Low-temperature heat capacity and standard thermodynamic functions of 1-butyl-3-methylimidazolium lactate

The heat capacities of 1-butyl-3-methylimidazolium lactate ionic liquids ([C₄mim][Lact]) were measured with a highly accurate automatic adiabatic calorimeter over the temperature range from 79 to 406 K. And the experimental values of molar heat capacities were fitted to a polynomial equation using least square method in the appropriate temperature ranges. The standard molar heat capacity was determined to be 1734.46?±?5.12 J K^?1 mol^?1 at 298.15 K. The molar enthalpy and molar entropy of the transition were determined to be 15.575?±?0.045 and 64.44?±?0.14 J K^?1 mol^?1. Other thermodynamic properties, such as (H_T???H_298.15) and (S_T???S_298.15), were also calculated. Furthermore, when the temperature reaches 241.87 K, the strongest peaks appeared by analysis of the heat capacity curve. This phenomenon could be explained from the interionic interaction, which is the hydrogen bond between the anions and cations.     

不同温度热处理后砂岩三点弯曲的断裂特性

通过三点弯曲试验研究了不同温度影响下小尺度砂岩试件的断裂特性,证实温度的影响是明显的.125℃是个临界温度点,此时不仅砂岩的平均断裂韧性达到最大值,而且这时砂岩的裂纹扩展模式也发生了根本性的变化,即低温(低于125℃)热处理后砂岩的断裂以沿颗粒断裂机制为主;而高温(大于125℃)热处理后的砂岩的断裂以破断颗粒和沿颗粒的混合断裂机制为主.在100℃-150℃的温度范围内,砂岩的力学特性变得不稳定,这可能是由于粘土物质内部部分吸附水及层间水的蒸发使得粘土物质孔隙结构发生了变化及力学行为变得不稳定所造成的.从125℃到600℃,砂岩的断裂韧性整体有下降趋势,有约50%的降幅,这不仅与温度影响了粘土物质与矿物的胶结情况有关,也与高温处理后砂岩表面出现的热开裂有关,还与因矿物颗粒及粘土物质的热学性质差异导致冷却后存在的残余应力相关.     

基于二维光栅分光的同步移相干涉测量技术

为了干涉测量的抗振目的,提出了一种新的同步移相干涉测量方案并搭建了实验装置。整个测量系统在迈克耳孙偏振移相干涉仪的基础上,利用一个正交的二维光栅产生对称分光,选取对于理想光栅衍射效率一致的(±1,±1)级衍射光作为测量分光路,使之分别通过偏振方向依次相差45°的一个偏振片组,从而分别形成0°、90°、180°和270°相移的四幅移相干涉图,按照传统的四步移相算法,对被测波面进行了复原。分析了光强畸变和移相误差对系统的测量误差的影响。利用该系统测量一球面系统,结果与在ZYGO干涉仪上相比较,球面系统的均方根误差相差0.012λ,峰谷值相差0.051λ。     

Evolution of concentration fluctuation during phase separation of polystyrene/poly(vinyl methyl ether) blend in the presence of nanosilica

The influence of nanosilica on the concentration fluctuation of polystyrene/poly (vinyl methyl ether) (PS/PVME) mixtures was investigated during phase separation. The amplitude of concentration fluctuation was quantified by dielectric spectrums based on the idea of Lodge–Mcleish model and the linearized Cahn–Hilliard theory could describe the amplitude evolution of concentration fluctuation at the early stage of phase separation. Hydrophilic nanosilica A200 dispersed in PVME‐rich phase behaved an obvious inhibition effect on the concentration fluctuation of blend matrix, while hydrophobic nanosilica R974 dispersed in PS‐rich phase had little effect on the concentration fluctuation. The kinetics and amplitude evolution of concentration fluctuation during phase separation for PS/PVME/A200 nanocomposites were remarkably restrained due to the surface adsorption of PVME on A200. As the segmental dynamics of PVME and PS in homogeneous matrix was hardly influenced by A200 and R974, the enhanced miscibility and the significantly constrained flow relaxation of PVME chains might contribute to the retarded concentration fluctuation of PS/PVME/A200 nanocomposites. While the weak interaction between R974 and components of blend matrix and little effect of R974 on the molecular dynamics of PS chains may result in the weak retardation of concentration fluctuation for blend matrix. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1337–1349     

On almost sure max-limit theorems of complete and incomplete samples from stationary sequences

Let M _n denote the partial maximum of a strictly stationary sequence (X _n ). Suppose that some of the random variables of (X _n ) can be observed and let [(M)\tilde]_n\tilde M_n stand for the maximum of observed random variables from the set {X ₁, ..., X _n }. In this paper, the almost sure limit theorems related to random vector ([(M)\tilde]_n\tilde M_n , M _n ) are considered in terms of i.i.d. case. The related results are also extended to weakly dependent stationary Gaussian sequence as its covariance function satisfies some regular conditions.     

Michael Addition Catalyzed by Chiral Secondary Amine Phosphoramide Using Fluorinated Silyl Enol Ethers: Formation of Quaternary Carbon Stereocenters

A chiral secondary amine phosphoramide was developed and identified as a powerful catalyst for the Mukaiyama–Michael addition of fluorinated enol silyl ethers to tetrasubstituted olefins. The resulting products are obtained with high enantioselectivities and contain a quaternary carbon stereocenter bearing either a difluoroalkyl or monofluoroalkyl group.     

Investigation of magnetic properties for oblique deposited granular films by magnetic field annealing

A series of (Fe₅₇Co₂₄Ni₄Nb₂B₁₃)_x-(SiO₂)_1−x nano-granular thin films were fabricated by magnetron sputtering with different oblique incidence angle θ and excellent soft magnetic properties are achieved. Based on the results of magnetic field anneal at different temperature T_a, it is evidenced that orientation of atomic pairs contributes to the annealing treatment, and could manipulate magnetic anisotropy. The damping coefficient α decreases with increasing angle θ and this is ascribed to the anisotropy dissipation.     

Optimal replacement policy for a multistate repairable system

In this paper, a deteriorating simple repairable system with k + 1 states, including k failure states and one working state, is studied. The system after repair is not ‘as good as new’ and the deterioration of the system is stochastic. Under these assumptions, we study a replacement policy, called policy N, based on the failure number of the system. The objective is to maximize the long-run expected profit per unit time. The explicit expression of the long-run expected profit per unit time is derived and the corresponding optimal solution may be determined analytically or numerically. Furthermore, we prove that the model for the multistate system in this paper forms a general monotone process model which includes the geometric process repair model as a special case. A numerical example is given to illustrate the theoretical results.