三效吸收式制冷循环系统性能分析

对12个通用的三效循环系统以及这12个通用循环系统组成的76种可能的密闭循环系统进行了评测。根据通用三效循环系统的压力和溶解度要求,对通用三效循环系统进行了分析,并充分考虑各部件设计中的问题和COPs数值,以及处于高腐蚀环境中部件的数目。通过分析,确定了四个性价比较优的系统:Alkitrate Topping循环系统,Pressure Staged Envelope循环系统,High Overlap循环系统和Dual Loop循环系统。     

ICP-MS法测定不同采收时间宽叶荨麻中微量元素含量

采用微波消解,ICP-MS法分析不同采收时间宽叶荨麻中18种微量元素Al,Ba,Ca,Co,Cr,Cu,Fe,K,Li,Mg,Mn,Mo,Na,Ni,P,Pb,S和Zn的含量。该方法的相对标准偏差在1.2%～5.3%之间,加标回收率在95.4%～101.2%之间。结果表明宽叶荨麻中K,P,S,Ca,Na含量较高;Fe,Mg,Mn,Zn含量次之;有潜在生理毒性的元素Al,Cr,Pb的含量较低,并且在宽叶荨麻中微量元素呈现明显的季节性动态变化,此结果为进一步研究宽叶荨麻药理药效与微量元素的关系以及更好的开发这一资源提供理论数据。     

Thermally switchable and discretely tunable comb filter with a linearly chirped fiber Bragg grating

We propose and experimentally demonstrate a novel switchable and discretely tunable comb filter based on a thermally induced linearly chirped fiber Bragg grating. Experimentally we achieved a thermally induced optical bandpass filter that has eight switchable passband peaks with peak separations of 1.6 and 3.2 nm, a very narrow bandwidth (as small as 10 pm) of each peak, a tunable range of 16.5 nm, and a greater than 25 dB rejection ratio. Two spectral peaks separated by only 0.8 nm were also obtained with this comb filter. This filter provides the unique advantages of an all-fiber structure, switchable spectral peaks, independent tuning of the center wavelength and wavelength spacing of the spectral peaks, low polarization sensitivity, simple structure, ease of fabrication, and low cost.     

N = 4 Supersymmetric Morse Oscillator and Its Spectrum-Generating Algebra

In this paper N = 4 supersymmetry of generalized Morse oscillators in one dimension is studied. Both bound states and scattering states of its four superpartner Hamiltonians are analyzed by using unitary irreducible representations of the noncompact Lie algebra su(1,1). The spectrum-generating algebra governing the Hamiltonian of the N = 4 supersymmetric Morse oscillator is shown to be connected with the realization of Lie superalgebra osp(1,2)or B(0,1) in terms of the variables of a supersymmetric two-dimensional harmonic oscillator.     

Spectral emissivity of type E235B low carbon structural steel with different roughnesses

A self-built experimental apparatus was employed to study the spectral emissivity of type E235B low carbon structural steel in the wavelength range 2–15 μm at different temperatures by energy comparison method. The surface roughness and topography of the steel E235B were determined by a roughness tester and a scanning electron microscopy, respectively. And then, the spectral emissivity of steel E235B with six different roughnesses was measured before and after oxidation. The measurement results showed that the spectral emissivity increased with the increasing temperature and surface roughness before oxidation. The effect of roughness on the spectral emissivity is different at different wavelength and temperature ranges. However, the oscillatory behavior of the spectral emissivity was observed after oxidation. To explore the possible reasons for emissivity variation, the changes of surface roughness and optical roughness were investigated after oxidation. It is found that both the surface roughness and optical roughness increased after oxidation. Although the optical roughness can be used as one of the parameters to evaluate the effect of surface roughness on the spectral emissivity, it is insufficient to describe the effect of surface morphology on the spectral emissivity.     

Up-conversion emissions of Er<Superscript>3+</Superscript>-Yb<Superscript>3+</Superscript> codoped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles by the arc discharge synthesis method

The Er³⁺-Yb³⁺ codoped Al₂O₃ nanoparticles with an average particle size of about 50 nm have been synthesized by an arc discharge synthesis method. The green and red up-conversion emissions centered at about 526, 547 and 677 nm, corresponding respectively to the ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978-nm semiconductor laser diode excitation. The Annealing has evident effect on the up-conversion emissions of the samples: The red up-conversion emission is noticeable before annealing; however, the green up-conversion emission becomes predominant after annealing. The mixture of (Er,Yb)₃Al₅O₁₂ and α-(Al,Er,Yb)₂O₃ phases is more favorable for green up-conversion emissions due to an enhancement of the ESA (I) of ⁴I_11/2+a photon→⁴F_7/2 and ET (III) of ²F_5/2(Yb³⁺)+⁴I_11/2(Er³⁺)→²F_7/2(Yb³⁺)+⁴F_7/2(Er³⁺) processes. The two-photon absorption up-conversion process is involved in the green and red up-conversion emissions. The results have proved that arc discharge synthesis is a new promising preparation technology for optical materials. Supported by National Natural Science Foundation of China (Grant No. 10804015), the Scientific Research Foundation for Doctor of Liaoning Province (Grant No. 20071095), and the Educational Committee Foundation of Liaoning Province (Grant No. 2008123)     

Mechanical stability and thermodynamic properties of OsC from first-principles calculations

The elastic and thermodynamic characteristics of OsC crystal have been predicted through a method of density functional theory within the generalized gradient approximation (GGA). Compared with WC-type OsC, NaCl-type OsC is not only energy unfavorable but also mechanics unstable. The five independent elastic constants (C_ij), bulk modulus (B₀), the dependence of bulk modulus on temperature and pressure as well as the thermal expansion coefficient (α_V) at various temperatures for WC-type OsC are discussed. According to our calculations, WC-type OsC should be an ultra-incompressible material with high bulk modulus about 381 GPa. In addition, the bulk modulus will increase with increasing pressure while decrease with increasing temperature. The researches on the thermal expansion coefficient indicate that there will be a knee point during the process of thermal expansion coefficient variation versus increasing temperature. Our results may provide useful information for theoretical and experimental investigation of OsC.     

Electro-acupuncture promotes survival, differentiation of the bone marrow mesenchymal stem cells as well as functional recovery in the spinal cord-transected rats

Background  

Bone marrow mesenchymal stem cells (MSCs) are one of the potential tools for treatment of the spinal cord injury; however, the survival and differentiation of MSCs in an injured spinal cord still need to be improved. In the present study, we investigated whether Governor Vessel electro-acupuncture (EA) could efficiently promote bone marrow mesenchymal stem cells (MSCs) survival and differentiation, axonal regeneration and finally, functional recovery in the transected spinal cord.     

A new graphical coding of DNA sequence and its similarity calculation

The DNA primary sequence is translated into “structure graph” based on classification of its four bases. Then the invariants, such as topological indices, are extracted from those graphic representations of DNA primary sequences, and used to calculate the similarities among the eleven species. From these similarities/dissimilarities the homologies can be revealed that they are in agreement with evolutionary relation satisfactorily.