Long period grating cascaded to photonic crystal fiber modal interferometer for simultaneous measurement of temperature and refractive index

We propose and demonstrate a novel and simple dual-parameter measurement scheme based on a cascaded optical fiber device of long-period grating (LPG) and photonic crystal fiber (PCF) modal interferometer. The temperature and refractive index (RI) can be measured simultaneously by monitoring the spectral characteristics of the device. The implemented sensor shows distinctive spectral sensitivities of -30.82 nm/RIU (refractive index unit) and 47.4 pm/°C by the LPG, and 171.96 nm/RIU and 10.4 pm/°C by the PCF modal interferometer. The simultaneous measurement of the temperature and external RI is experimentally demonstrated by the sensor. The temperature shift and RI shift calculated by the sensor matrix agree well with the actual temperature and RI change in the experiment.     

Ultrawidely tunable single-mode fiber acousto-optic filter

A single-mode fiber (SMF) acousto-optic tunable filter (AOTF) with a tuning range of more than 300 nm is demonstrated. The SMF used in the experiment has a ring of symmetric holes within the cladding, which causes a larger mode-index difference between the first and the second higher-order antisymmetric modes than those of a conventional SMF. As a result, the difference in beatlengths between the core mode and the higher-order modes is highly increased, which makes it possible for the SMF AOTF to exhibit a single resonance peak in the transmission spectrum over the wavelength range of 1.3-1.6 μm for given acoustic frequencies of 3.1-3.8 MHz.     

Experimental realization of an approximate partial transpose for photonic two-qubit systems

We report the first experimental realization of an approximate partial transpose for photonic two-qubit systems. The proposed scheme is based on the local operation on single copies of quantum states and classical communication, and therefore can be easily applied for other quantum information tasks within current technologies. Direct detection of entanglement, i.e., without performing quantum state tomography, using the partial transpose operation, is also demonstrated.     

Central neurocytoma: typical magnetic resonance spectroscopy findings and atypical ventricular dissemination

PURPOSE: Central neurocytomas (CNCs) are rare neuronal tumors that have a favorable prognosis and lower rate of recurrence compared with other intraventricular neoplasms. Although it may be difficult to distinguish CNC on conventional neuroimaging, typical MR spectroscopy (MRS) features have been reported. We describe the MRI and MRS features of CNC. MATERIALS AND METHODS: Eight patients with CNC were reviewed. Three patients underwent presurgical in vivo single-voxel MRS at short echo time (TE, 35 ms) and multi-voxel MR spectroscopic imaging at long TE (144 ms). The surgically resected tumor specimen of one of these patients was also studied ex vivo using high-resolution magic angle spinning (HRMAS) nuclear magnetic resonance. RESULTS: All eight tumors were located in the lateral ventricles. In six patients, CNC extended into the third ventricle, and in two patients the tumor showed further contiguous intraventricular dissemination into the fourth ventricle. In all three patients who underwent MRS, a characteristic metabolite peak was detected at 3.55 parts per million (ppm) at both long and short TE. HRMAS confirmed the presence of elevated glycine (Gly) at 3.55 ppm, without increase in the concentration of myo-inositol found at the same chemical shift. Elevated choline (at 3.2 ppm) was also seen in all three patients. CONCLUSION: On MRS, CNCs have a typical appearance with a metabolite peak at 3.55 ppm due to increased Gly, and this feature may be helpful in presurgical diagnosis. Although they are rare benign intraventricular tumors, in atypical cases, CNCs can show extensive intraventricular dissemination into the fourth ventricle.     

SnO<Subscript>2</Subscript> nanowires bridged across trenched electrodes and their gas-sensing characteristics

By using a thermal chemical vapor deposition and Au-catalyzed in situ alignment and growth process, SnO₂ nanowires could be bridged across trenched electrodes. In this process, a complicated and individual alignment process could be avoided and a number of devices can be fabricated in one step in a wafer scale. The gas-sensing characteristics of the developed sensor were significantly better when compared to those of other types of NO₂ sensors reported in the literature. When the concentration of NO₂ was 5 ppm, the sensitivity was higher than 150. Especially, the reaction time of 8–14 s was noticeably fast, which is attributed to the microtrench structure beneath the nanowires. PACS 61.46.Fg; 85.35.Kt; 81.15.Gh     

RF-sputtered CrB2 diffusion barrier for Ni/Au Ohmic contacts on p-CuCrO2

Ohmic contacts to p-type CuCrO₂ using Ni/Au/CrB₂/Ti/Au contact metallurgy are reported. The samples were annealed in the 200–700 °C range for 60 s in flowing oxygen ambient. A minimum specific contact resistance of 2 × 10⁻⁵ Ω cm² was obtained after annealing at 400 °C. Further increase in the annealing temperature (>400 °C) resulted in the degradation of contact resistance. Auger Electron Spectroscopy (AES) depth profiling showed that out-diffusion of Ti to the surface of the contact stacks was evident by 400 °C, followed by Cr at higher temperature. The CrB₂ diffusion barrier decreases the specific contact resistance by almost two orders of magnitude relative to Ni/Au alone.     

Digitalized Mirror Array and Its Application in Large Telescope： Principle and Case Studies

In this article, we report the principle and conceptual design of a fundamentally different technology in fabricating high precision aberration free optical devices. The tip-tilt of facet in a mirror array is produced by digitally controlled line-tilts of rows and columns. It has not only provided a cost-effective designing methodology in optical physics but also led to a much finer precision of 1 mili arc sec or less. As examples of the application of the proposed digitalised optics, two case studies have been given： a 10 m Schmidt telescope （off-axis） and an 8 m Cassegrain telescope （on-axis）.     

Enhanced weak-signal sensitivity in two-photon microscopy by adaptive illumination

We describe a technique to enhance both the weak-signal relative sensitivity and the dynamic range of a laser scanning optical microscope. The technique is based on maintaining a fixed detection power by fast feedback control of the illumination power, thereby transferring high measurement resolution to weak signals while virtually eliminating the possibility of image saturation. We analyze and demonstrate the benefits of adaptive illumination in two-photon fluorescence microscopy.