A comparative multi-reference configuration interaction study of the low-lying states of two thione isomers of thiophenol

Multi-reference configuration interaction, MR-CI (including extensivity corrections, named +Q), calculations were performed on the S₀–S₃ states of cyclohexa-2,4-diene-1-thione (thione 24 ) and cyclohexa-2,5-diene-1-thione (thione 25 ), which are thione isomers of thiophenol. Several types of uncontracted MR-CIS and MR-CISD wavefunctions were employed, comprising MR-CI expansions as large as ~365 × 10⁶ configuration state functions. The nature of the studied excited states was characterized. Vertical excitation energies (ΔE) and oscillator strengths (f) were computed. The most intense transitions (S₀ → S₂ for 24 and S₀ → S₃ for 25 ) did not change with the wavefunction, although a variation as large as ~1 eV was obtained for the S₃ state of 24 , at the highest (MR-CI+Q) level. On the other hand, ΔE changed at most by ~0.56 eV for 25 as the wavefunction changes, at the same level. The S₁ state of both thiones was found to have nπ* character and is in the visible region. For 24 , S₂ and S₃ are ππ* and nπ* states, respectively, while for 25 the reverse order is obtained. S₂ and S₃ are in the range ~3.5 to 5.2 eV, again at the highest level. It is the first time that the excited states of the title molecules are studied. The computed results agree with the experimental onset of photoreactions of thiones 24 and 25 found by Reva et al (Phys. Chem. Chem. Phys., 2015 , 17, 4888).     

Vitamin C and Phenolic Antioxidants of Jua (Ziziphus joazeiro M.) Pulp: A Rich Underexplored Brazilian Source of Ellagic Acid Recovered by Aqueous Ultrasound-Assisted Extraction

Jua (juá in Portuguese) is an underexplored fruit from Brazil’s northeast. This fruit is rich in antioxidant substances. However, there is a dearth of information about jua’s bioactive potential. The present study evaluated two extraction methods (continuous agitation and ultrasound-assisted extraction—UAE) and employed three different solvents (water, ethanol, and acetone) to efficiently recover soluble phenolic compounds. Aqueous extracts obtained by UAE showed the highest total phenolic content (TPC) and antiradical activity. Besides being an eco-friendly procedure, extraction and/or solubility in an aqueous medium is also important for food application. Ellagic acids were the predominant phenolics (80%) found in aqueous jua pulp extract obtained by UAE, as determined by HPLC, while its TPC was 405.8 gallic acid equivalent per gram of fruit. This extract also exhibited a higher scavenging activity towards peroxyl radicals when compared to that of several other fruits from the literature, including grape, strawberry, cranberry, and walnuts, which are known references in terms of antioxidants. This is the first report that demonstrates jua pulp’s potential as an alternative source of ellagic acid and other phenolic acids and flavonoids. Therefore, the outcome of this study provides new information that can be useful for functional food and nutraceutical industries.     

Simultaneous voltammetric determination of carbendazim and carbaryl in medicinal plant infusions with a boron-doped diamond electrode

This study is aimed to develop an electroanalytical methodology using a boron-doped diamond electrode to determine simultaneously and selectively carbendazim (CBZ) and carbaryl (CAR). In previous studies using cyclic voltammetry oxidation, peaks were observed at 1.03 V (CBZ) and 1.44 V (CAR), with characteristics of an irreversible process controlled by diffusion of species, with a supporting electrolyte of BR buffer (0.1 mol L^?1) and pH adjusted to 6.0. The differences between the potentials for both pesticides, about 400 mV, indicate the possibility of selective determination of CBZ and CAR. The square-wave voltammetric parameters were optimised. The best separation conditions were pH 6.0, square-wave frequency of 100 s^?1, pulse amplitude of 50 mV and scan increment of 2.0 mV. These parameters were used to obtain the calibration curves of CBZ and CAR. An analytical curve was constructed in the range concentration of CBZ of 1.3 mg L^?1 to 15.3 mg L^?1 and CAR of 1.0 mg L^?1 to 11.4 mg L^?1, respectively. The limits of detection (LOD) and limits of quantification (LOQ) for CBZ were 0.40 mg L^?1 and 1.30 mg L^?1, respectively. For CAR, the LOD and LOQ were 0.30 mg L^?1 and 1.00 mg L^?1, respectively. Sensitivity values were 0.78 and 2.60 µA/mg L^?1 for CBZ and CAR, respectively. The electroanalytical method was applied in Mikania glomerata infusions. The recovery values were 106.2% and 116.5% for CBZ and CAR, respectively. The results show that the developed method is suitable for application in medicinal plant samples.     

Effects of diclofenac on EPC liposome membrane properties

In this work the interaction of a non-steroidal anti-inflammatory drug (NSAID), diclofenac, with egg yolk phosphatidylcoline (EPC) liposomes, used as cell-membrane models, was quantified by determination of the partition coefficient. The liposome/aqueous phase partition coefficient was determined by derivative spectrophotometry, fluorescence quenching, and measurement of zeta-potential. Theoretical models based on simple partition of the diclofenac between two different media, were used to fit the experimental data, enabling the determination of K_p. The three techniques used yielded similar results. The effects of the interaction on the membranes characteristics were further evaluated, either by studying membrane potential changes or by effects on membrane fluidity. The liposome membrane potential and the size and size-homogeneity of liposomes were measured by light scattering. The effects of diclofenac on the internal viscosity or fluidity of the membrane were determined by use of spectroscopic probes—a series of n-(9-anthroyloxy) fatty acids in which the carboxyl terminal group is located at the interfacial region of the membrane and the fluorescent anthracene group is attached at different positions along the fatty acid chain. The location of the diclofenac on the membrane was also evaluated, by fluorescence quenching using the same series of fluorescent probes. Because the fluorescent anthracene group is attached at different positions along the fatty acid chain, it is possible to label at a graded series of depths in the bilayer. The interactions between the drug and the probe are a means of predicting the location of the drug on the membrane.     

A thionine-based reversible redox sensor in a sequential injection system

According to the current demands of Green Analytical Chemistry and regarding the need for lower reagent consumption with improved analytical performance, an automatic methodology with a flow-through optosensor incorporating solid-phase spectrophotometric detection was developed. The sensor used in this work was based on the redox state of thionine whose oxidized form is blue and reduced form is colorless with monitoring carried out at 621 nm. This redox indicator was immobilized on gel beads and subsequently packed into a flow-through cell. It was then assembled into a sequential injection system and was shown to be an excellent alternative to monitor enzymatic redox reactions automatically as the redox catalysis is performed by glucose dehydrogenase. This enzyme is a representative dehydrogenase enzyme and uses NAD⁺ as cofactor, promoting the oxidation of glucose to glucono-lactone and reduction of NAD⁺ to NADH. The produced NADH promotes color depletion on the surface of the sensor. The calibration graph for glucose was linear between 5.74 × 10⁻⁴ and 2.00 × 10⁻³ mol L⁻¹ and detection limit was 1.72 × 10⁻⁴ mol L⁻¹. Glucose concentration in different samples including sera, salines, perfusion solutions, powder for preparing oral solutions and solutions for hemodialysis was determined. The method proved to be reproducible with a RSD < 5% for glucose determinations.     

Letter: Bounds on the Deficit Solid Angle Parameter from Solar System Tests

We analyze the Mercury perihelion precession, the bending of starlight, and the radar echo delay in the Schwarzschild field modified by the presence of a solid angle deficit. By using the experimental data we obtain that the parameter characterizing the solid angle deficit is less than 10^–9, 10^–8 and 10^–9, respectively, on the length scales associated with such phenomena. In particular, if the solid angle deficit is generated by a global monopole, it is shown that within the length scales associated with such phenomena, the observational data available constrain the monopole energy scale to lower bounds which are in considerable agreement with the limits derived from grand unified theory and cosmology.     

Electrochemical studies and square wave adsorptive stripping voltammetry of the antidepressant fluoxetine

The electrochemical reduction of the antidepressant drug fluoxetine was investigated by cyclic, linear sweep, differential pulse and square wave voltammetry using a hanging mercury drop electrode in alkaline buffer solution in water and in a water/acetonitrile mixed solvent. Cyclic voltammograms in aqueous solution showed very strong adsorption of fluoxetine on the electrode with formation of a compact film. The effect of addition of different percentages of acetonitrile on the voltammetric response was evaluated. It is shown that acetonitrile protects the electrode surface, thus preventing the adsorption of fluoxetine as a compact film, although reduction occurs at more negative potentials. Adsorption was used to accumulate the drug onto the electrode surface. The adsorbed species were measured voltammetrically by reduction at -1.3 V in an aqueous 0.05 M Ringer buffer, pH 12, 20% acetonitrile v/v. Linear calibration graphs were obtained in the range 0.52-5.2 M. The quantification of fluoxetine in pharmacological formulations existing in the market was performed using adsorptive square wave cathodic stripping voltammetry. and compared with data from UV spectrophotometry. The method is simple and not time-consuming. A comparative high performance liquid chromatography assay with UV detection was performed. Recovery data for both methods are reported.     

Effects of culture conditions on protease production byStreptomyces clavuligerus growing on soy bean flour medium

The influence of nitrogen and phosphate sources on the production of extracellular protease activity byStreptomyces clavuligerus has been investigated. The experiments were carried out in batch fermentation using soy-bean flour as nitrogen source and potassium phosphate dibasic as phosphate source. High protease yield was obtained after 24 h of fermentation with an initial pH of 7.0. The maximal protease activity (112.68 and 88.72 U/mg) was obtained the phosphate concentration of the 21 and 29 mM for strains 3585 and 644, respectively. With regard to the nitrogen concentration in both strains, the maximal protease activity was achieved with 0.5% (154.89 U/mg and 228.36 U/mg for 3585 and 644 strains, respectively). Enzyme production appeared to be modulated by an inducer system where ammonia, complex nitrogen, and phosphate sources might have been involved.