Terfenol-D/PZT磁电复合材料的磁电相位移动研究

采用粘合法制备了叠层结构的块体Terfenol-D/PZT磁电复合材料,测量了不同频率下的磁电回线,采用新的极坐标下的方式做图.从极坐标下的磁电回线中可以看出,随直流磁场的变化,非谐振频率下的磁电相位发生了轻微移动,移动幅度随频率的增加而增加;而在谐振频率下,伴随着巨磁电效应,磁电相位发生了显著移动,移动幅度达到了近90°.与粉末Terfenol-D/环氧树脂/PZT磁电复合材料对比之后表明,非谐振频率下块体Terfenol-D/PZT的磁电相位移动主要由涡流引起;而谐振频率下大幅度相位移动则主要来源于Terfenol-D的磁致弹性变化.     

面向微穿孔板吸声结构和吸声特性混合设计的软件平台

微穿孔板吸声结构是由微穿孔板与板后空腔组成的共振吸声结构,被认为是继多孔吸声材料之后发展起来的最有吸引力的吸声结构,其吸声特性与结构参数孔径d、板厚t、孔距b及空腔深度D有关,如何按需设计一个有效的微穿孔板吸声结构已成为目前研究的热点。本文从微穿孔板吸声结构和吸声特性混合设计的角度出发,使用面向对象的编程语言C++开发了微穿孔板吸声结构设计平台。与以往设计方法不同,本文开发的软件平台综合考虑了结构参数和吸声特性参数两方面的限制,根据实际应用要求平衡微穿孔板吸声结构的最大吸声系数与吸声带宽之间的制约关系,并以饱满的吸声曲线为目标,提供满足混合设计要求的优化结构参数。     

等离子体电极普克尔盒电光开关单脉冲过程数值模拟

采用流体模型对等离子体电极普克尔盒(PEPC)电光开关单脉冲过程进行了数值模拟分析.模型包括带电粒子连续性方程、动量守恒方程、电子平均能量方程及空间电位泊松方程.分别采用隐式指数差分格式，超松弛迭代法(SOR)和经典四阶龙格-库塔法(R-K)对带电粒子连续性方程，泊松方程和电子平均能量方程进行数值求解.模拟分析了PEPC单脉冲过程中的带电粒子浓度、电子温度、空间电场、PEPC的放电电流、晶体两侧电压和开关效率的时间演化特性.模型得出了PEPC中气体放电等离子体的微观物理过程与PEPC宏观参量的关系，对设计 关键词： 等离子体电极普克尔盒 电光开关 数值模拟 气体放电     

对光电效应实验装置的剖析

光电效应是物理学中一个重要课问题，也是近代物理学几个重大的实验之一．一般物理学教材均要介绍光电效应．但是，在众多的教材中，对光电效应实验装置图的引入存在差异，有些有失科学性，因而引起广大物理学教育工作者的关注．     

Automatic Search Dense Connection Module for Super-Resolution

The development of display technology has continuously increased the requirements for image resolution. However, the imaging systems of many cameras are limited by their physical conditions, and the image resolution is often restrictive. Recently, several models based on deep convolutional neural network (CNN) have gained significant performance for image super-resolution (SR), while extensive memory consumption and computation overhead hinder practical applications. For this purpose, we present a lightweight network that automatically searches dense connection (ASDCN) for image super-resolution (SR), which effectively reduces redundancy in dense connection and focuses on more valuable features. We employ neural architecture search (NAS) to model the searching of dense connections. Qualitative and quantitative experiments on five public datasets show that our derived model achieves superior performance over the state-of-the-art models.     

Simultaneously Enhancing Mechanical Properties and Melt Flow Ability of Polyamide 6 by Blending with a Hyperbranched Polymer

A series of polyamide 6/hyperbranched polymers (PA6/HBP) blends with different HBP contents was prepared by melt processing using a twin-screw extruder. The HBP was synthesized on the basis of pentaerythritol and dimethyl terephthalate according to a one-step method. The melt flow behavior, crystallization behavior, morphology, and mechanical properties of the PA6/HBP blends were investigated. The results showed that the melt flow index of the blends was greatly improved by a small amount of HBP. The yield strength, tensile modulus, Izod impact strength, and flexural strength of samples were simultaneously enhanced from 54.6 MPa, 0.5 GPa, 3.8 kJ/m², 56.9 MPa for pure PA6 to 61.1 MPa, 0.7 GPa, 5.3 kJ/m², 67.1 MPa for PA6 blends with 2.0 wt% HBP, respectively. The PA6/HBP blends showed the higher content of α-form crystal and a higher degree of crystallinity than those of pure PA6.     

Optical Trapping with Focused Surface Waves

Near-field optical trapping can be realized with focused evanescent waves that are excited at the water–glass interface due to the total internal reflection, or with focused plasmonic waves excited on the water–gold interface. Herein, the performance of these two kinds of near-field optical trapping techniques is compared using the same optical microscope configuration. Experimental results show that only a single-micron polystyrene bead can be trapped by the focused evanescent waves, whereas many beads are simultaneously attracted to the center of the excited region by focused plasmonic waves. This difference in trapping behavior is analyzed from the electric field intensity distributions of these two kinds of focused surface waves and the difference in trapping behavior is attributed to photothermal effects due to the light absorption by the gold film.     

关于Rabinowitz-Crandall的一个例子

本文论述常用燃烧室的柴油机燃用纯酒精的技术可行性。以L195型柴油机采用高压喷射、火花助燃进行燃用纯酒精试验为依据,分析其主要性能和指标。从理论上探讨混合气形成、着火、功率、热效率和使用性能的特点与影响因素。     

DETERMINING DIRECTION OF SECOND ORDER STRUCTURAL PHASE TRANSITION AT POINT FOR ALL 230 SPACE GROUPS

Using our new developed GRAPE system^[1], we calculated the group theoretical criteria in the Landau theory of the second order phase transi- tions. The possible directions of the second order structural phase transitions at r point for all 230 space groups were tabulated. Some errors in several existing tables and published results are discovered and corrected.     

非晶态Fe40Ni38Mo4B18（2826MB）合金粉末的高压压结与磁性研究

 本文研究了非晶态软磁材料Fe₄₀Ni₃₈Mo₄B₁₈（2826MB）合金粉末在高压下加温压结成三维大尺寸产品的可行性，并通过压结样品的复数导磁率在弱交变磁场中的行为，探讨了压结条件对压结样品的软磁性能的影响。结果表明，在本实验所采用的压力范围内，压结温度对压结样品的性能的影响大于压结压力的影响。