２（锐钛矿）载体上的分散＊嵌入模型的应用徐斌董林陈懿（南京大学化学系亚微观固态化学研究所，南京２１００９３）关键词嵌入模型，金属氧化物，分散容量，锐钛矿我们曾以γ－Ａｌ２Ｏ３，ＣｅＯ２和ＳｉＯ２为载体研究了离子化合物的分散，认为...     

Examination of the modified monostandard method in neutron activation analysis

The reproducibility, the small scale as well as the large scale variability of¹³⁷Cs extracted sequentially from the soil by using a modified Tessier procedure was investigated at several grassland sites in Bavaria/Germany and in the Chemobyl area. Because undisturbed grassland soils are never homogeneous with respect to their soil properties, all sequential extractions at the German sites were carried out at each plot separately for different soil layers (e.g., 0–2, 2–5, 5–10, 10–15, 15–20 and 20–30 cm). The results show that the coefficients of variation (CV) for the reproducibility of the extraction procedure for¹³⁷Cs was (with some exceptions) around 10–20% for all fractions. For the small scale variability of¹³⁷Cs (samples within an area of 10×10m²) the values for theCV were (again with a few exceptions) in the same range. Compared to that, the large scale variability of extractable¹³⁷Cs (random soil samples within an area of 100×200 km²) was higher for all fractions, even though only moderately. The implications of these results with respect to a sampling design are discussed.     

The dependence of sorbent/analyte type on observed differences in supercritical fluid extraction efficiencies employing extraction vessels of different dimensions

Summary The effect of extraction cell dimensions (i.d.: length) on supercritical fluid extraction (SFE) efficiencies of polychlorinated biphenyls (PCBs) is shown to be dependent on the type of sorbent used. For octadecylsilane (C18) sorbents, there is a significant increase in observed SFE recoveries of PCBs when the cell dimensions are made more broad (increased i.d.: length); whereas, no effect of cell geometry is observed when the common adsorbent, Florisil, is utilized. Additionally, recoveries decreased in proportion to the chlorine number, for the PCBs studied, for octadecylsilane sorbents, while no such effect was observed for Florisil. These results illustrate the magnitude of the matrix effect in SFE, which generally dominated observed recoveries, even in the simplest analyte/sorbent systems such as the one studied here.     

Enthalpies of Dilution of D-p-Hydroxyphenylglycine in Buffer Solutions at Different pH

The effect of pH on the dilution enthalpies of D-p-hydroxyphenylglycine in phosphate buffer solutions has been investigated by isothermal titration microcalorimetry at 298.15 K. The corresponding homogeneous enthalpic interaction coefficients have been calculated according to the excess enthalpy concept. The results show that the enthalpies of dilution of D-p-hydroxyphenylglycine in phosphate buffer solutions at different pH are all positive. The overall trend is that enthalpies of dilution become more positive with an increase of pH, but there is a minimum of the enthalpy of dilution at pH = 7.0. The enthalpic pair interaction coefficients, h ₂, all have negative values. The results are interpreted from the point of view of solute-solute and solute-solvent interactions involved in the solvent effects.     

IR STUDIES OF THE THERMAL DECOMPOSITION OF[Rh_6(CO)_(16) Co_4(CO)_(12)]/SiO_2: EVIDENCE FOR THE FORMATION OF RhCo_3(CO)_(12)/SiO_2

IntroductionThepreparativeapproachofaneffectivebilTldslliccatalystisalwaysasubjectofboortantsignificanceinheterogeneouscatalysis.InourrecentstUdies,wefoundthatthebAnetallitcarbonylclustercoCo3(CO)12favorablygivesthebAnetalliccoCo3clusterontheSiOZsubdueaft…     

八十年代海洋天然有机化学的进展

八十年代以来,海洋天然有机化学仍然继续发展,大量新的化合物,尤其是具有生理活性的化合物不断出现,海洋天然物的生物合成和人工合成研究也有新的进展。在海洋生物中,研究得最多的是海藻和海绵,其次便是珊瑚。     

Synthesis and Characterization of Base‐catalyzed Phenyl Modified PDMS/PHMS Copolymers

A series of phenyl modified polydimethylsiloxane (PDMS) / polyhydrogenmethylsiloxane (PHMS) random copolymers containing both internal Si‐H and terminal SiH₂ and T (MeSiO_3/2) units was synthesized in one step through n‐BuLi‐catalyzed ring‐opening polymerization of cyclic comonomers and characterized by GPC, IR and ¹H and ²⁹Si NMR. Sequential microstructures of these copolymers were determined by ²⁹Si‐NMR spectroscopy. Epoxy‐modified polysiloxanes were prepared and used as comparable standards for the assignment of the NMR spectra. A hydride‐transfer mechanism has been proposed to account for the formation of terminal Si‐H and T group. Detailed sequential analyses and chemical shifts of ²⁹Si‐NMR for various siloxane units are reported for the first time.     

Sesquiterpenoids and Phenylpropane Derivatives from Sonchus uliginosus

Six new compounds were isolated from the whole plant of Sonchus uliginosus, including three eudesmane‐type sesquiterpenoids (1β,6α)‐1,6,14‐trihydroxyeudesm‐3‐en‐12‐oic acid γ‐lactone ( 1 ), (1β,6α)‐1,6,14‐trihydroxyeudesma‐3,11(13)‐dien‐12‐oic acid γ‐lactone ( 2 ), and (1β,6α)‐1,6‐dihydroxy‐14‐O‐[(4‐hydroxyphenyl)acetyl]eudesma‐3,11(13)‐dien‐12‐oic acid γ‐lactone ( 3 ), and three phenylpropane derivatives, 4‐hydroxy‐γ,3,5‐trimethoxybenzenepropanol ( 6 ), γ,3,4,5‐tetramethoxybenzenepropanol ( 7 ), and γ,3,4,5‐tetramethoxybenzenepropanol acetate ( 8 ), together with the two known compounds 4 and 5 . The new structures were elucidated by means of spectroscopic methods, such as IR, EI‐MS, HR‐ESI‐MS, 1D‐ and 2D‐NMR, and by comparison of the spectroscopic data with those reported for structurally related compounds.     

Copper‐Bismuth Bimetallic Microspheres for Selective Electrocatalytic Reduction of CO2 to Formate

Electrocatalytic carbon dioxide reduction holds great promise for reducing the atmospheric CO₂ level and alleviating the energy crisis. High‐performance electrocatalysts are often required in order to lower the high overpotential and expedite the sluggish reaction kinetics of CO₂ electroreduction. Copper is a promising candidate metal. However, it usually suffers from the issues of poor stability and low product selectivity. In this work, bimetallic Cu‐Bi is obtained by reducing the microspherical copper bismuthate (CuBi₂O₄) for selectively catalyzing the CO₂ reduction to formate (HCOO^–). The bimetallic Cu‐Bi electrocatalyst exhibits high activity and selectivity with the Faradic efficiency over 90% in a wide potential window. A maximum Faradaic efficiency of ~95% is obtained at –0.93 V versus reversible hydrogen electrode. Furthermore, the catalyst shows high stability over 6 h with Faradaic efficiency of ~95%. This study provides an important clue in designing new functional materials for CO₂ electroreduction with high activity and selectivity.