In vivo determination of the volatile metabolites of saprotroph fungi by comprehensive two‐dimensional gas chromatography

In this work, we discuss the use of multiway principal component analysis combined with comprehensive two‐dimensional gas chromatography to study the volatile metabolites of the saprophytic fungus Memnoniella sp. isolated in vivo by headspace solid‐phase microextraction. This fungus has been identified as having the ability to induce plant resistance against pathogens, possibly through its volatile metabolites. Adequate culture media were inoculated, and its headspace was then sampled with a solid‐phase microextraction fiber and chromatographed every 24 h over seven days. The raw chromatogram processing using multiway principal component analysis allowed the determination of the inoculation period, during which the concentration of volatile metabolites was maximized, as well as the discrimination of the appropriate peaks from the complex culture media background. Several volatile metabolites not previously described in the literature on biocontrol fungi were observed, as well as sesquiterpenes and aliphatic alcohols. These results stress that, due to the complexity of multidimensional chromatographic data, multivariate tools might be mandatory even for apparently trivial tasks, such as the determination of the temporal profile of metabolite production and extinction. However, when compared with conventional gas chromatography, the complex data processing yields a considerable improvement in the information obtained from the samples.     

Quenching of singlet molecular oxygen, O2(1Deltag), by dipyridamole and derivatives

Dipyridamole (DIP) is known for its vasodilating and antiplatelet activity, exhibiting also a potent antioxidant effect, strongly inhibiting lipid peroxidation. This effect has been studied in mitochondria and a correlation between the DIP derivatives' structure, the ability to bind to micelles and biological activity has been suggested. In the present work, the quenching of singlet molecular oxygen, O(2)((1)Delta(g)), by DIP and RA47 and RA25 derivatives was analyzed in acetonitrile (ACN) and aqueous acid solutions. Laser flash photolysis excitation of methylene blue (MB) was made at 532 nm and monomol light emission of O(2)((1)Delta(g)) was monitored at 1270 nm. Bimolecular quenching constants in ACN are consistent with an efficient physical quenching, presenting values a bit lower than the diffusion limit (k(t) = 3.4-6.8 x 10(8) M(-1 )s(-1)). The quenching process probably occurs via reversible charge transfer with the formation of an exciplex. Calculation of DeltaG(et) associated with O(2)((1)Delta(g)) quenching corroborates with uncompleted electron transfer. In aqueous acid solutions (pH = 3.0), the k(t) values for DIP and derivatives are 20-fold smaller when compared with ACN. The electrochemical properties of DIP in ACN are characterized by two consecutive one-electron processes with half-wave oxidation potentials of 0.30 and 0.67 V vs saturated calomel electrode (SCE). However, in an aqueous acid medium, a single oxidation wave is observed involving a two-electron process (0.80 V vs SCE). Therefore, O(2)((1)Delta(g)) quenching is consistent with electrochemical data.     

Multi-pumping flow systems: the potential of simplicity

Nowadays, the trend towards more compact, smarter and simpler devices is generally recognized as one of the most challenging aspects in the development of analytical instrumentation. Modern flow-based procedures do not escape this tendency. The level of integration and automation and the operational functionality of Multi-pumping flow systems (MPFS) would, in most of the situations, meet this requirement. The essential elements of MPFS are multiple solenoid actuated micro-pumps strategically positioned in the flow manifold, which are accountable for solutions insertion, propelling and commutation, conditioning the establishment and subsequent detection of the reaction zone. Being the only active components of the flow manifold they provide a great operational simplicity and assure a straightforward run-time control of important analytical variables. Moreover, the reduction of active components minimizes the probability of occurrence of equipment failures, malfunctions or errors. The low size and low cost of solenoid micro-pumps make them ideal tools to build up compact environmentally friendly analytical systems, which are characterized by low solutions consumptions and the minimisation of hazardous waste generation. Furthermore, the reproducible pulsed flowing stream produced by micro-pumps actuation has proven to be a valuable feature regarding sample/reagent mixing and reaction zone homogenisation.     

Finite volume solution of the modified Poisson-Boltzmann equation for two colloidal particles

The double layer forces between spherical colloidal particles, according to the Poisson-Boltzmann (PB) equation, have been accurately calculated in the literature. The classical PB equation takes into account only the electrostatic interactions, which play a significant role in colloid science. However, there are at, and above, biological salt concentrations other non-electrostatic ion specific forces acting that are ignored in such modelling. In this paper, the electrostatic potential profile and the concentration profile of co-ions and counterions near charged surfaces are calculated. These results are obtained by solving the classical PB equation and a modified PB equation in bispherical coordinates, taking into account the van der Waals dispersion interactions between the ions and both surfaces. Once the electrostatic potential is known we calculate the double layer force between two charged spheres. This is the first paper that solves the modified PB equation in bispherical coordinates. It is also the first time that the finite volume method is used to solve the PB equation in bispherical coordinates. This method divides the calculation domain into a certain number of sub-domains, where the physical law of conservation is valid, and can be readily implemented. The finite volume method is implemented for several geometries and when it is applied to solve PB equations presents low computational cost. The proposed method was validated by comparing the numerical results for the classical PB calculations with previous results reported in the literature. New numerical results using the modified PB equation successfully predicted the ion specificity commonly observed experimentally.     

Enhancement of rhamnoplipid production in residual soybean oil by an isolated strain of Pseudomonas aeruginosa

In the present work, the production of rhamnolipid from residual soybean oil (RSO) from food frying facilities was studied using a strain of Pseudomonas aeruginosa of contaminated lagoon, isolated from a hydrocarbon contaminated soil. The optimization of RSO, ammonium nitrate, and brewery residual yeast concentrations was accomplished by a central composite experimental design and surface response analysis. The experiments were performed in 500-mL Erlenmeyer flasks containing 50 mL of mineral medium, at 170 rpm and 30 +/- 1 degrees C, for a 48-h fermentation period. Rhamnolipid production has been monitored by measurements of surface tension, rhamnose concentration, and emulsifying activity. The best-planned results, located on the central point, have corresponded to 22 g/L of RSO, 5.625 g/L of NH(4)NO(3), and 11.5 g/L of brewery yeast. At the maximum point the values for rhamnose and emulsifying index were 2.2 g/L and 100%, respectively.     

Ion-specific forces between a colloidal nanoprobe and a charged surface

We investigate the effect of ion-specific potentials on the force between a nanoprobe attached to a cantilever tip, and a charged surface. The probe is treated as a spherical nanoparticle with constant charge. A modified Poisson-Boltzmann equation in bispherical coordinates is used to address this problem in a more quantitative way. We predict that the ion-specific series of measured forces depend on the sign and magnitude of surface charge densities.     

NMR assignments of unusual flavonoids from the kino of Eucalyptus citriodora

Two unusual flavonoids, 3,5,4',5'-tetrahydroxy-7-methoxy-6-[1-(p-hydroxy-phenyl)ethyl]flavanone (1) and 3,5,7,4',5'-pentahydroxy-6-[1-(p-hydroxy-phenyl)ethyl] flavanone (2), were isolated from the kino of Eucalyptus citriodora. Structural elucidation of the new compounds were established on the basis of spectral data, particularly by the use of 1D NMR and several 2D shift-correlated NMR pulse sequences ((1)H, (1)H-COSY, HMQC, HMBC).     

Antineoplastics Encapsulated in Nanostructured Lipid Carriers

Ideally, antineoplastic treatment aims to selectively eradicate cancer cells without causing systemic toxicity. A great number of antineoplastic agents (AAs) are available nowadays, with well-defined therapeutic protocols. The poor bioavailability, non-selective action, high systemic toxicity, and lack of effectiveness of most AAs have stimulated the search for novel chemotherapy protocols, including technological approaches that provide drug delivery systems (DDS) for gold standard medicines. Nanostructured lipid carriers (NLC) are DDS that contain a core of solid and lipid liquids stabilised by surfactants. NLC have high upload capacity for lipophilic drugs, such as the majority of AAs. These nanoparticles can be prepared with a diversity of biocompatible (synthetic or natural) lipid blends, administered by different routes and functionalised for targeting purposes. This review focused on the research carried out from 2000 to now, regarding NLC formulations for AAs (antimetabolites, antimitotics, alkylating agents, and antibiotics) encapsulation, with special emphasis on studies carried out in vivo. NLC systems for codelivery of AAs were also considered, as well as those for non-classical drugs and therapies (natural products and photosensitisers). NLC have emerged as powerful DDS to improve the bioavailability, targeting and efficacy of antineoplastics, while decreasing their toxic effect in the treatment of different types of cancer.     

Hydrothermal Synthesis of Silicoaluminophosphate with AEL Structure Using a Residue of Fluorescent Lamps as Starting Material

Silicoaluminophosphate molecular sieves of SAPO-11 type (AEL structure) were synthesized by the hydrothermal method, from the residue of a fluorescent lamp as a source or Si, Al, and P in the presence of water and di-propyamine (DPA) as an organic template. To adjust the P₂O₅/SiO₂ and Si/Al and ratios, specific amounts of silica, alumina, or alumina hydroxide and orthophosphoric acid were added to obtain a gel with molar chemical composition 1.0 Al₂O₃:1.0 P₂O₅:1.2 DPA:0.3 SiO₂:120 H₂O. The syntheses were carried out at a temperature of 473 K at crystallization times of 24, 48, and 72 h. The fluorescent lamp residue and the obtained samples were characterized by X-ray fluorescence, X-ray diffraction, scanning electron microscopy, and BET surface area analysis using nitrogen adsorption isotherms. The presence of fluorapatite was detected as the main crystalline phase in the residue, jointly with considered amounts of silica, alumina, and phosphorus in oxide forms. The SAPO-11 prepared using aluminum hydroxide as Al source, P₂O₅/SiO₂ molar ratio of 3.6 and Si/Al ratio of 0.14, at crystallization time of 72 h, achieves a yield of 75% with a surface area of 113 m²/g, showing that the residue from a fluorescent lamp is an alternative source for development of new materials based on Si, Al, and P.     

Kinetics of the seeded semicontinuous emulsion copolymerization of methyl methacrylate and butyl acrylate

The effect of a chain‐transfer agent (CTA) on the kinetics and molecular weight distribution of the methyl methacrylate/butyl acrylate semicontinuous emulsion polymerization was investigated. The dodecanethiol had a slight effect on the reaction rate but significantly affected the secondary nucleation. The effect of the CTA concentration on the gel formation and the effect of the reaction conditions on the mass‐transfer limitations of the CTA are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 367–375, 2000