空心NiCo2S4纳米球助催化剂担载ZnIn2S4纳米片用于可见光催化制氢

纳米片与空心球上之间的合理界面调控是开发高效太阳能制氢光催化剂的潜在策略。在各类光催化材料中,金属硫化物由于具有相对较窄的带隙和优越的可见光响应能力而被广泛研究。ZnIn₂S₄是一种层状的三元过渡金属半导体光催化剂,其带隙可控(约2.4 eV)。在众多金属硫化物光催化剂中,ZnIn₂S₄引起了广泛兴趣。然而,单纯的ZnIn₂S₄光催化活性仍然相对较差,主要是因为光生载流子的复合率较高、迁移速率较慢。在半导体光催化剂上负载助催化剂是提升光催化剂性能的一种有效方法,因为它不仅可以加速光生电子和空穴的分离,而且还可以降低质子还原反应的活化能。作为一种三元过渡金属硫化物,NiCo₂S₄表现出较高的导电性、较低的电负性、丰富的氧化还原特性以及优越的电催化活性。这些特性表明,NiCo₂S₄可以作为光催化制氢的助催化剂,以加速电荷分离和转移。此外,NiCo₂S₄和ZnIn₂S₄都属于三元尖晶石的晶体结构,这可能有助于构建具有紧密界面接触的NiCo₂S₄/ZnIn₂S₄复合物,从而提高光催化性能。本文中,将超薄ZnIn₂S₄纳米片原位生长到非贵金属助催化剂NiCo₂S₄空心球上,形成具有强耦合界面和可见光吸收的NiCo₂S₄@ZnIn₂S₄分级空心异质结构光催化剂。最优NiCo₂S₄@ZnIn₂S₄复合样品(NiCo₂S₄含量：ca. 3.1%)的析氢速率高达78 μmol·h^-1,约是纳米片组装ZnIn₂S₄光催化剂析氢速率的9倍、约是1% (w, 质量分数)Pt/ZnIn₂S₄样品析氢速率的3倍。此外,该复合光催化剂在反应中表现出良好的稳定性。荧光和电化学测试结果表明,NiCo₂S₄空心球是一种有效的助催化剂,可促进光生载流子的分离和传输,并降低析氢反应的活化能。最后,提出了NiCo₂S₄@ZnIn₂S₄光催化析氢的可能反应机理。在NiCo₂S₄@ZnIn₂S₄复合光催化剂中,具有高导电性的NiCo₂S₄助催化剂可快速接受ZnIn₂S₄上的光生电子,用以还原质子生成氢气,而电子牺牲剂TEOA捕获光生空穴,进而完成光催化氧化还原循环。该研究有望为基于纳米片为次级结构的分级空心异质结光催化剂的设计合成及其光催化制氢研究提供一定的指导。     

Correction to: Derived from Diaryl-λ3-Iodane-Containing Polyoxometalate: Iodine-Doped Molybdenum Carbide for Efficient Electrocatalytic Hydrogen Evolution

Journal of Cluster Science -     

An Electrochemical Way to Generate Amphiphiles from Hydrazones for the Synthesis of 1,2,4-Triazole Scaffold Cyclic Compounds

An electro-oxidative cyclization pathway in which hydrazones are selected as starting materials to generate amphiphiles by reacting with benzylamines and benzamides was reported. This strategy successfully prepared a series of 1,2,4-triazoles in satisfactory yields. Moreover, the use of cheap stainless steel as the anode, the feasibility to conduct the transformation as a one-pot reaction and the proof that scaling-up these reactions is possible make this transformation attractive for potential application in industry.     

Inhibition of NADP(H) supply by highly active phosphatase-like ceria nanozymes to boost oxidative stress and ferroptosis

Ceria (CeO₂) with phosphatase-like activity is widely recognized as one of the promising nanozymes. In general, shrinkage of the sizes of CeO₂ can generate large active surface areas for dephosphorylation reactions. However, synthesizing CeO₂ with an ultra-small structure while retaining its surface activity and avoiding its aggregation for use in non-redox biological applications has been a continuous challenge. Herein, a phosphatase-mimicking nanozyme CeO₂ with ultra-small, excellent dispersibility, and accessibility, and largely exposed {111} facet was synthesized via a facile one-pot approach. In contrast to previous reports, which focus on enhancing the ·OH-induced cellular damage by peroxidase- or oxidase-like activity of CeO₂, the present work demonstrates the phosphatase-like activity of CeO₂ for boosting ferroptosis by disrupting cellular homeostasis. Cancer cells require high levels of nicotinamide adenine dinucleotide phosphate (NADP(H)) to enhance GSH synthesis and resist to ferroptosis. By virtue of the phosphatase-like activity, the obtained CeO₂ could sustainably dephosphorylate NADP(H) and effectively inhibit the intracellular biosynthesis of GSH. Our results showed that using CeO₂ as a phosphatase-mimicking nanozyme to deplete NADP(H) and its synthetic precursor glucose-6-phosphate (G6P) could attenuate the repair mechanisms under oxidative stress via indirectly inhibiting the supply of intracellular GSH and enhancing the occurrence of ferroptosis. The finding offers new insights into the regulation of ferroptosis by high-efficiency non-redox nanozymes, which could pave the way for the development of phosphatase-mimicking nanozymes.     

Control of pore environment in highly porous carbon materials for C2H6/C2H4 separation with exceptional ethane uptake

Adsorptive separation of C₂H₆ from C₂H₄ by adsorbents is an energy-efficient and promising method to boost the polymer grades C₂H₄ production. However, that C₂H₆ and C₂H₄ display very similar physical properties, making their separation extremely challenging. In this work, by regulating the pore environment in a family of chitosan-based carbon materials (C-CTS-1, C-CTS-2, C-CTS-4, and C-CTS-6)- we target ultrahigh C₂H₆ uptake and C₂H₆/C₂H₄ separation, which exceeds most benchmark carbon materials. Explicitly, the C₂H₆ uptake of C-CTS-2 (166 cm³/g at 100 kPa and 298 K) has the second-highest adsorption capacity among all the porous materials. In addition, C-CTS-2 gives C₂H₆/C₂H₄ selectivity of 1.75 toward a 1:15 mixture of C₂H₆/C₂H₄. Notably, the adsorption enthalpies for C₂H₆ in C-CTS-2 are low (21.3 kJ/mol), which will facilitate regeneration in mild conditions. Furthermore, C₂H₆/C₂H₄ separation performance was confirmed by binary breakthrough experiments. Under different ethane/ethylene ratios, C-CTS-X extracts a low ethane concentration from an ethane/ethylene mixture and produces high-purity C₂H₄ in one step. Spectroscopic measurement and diffraction analysis provide critical insight into the adsorption/separation mechanism. The nitrogen functional groups on the surface play a vital role in improving C₂H₆/C₂H₄ selectivity, and the adsorption capacities depend on the pore size and micropore volume. Moreover, these robust porous materials exhibit outstanding stability (up to 800 °C) and can be easily prepared on a large scale (kg) at a low cost (～$26 per kg), which is very significant for potential industrial applications.     

Ultrafast synthesis of near-infrared-emitting aqueous CdTe/CdS quantum dots with high fluorescence

The traditional aqueous route to synthesis CdTe/CdS Core/shell (c/s) quantum dots (QDs) via decomposition of Cd-thiol complexes is usually time consuming. Herein, an ultrafast and facile aqueous synthetic approach under atmospheric pressure for CdTe/CdS c/s QDs with emission from the green to the near-infrared window (535–820 nm) is reported. With purified CdTe core QDs diluted in solution of Cd-3-mercaptopropionic acid (MPA) complexes, CdTe/CdS c/s QDs with emission wavelengths at 700 and 800 nm can be obtained within 20- and 45-min refluxing under the optimized experimental conditions, respectively. This is the most rapid way to prepare CdTe/CdS c/s QDs in aqueous phase, and the obtained QDs were highly luminescent without postsynthesis treatment. The influences of various experimental factors, including Cd²⁺ concentration, MPA-to-Cd ratio, pH value, and dilution ratio on the growth rate and luminescent properties of the obtained CdTe/CdS c/s QDs, have been taken into consideration. The three processes “purification-dilution-addition” ensure the synthesis environment with high pH value and low core concentration and have a marked impact on the rapid synthesis rate and the resulting high fluorescence of CdTe/CdS c/s QDs.     

Selection of hydrogel electrolytes for flexible zinc–air batteries

Flexible zinc–air batteries attract more attention due to their high energy density, safety, environmental protection, and low cost. However, the traditional aqueous electrolyte has the disadvantages of leakage and water evaporation, which cannot meet application demand of flexible zinc–air batteries. Hydrogels possessing good conductivity and mechanical properties become a candidate as the electrolytes of flexible zinc–air batteries. In this work, advances in aspects of conductivity, mechanical toughness, environmental adaptability, and interfacial compatibility of hydrogel electrolytes for flexible zinc–air batteries are investigated. First, the additives to improve conductivity of hydrogel electrolytes are summarized. Second, the measures to enhance the mechanical properties of hydrogels are taken by way of structure optimization and composition modification. Third, the environmental adaptability of hydrogel electrolytes is listed in terms of temperature, humidity, and air composition. Fourth, the compatibility of electrolyte–electrode interface is discussed from physical properties of hydrogels. Finally, the prospect for development and application of hydrogels is put forward.     

Enantioselective Diels–Alder reactions with left-handed G-quadruplex DNA-based catalysts

Since the discovery of left-handed G-quadruplex (L-G4) structure formed by natural DNA, there has been a growing interest in its potential functions. This study utilised it to catalyse enantioselective Diels-Alder reactions, considering its different optical rotation compared to an ordinary G4. It was determined that when L-G4 was used with a combination of copper(II) ions, there was a good enantioselectivity (?52% ee) without further addition of ligands. When further consideration was given by adding G4 ligands, G4 was further stabilised, even obtaining a better enantioselectivity (up to ?80% ee). Moreover, when using ligands that have regulatory effects on G4, the ee value can be adjusted. In this work, a minimal left-handed G4 was reported. A follow-up study was also conducted, which recovers that the minimal left-handed G4 remains its catalytic effect and enantioselectivity, but is not so effective as the former case. This indicates that a complete G4 structure is relatively conducive to chiral catalysis.     

Oxygen-vacancy-enhanced Catalytic Activity of Au@Co3O4/CeO2 Yolk-shell Nanocomposite to Electrochemically Detect Hydrogen Peroxide

Biomimetic electrochemical sensors are very promising not only due to their lower expense and longer stability than conventional enzymatic ones, but they also often suffer from simultaneously achieving high sensitivity and good selectivity. Here we present a well-defined Au@Co₃O₄/CeO₂ yolk-shell nanostructure (YSN) that is first synthesized and exploited as highly efficient electrocatalysts for hydrogen peroxide (H₂O₂) detection. The introduced CeO₂ in Co₃O₄ matrix greatly facilitates the migration of lattice oxygen, which increases the concentration of surface oxygen vacancies (O_a), remarkably enhancing the adsorption ability of H₂O₂ and promoting the decomposition of H₂O₂ for faster electron transfer than pristine Au@Co₃O₄ core-shell nanostructure (CSN). The abundant O_a of Au@Co₃O₄/CeO₂ YSN is confirmed by X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR). The as-prepared biomimetic sensor delivers a wide dynamic range (5.0 nM to 5.4 μM), a low limit of detection (LOD) (2.74 nM), and a high sensitivity (35.67 μA μM⁻¹ cm⁻²), paving a new way to construct an ultrasensitive and selective enzyme-free biomimetic electrochemical sensor. Furthermore, the sensor is used to real-time monitor H₂O₂ released from human cervical cancer cells (HeLa) and human umbilical vein endothelial cells (HUVEC), demonstrating its great potential in practical applications.     

Sustainable Route for Synthesizing Aluminosilicate EU-1 Zeolite

Developing sustainable routes for the synthesis of zeolites is still a vital and challenging task in zeolite scientific community. One of the typical examples is sustainable synthesis of aluminosilicate EU-1 zeolite, which is not very efficient and environmental-unfriendly under hydrothermal condition due to the use of a large amount of water as solvent. Herein, we report a sustainable synthesis route for aluminosilicate EU-1 zeolite without the use of solvent for the first time. The physicochemical properties of the obtained EU-1 zeolite are characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetry-differential thermal analysis (TG-DTA), N₂ sorption, inductively coupled plasma (ICP) analysis, and solid nuclear magnetic resonance (NMR), which show the product has high crystallinity, uniform morphology, large BET surface area, and four-coordinated aluminum species. Moreover, the impact of synthesis conditions is investigated in detail. The sustainable synthesis of aluminosilicate EU-1 zeolite under solvent-free