Novel Supports Based on Polysaccharides for Sustained‐Release of Isosorbide Dinitrate

Novel supports based on carboxymethylcellulose (CMC), crosslinked with epichlorohydrin (EPC), and microparticles based on acetylphthalylcellulose (APC), for sustained‐release of isosorbide dinitrate (Isoket, Ik), were obtained. The drug has been included into CMC hydrogels through diffusion from ethanol‐water solution. Studies about the ethanol–water ratio influence on including the drug have shown an increased amount of included drug at higher content of water in the alcohol‐water mixture. Isoket–ACP microparticles have been obtained by drug and polymer co‐precipitation from emulsified aqueous solution.

The kinetics for “in vitro” release of Ik from polymeric materials, in simulated conditions for intestinal tract medium, where the drug is preferentially absorbed, has been analyzed. The experimental data have shown a “zero” order kinetic for drug release, which is characteristic for systems controlled by diffusion.     

Crosslinked Networks Based on Polysaccharides and Collagen for Pilocarpine Sustained Release

The paper presents the experimental studies regarding synthesis and characterization of hydrogels based on gellan (Gel)/chitosan (CS) and collagen (Col), obtained by crosslinking with glutaraldehyde (GLA). The influence of the polysaccharide content and GLA ratio on the final composition and swelling characteristics was evaluated. Hydrogels swelling analysis, in distilled water and phosphate buffer (PBS, pH 7.2) has shown higher swelling degrees at increased concentration of polysaccharide into hydrogels. In vitro release of pilocarpine has demonstrated the possibility to use gellan-collagen and chitosan-collagen hydrogels as ophthalmic drug delivery matrix.     

Modified surface chemistry of activated carbons

In this study, immersion calorimetry was used to characterise different samples of commercial granular activated carbon (GAC) which undergo oxidation with HNO₃ (GACOxN) and thermal treatments to modify its superficial group contents, as well as to determine the textural characteristics of the materials through nitrogen adsorption at 77 K and its superficial chemistry by Boehm titration and zero point of charge. Correlations between the immersion enthalpies and the results of the other techniques of characterisation were established. The immersion enthalpies in dichloromethane obtained were greater, which were found to be between ?88.36 and ?155.6 J g^?1, in contrast to those in carbon tetrachloride, which were found to be between ?50.21 and ?94.29 J g^?1. The dependence of the immersion enthalpies in water on the contents of total acidity and basicity surface groups was also established, and a good correlation between the accessible surface area determined by calorimetric technique and the BET area was found.     

Erratum to: “In vitro biological activity comparison of some hydroxyapatite-based composite materials using simulated body fluid”

The original version of the article was published in Cent. Eur. J. Chem. 11(10) (2013) pp. 1583–1598. Unfortunately, the original version of this article contains a mistake in the affiliation section. The affiliation for R?zvan Stefan is Veterinary Medicine Faculty, University of Agricultural Science and Veterinary Medicine, RO-400372 Cluj Napoca, Romania.     

Activated carbon from bamboo waste modified with iron and its application in the study of the adsorption of arsenite and arsenate

Activated carbon obtained from bamboo waste was synthesised and modified with iron (BAC-Fe) and used for the removal of arsenic from aqueous solutions. Two different adsorption models were used for analysing the data. The adsorption capacities were determined for BAC-arsenite, BAC-Fe-arsenite, BAC-arsenate and BAC-Fe-arsenate, with a qmax (μg g^?1) of 14.89, 19.19, 22.32 and 27.32 respectively. Adsorption capacity varied as a function of pH and modifications to the sorbent. Adsorption isotherms from an aqueous solution of arsenite and arsenates on activated carbons were determined. These adsorption isotherms were consistent with the Langmuir and Freundlich adsorption models. Adsorption kinetics followed a pseudo-first order rate equation, as did the kinetics for BAC-Fe-arsenite and BAC-Fe-arsenate adsorption.      

A Convenient Synthesis of Unsymmetrical N,N′-Disubstitutedα,ω-Diaminoalkanes

A general procedure is described for regiospecific construction of unsymmetrical N-alkyl (or aralkyl)-N′-aryl-α,ω-diaminoalkanes 3 (n=2,3,4) by reduction of N-(ω -arylaminoalkyl)amides 2 with borane. Compounds 2 are readily obtained by condensation of N-(ω-haloalkyl)amides 1 with aromatic amines.     

Selective Sulfenylative Desulfonylation or Decarbalkoxylation of α-Sulfonyl Malonates with DABCO or Bu3N: Reactivity and Conformational Analysis

The study on reactivity of several α-substituted α-sulfonyl malonates toward 1,4-diazabicyclo[2.2.2]octane (DABCO) and Bu₃N is described. The reactivity with DABCO revealed the possible competition between decarbalkoxylation and unexpected desulfonylation, depending on the α-substituent, because of sterical hindrance around the electrophilic centers (SO₂ and CO₂R). The derivatives with crowded α-substituents suffer selective desulfonylation, and a novel and efficient desulfonylation method can be proposed. The dependence of the reactivity of α-sulfonyl malonates on the sterical hindrance around the electrophilic centers is confirmed by conformational analysis (Macromodel/MM2? and Mopac/MP3). The carbanionic mechanism is proved because the corresponding protonated, deuterated, and sulfenylated products were obtained by addition of the corresponding electrophilic agents. Bu₃N showed itself to be a novel selective decarbalkoxylation agent for any α-substituted α-sulfonyl malonate.     

The role of nanocellulose fibers, starch and chitosan on multipolysaccharide based films

Thin nanocomposite films of thermoplastic starch, chitosan and cellulose nanofibers (bacterial cellulose or nanofibrillated cellulose) were prepared for the first time by solvent casting of water based suspensions of the three polysaccharides. The role of the different bioploymers on the final properties (thermal stability, transparency, mechanical performance and antimicrobial activity) of the films was related with their intrinsic features, contents and synergic effects resulting from the establishment of interactions between them. Thermoplastic starch displays an important role on the thermal stability of the films because it is the most stable polysaccharide; however it has a negative impact on the mechanical performance and transparency of the films. The addition of chitosan improves considerably the transparency (up to 50 % transmittance for 50 % of chitosan, in respect to the amount of starch), mechanical performance and antimicrobial properties (at least 25 % of chitosan and no more than 10 % of cellulose nanofibers are required to observe bacteriostatic or bactericidal activity) but decrease their thermal stability. The incorporation of cellulose nanofibers had the strongest positive impact on the mechanical properties of the materials (increments of up to 15 and 30 MPa on the Young′s modulus and Tensile strength, respectively, for films with 20 % of BC or NFC). Nonetheless, the impact in thermal stability and mechanical performance of the films, promoted by the addition of chitosan and cellulose nanofibres, respectively, was higher than the expected considering their percentage contents certainly because of the establishment of strong and complex interactions between the three polysaccharides.     

Antioxidant capacity and antibacterial activity from Annona cherimola phytochemicals by ultrasound-assisted extraction and its comparison to conventional methods

In recent years, the food, pharmacy, and cosmetic industries have focused on the search of natural compounds with antimicrobial and antioxidant properties; commonly, these compounds are obtained from Kingdom plantae. The aim of the present work is comparing antibacterial and antioxidant capacity of Annona cherimola Mill leaves, using different extraction methods. The ultrasound assisted extraction technique (UAE) was compared with conventional techniques: Soxhlet and maceration. Water and ethanol were used as solvents for leaves extractions performed with these three methods. The main acetogenins reported in Annona cherimola Mill and Annona muricata L. species were simulated using the functional hybrid B3LYP and to confirm its presence, analysis of the compound composition was performed using FT-IR, UV–Vis and HPLC. Total phenolics (TP) and flavonoids (TF) were determined by spectroscopy techniques and novel Differential Pulse Voltammetry (DPV) electrochemical technique. Total Antioxidant Capacity (TAC) of the extracts was measured, using the DPPH, FRAP and CUPRAC techniques. The highest antioxidant content was found in the Soxhlet water extracts; even so, the UAE technique presented an attractive alternative due to considerable reduction in extraction time, which was greater than 99%, and possible selectivity in compounds extraction. Finally, antibacterial activity of the extracts was evaluated, obtaining the best results against gram-positive bacteria using UAE water extract. In this way, the UAE technique presents an excellent extraction option due to the considerable reduction in time and energy, as well as the increase in antibacterial activity.     

The B-factor index for the binding site (BFIbs) to prioritize crystal protein structures for docking

Structural Chemistry - In cheminformatics, protein-ligand docking is a powerful tool applied for virtual screening, pose prediction, and binding affinity estimation. However, docking results depend...