The Design of Single Mode Large Cross-section Glass-based Waveguides for Photonic Integrated Circuits

This paper presents our recent simulation results and novel designs of single mode large cross-section glass-based waveguides for photonic integrated circuits (PICs). Simulations were performed using an in-house Finite Difference (FD) based mode solver and the FD Beam propagation Method (FD-BPM). Our simulation results show that this innovative technology could provide a simplified means to couple optical energy efficiently between optical components in a single chip. This would provide the base for the future large-scale integration of optical components in PICs. The novel idea of using single mode large cross-section glass-based waveguides as an optical integration platform is an evolutionary innovative solution for the monolithic integration of optical components, in which the glass-based structures act both as waveguides and as an optical bench for integration. This allows easy and efficient optical coupling between optical components and optical fibres, removing costly and tedious alignment problems and considerably reducing optical coupling losses in PICs. We expect that the glass-based waveguide PICs technology will enable the emergence of a new generation of compact, reliable, high speed, and multifunctional devices.     

Influence of the defect structure on the electrical conductivity of Pb5Ge3O11 single crystals at high temperatures

The impedance spectra of Pb₅Ge₃O₁₁ single crystals are measured in the frequency range from 5 Hz to 13 MHz at temperatures of 600 to 800 K in dry air and in a dry or wet nitrogen gas. It is found that the temperature and the gas composition significantly affect the electrical properties of the compound. The data obtained are used to discuss the origin of crystal lattice defects and their influence on charge transfer. It is concluded that the conduction is mixed in character (p-type electronic and ionic due to oxygen ions). The proton conduction is shown experimentally to be feasible. The possible mechanisms of proton transport in Pb₅Ge₃O₁₁ are discussed.     

Comparison of detection efficiencies of negatively charged gold-alkanethiolate-, gold-sulfur- and gold-clusters in ToF-SIMS

In order to improve quantification of high mass ions, the influence of cluster composition on detection efficiencies has been studied using a TOF-SIMS IV with the extended capability of postaccelerating ions up to 20 keV. In this experimental study, we focus on the comparison of detection efficiencies for three types of negatively charged secondary cluster ions: gold-alkanethiolate-clusters (Au_xM_y), gold-sulfur-clusters (Au_xS_y) and gold-clusters (Au_x). The clusters were sputtered from self-assembled monolayers of hexadecanethiols on gold substrates using 10 keV Ar⁺ primary ions. The detection efficiencies were derived on the basis of a function for the secondary electron yield and a fourth-order approximated Poisson probability distribution for electron propagation and amplification within the microchannel plate.In addition to the well-known dependence of detection efficiencies on ion mass and energy, which has already been studied for positively charged ions, we were able to show a similar behaviour for the investigated negatively charged secondary ions. We have observed major variations among the three types of clusters at similar mass and energy as predicted in a theoretical approach. The observed differences are due to the different composition of the investigated clusters which has a major influence on the kinetic ion induced electron emission within the microchannel plate. For the first time it was possible to experimentally verify these predictions for detection efficiencies.     

System of cryostating wide-aperture nonlinear crystals for generating the fifth harmonic of neodymium-laser radiation

Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 51, No. 5, pp. 867–870, November, 1989.     

Decompositions of continuity and complete continuity

We introduce the notions of δ-t-sets, δ_β-t-sets, δ-B-continuity and δ_β -B-continuity and obtain decompositions of continuity and complete continuity.     

Low sintering temperature MnZn-ferrites for power applications in the frequency region of 400 kHz

In this paper, the effect of cubic zinc metaborate Zn₄O(BO₂)₆ on the sintering of MnZn-ferrites for medium frequency power applications is investigated. Zinc metaborate is synthesized in the laboratory using zinc oxide and boric acid as metal precursors. As observed, when zinc metaborate is added to the MnZn-ferrites at an optimum amount of 0.02 wt%, it significantly enhances densification and therefore allows, for a given density, reduction of the firing temperature by almost 200 °C. MnZn-ferrites exhibiting power losses of 70 mW/cm³ (measured at a frequency of 400 kHz, magnetic field 50 mT and temperature of 90 °C) are synthesized from conventionally milled powders with average particle diameter 0.6 μm, compacted and fired at 1100 °C. Identical experiments conducted under the same conditions on specimens without zinc metaborate additions revealed power losses greater than 300 mW/cm³, because of insufficient densification.     

Extraction of strontium using an irradiated extraction agent of crown structure

The partition coefficient of strontium upon its extraction from the aqueous solutions of picric acid into chloroform containing DC-18-crown-6, B-15-crown-5 after their exposition to gamma radiation has been studied. A significant decrease of the partition coefficient in the studied range of doses 10–70 kGy was observed. This effect can be attributed to the radiolytic products of chloroform. The radiation destruction as well as dehydrogenation of crown ethers were not observed.     

The infrared spectra of the halogen isocyanate and thiocyanate vapor molecules

Fourier transform infrared spectroscopy has been used to investigate the IR spectra of the XNCO (X = Cl, Br, I, CN), the XSCN (X = Cl, Br, I) and the NCNCS vapor molecules from 4800 to 400 cm⁻¹. Vibrational frequencies have been determined for each normal mode of vibration in each molecule in this region.     

Mixing methodologies to enhance the implementation of healthcare operational research

Healthcare Operational Research (OR) has had limited success in achieving a sufficient level of stakeholder acceptance to lead to implementation of results. This research study is aimed at combining OR methodologies to achieve greater acceptance of results for organizational change. Patient flow delays in the Paediatric intensive care unit (PICU) at Children's Hospital of Wisconsin were identified using case studies. Patient flow was modelled using hard OR (simulation) using case study findings, with active stakeholder participation, and enhanced with outcomes research. Outcomes research allowed achieving greater clinical relevance of OR findings. Results from hard OR, particularly for politically sensitive issues, were persuasive but inadequate to result in change. Soft OR (cognitive mapping) was used to identify new issues and enhance results. Consequently, the planned PICU expansion was deferred, and resources focused on improving staffing strategies identified independently from both hard and soft OR. These findings suggest that: (1) Outcomes research can play a unique role to enhance results in healthcare OR. (2) After obtaining a holistic understanding of the system using hard and soft OR, stakeholders are willing to implement results from each independently, supporting the development of a common form of knowledge, which is consistent with Mixed-Mode Modelling. (3) Hard OR, enhanced with outcomes research, with active stakeholder participation, and combined with soft OR, results in greater acceptance and sustained organizational change.