A new chromone, 11-hydroxy-sec-O-glucosylhamaudol from Ostericum koreanum

From the ethyl acetate fraction of the roots of Ostericum koreanum, a new chromone, 11-hydroxy-sec-O-glucosylhamaudol (1) along with the known compounds: four chromones, three coumarins, six phenolic compounds, and three quinic acids were isolated. These compounds were assessed for antioxidant activities in the DPPH radical and superoxide anion radical scavenging assay systems. Among isolates, 4-(2-hydroxy-vinyl)-benzene-1,2-diol (12) showed the most potent DPPH radical scavenging activity (IC(50)=4.80+/-0.62 mug/ml) and superoxide anion radical scavenging activity (IC(50)=11.05+/-0.83 microg/ml) in the xanthine/xanthine oxidase system. The antioxidant activities of 12 were comparable to those of quercetin and luteolin.     

Microstructure effect in the coupling reactions of polymeric organolithium compounds using chlorosilanes

The most important variable affecting the yield in the coupling reactions of polymeric organolithium compounds with chlorosilane compounds has been investigated through size-exclusion chromatographic (SEC) analysis. The coupling reaction of poly(styryl)lithium with dichlorodimethylsilane as a silane-coupling agent provided 44 wt % of the coupling yield. The coupling yield, depending on the chain end reactivity of active polymers, was not greatly affected. The addition of a Lewis base such as N,N,N′,N′-tetramethylethylenediamine (TMEDA) even after complete polymerization of the dienes in hydrocarbon seems to affect the coupling reaction, resulting in decreasing the yield. The 1,2- or 3,4-enchain contents in the polydiene backbones affected the reduction of the linking efficiency in the coupling of the poly(dienyl)lithiums with chlorosilanes as the linking agent. The linking yields of the active polymers including over 75 mol % of 1,2- or 3,4-enchainment on the polydiene segment were below 20 wt %. The linking yields exhibited a dependence not only on the steric requirement of the chain end, but also the microstructure of the polydiene segment. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1743–1753, 1998     

Hamilton cycles,avoiding prescribed arcs,in close-to-regular tournaments

The local irregularity of a digraph D is defined as i_l(D) = max {|d⁺ (x) − d⁻ (x)| : x ϵ V(D)}. Let T be a tournament, let Γ = {V₁, V₂, …, V_c} be a partition of V(T) such that |V₁| ≥ |V₂| ≥ … ≥ |V_c|, and let D be the multipartite tournament obtained by deleting all the arcs with both end points in the same set in Γ. We prove that, if |V(T)| ≥ max{2i_l(T) + 2|V₁| + 2|V₂| − 2, i_l(T) + 3|V₁| − 1}, then D is Hamiltonian. Furthermore, if T is regular (i.e., i_l(T) = 0), then we state slightly better lower bounds for |V(T)| such that we still can guarantee that D is Hamiltonian. Finally, we show that our results are best possible. © 1999 John Wiley & Sons, Inc. J Graph Theory 32: 123–136, 1999     

Simulation of three‐dimensional bubbles using desingularized boundary integral method

A very simple model based on the three‐dimensional desingularized boundary integral method is applied to study the evolution of bubble(s) with or without the presence of solid structures. The choice of the desingularization parameters, which is crucial to the success of the method, is studied in the context of bubble dynamics. With the proper choice of parameters, the new model is far more efficient than previous models with virtually the same level of accuracy being achieved. This is largely attributed to the simplicity of the desingularization method. Furthermore, the new model offers a simple and attractive way for mesh refinement. Although it has limitations in the sense that, with this model the time stepping tends to slow down as two surfaces approach each other, this can be easily rectified by switching over to a direct method so that the two surfaces can be drawn closer as required in the context of jet impact. After this the new model can be reinstated to treat the complicated doubly connected geometry involving toroidal bubbles that would otherwise be very difficult to deal with. Copyright © 1999 John Wiley & Sons, Ltd.     

Fabrication of pellicle beam splitters for optical bus application

The optical bus architecture for on-board applications requires a number of optical splitters with precise split ratios to route part of the input signal. Since hollow metal waveguide provides well collimated beams with very small gap loss, it opens the possibility of inserting discrete optical beam splitters (taps). The optical tap requires low excess loss, polarization insensitivity, temperature stability, minimized walk-off of the propagating beam, and cost effective manufacturing. By benefiting from the mature interference coating technology for polarization insensitivity and temperature stability, we design a pellicle beam splitter based on a static microelec tro-mechanical system (MEMS) and develop processes to fabricate pellicle splitters using wafer level bonding of silicon and glass substrates, with subsequent thinning to 20 μm. With the approaches described in this paper, we have demonstrated optical beam splitters with excess loss of less than 0.17 dB that operate at a data rate of 10 Gb/s showing a clean eye diagram while providing controlled split ratio and polarization insensitivity. We have demonstrated a high yielding MEMS based silicon processing platform which has the potential to provide a cost effective manufacturing solution for optical beam splitters.     

Development of multi-wavelength microsphere fibre laser system for potential sensor applications

A multi-wavelength microsphere laser system, using a chirped fibre Bragg grating and a microsphere resonator as wavelength-selective elements and a high dopant erbium doped fibre as the gain material, has been successfully demonstrated. The multi-wavelength generation of the laser system arises from both the microsphere whispering gallery mode selection and from the additional Raman scattering inside the microsphere cavity when the erbium laser is operating at resonance with the whispering gallery modes. Through an appropriate design and fabrication of a microsphere and of a fibre taper, a selective multi-wavelength fibre laser has been realized when the pump power is above threshold required. The laser output lines created have shown much narrower linewidths than those from conventional fibre lasers and these characteristics are particularly suitable for the range of sensor applications envisaged in the work.     

Exact decoherence dynamics of a single-mode optical field

We apply the influence-functional method of Feynman and Vernon to the study of a single-mode optical field that interacts with an environment at zero temperature. Using the coherent-state formalism of the path integral, we derive a generalized master equation for the single-mode optical field. Our analysis explicitly shows how non-Markovian effects manifest in the exact decoherence dynamics for different environmental correlation time scales. Remarkably, when these are equal to or greater than the time scale for significant change in the system, the interplay between the backaction-induced coherent oscillation and the dissipative effect of the environment causes the non-Markovian effect to have a significant impact not only on the short-time behavior but also on the long-time steady-state behavior of the system.     

Preparation and characterization of nanosized (Y,Bi)VO4:Eu and Y(V,P)O4:Eu red phosphors

Nanosized luminescent (Y,Bi)VO₄:Eu³⁺ and Y(V,P)O₄:Eu³⁺ were synthesized at low temperatures either by a coprecipitation method or by a hydrothermal method from aqueous solutions. The effect of Bi³⁺ ion or P⁵⁺ ion content in the lattice, annealing temperature effects on the crystal structure and the particle size, and the luminescence property of (Y,Bi)VO₄:Eu³⁺ and Y(V,P)O₄:Eu³⁺ nanoparticles were examined with a field-enhanced scanning electron microscopy, XRD, and a spectrofluorometer. The pristine YVO₄:Eu³⁺, (Y,Bi)VO₄:Eu³⁺, or Y(V,P)O₄:Eu³⁺ nanoparticles are 35-50 nm in size. The luminescence spectrum of the Eu³⁺ ion was used to probe its position in the crystal lattice. The dopant ions enter the same lattice sites in the nanocrystalline as in the corresponding bulk material, resulting similar spectral features between them. Photoluminescence intensity is weak for the pristine nanoparticles. Annealing the nanoparticles at temperatures up to 1000 °C results in the increased luminescence intensity (>80% of micrometer-sized phosphors) with the minimal particle growth and the improved particle crystallinity.     

Optimal warranty policies for systems with imperfect repair

We investigate a system whose basic warranty coverage is minimal repair up to a specified warranty length. An additional service is offered whereby first failure is restored up to the consumers’ chosen level of repair. The problem is studied under two system replacement strategies: periodic maintenance before and after warranty. It turns out that our model generalizes the model of Rinsaka and Sandoh [K. Rinsaka, H. Sandoh, A stochastic model with an additional warranty contract, Computers and Mathematics with Applications 51 (2006) 179–188] and the model of Yeh et al. [R.H. Yeh, M.Y. Chen, C.Y. Lin, Optimal periodic replacement policy for repairable products under free-repair warranty, European Journal of Operational Research 176 (2007) 1678–1686]. We derive the optimal maintenance period and optimal level of repair based on the structures of the cost function and failure rate function. We show that under certain assumptions, the optimal repair level for additional service is an increasing function of the replacement time. We provide numerical studies to verify some of our results.