Nitroxide‐mediated radical polymerization of 2‐(dimethylamino)ethyl acrylate and its sequential block copolymerization with styrene and N‐butyl acrylate

Nitroxide‐mediated radical polymerization (NMRP) of 2‐(dimethylamino)ethyl acrylate (DMAEA) was carried out at 100–120 °C, initiated by MONAMS, an alkoxyamine based on N‐tert‐butyl‐N‐(1‐diethyl phosphono‐2,2‐dimethylpropyl)nitroxide, SG1. Controlled polymerization can be achieved by the addition of free SG1 (the initial molar ratio of SG1 to MONAMS ranged from 0.06 to 0.12), giving a linear first‐order kinetic plot up to 55–70% conversion depending on the reaction conditions. The molecular weights show a near linear increase with conversion; however, they deviate to some extent with theoretical values. SG1‐mediated polymerization of DMAEA at 112 °C is also controlled in organic solvents (N,N‐dimethylformide, anisole, xylene). Polymerization rate increases with increasing solvent polarity. Chain transfer to polymer produces ～1 mol % branches in bulk and 1.2–1.9 mol % in organic solvents, typical of those for acrylates. From poly(styrene) (pS) and poly(n‐butyl acrylate) (pBA) macroinitiators, amphiphilic di‐ and triblock copolymers p(S‐b‐DMAEA), p(DMAEA‐b‐S‐b‐DMAEA), p(BA‐b‐DMAEA), and p(DMAEA‐b‐BA‐b‐DMAEA) were synthesized via NMRP at 110 °C. Polymers were characterized by GPC, NMR, surface tension measurements, and DSC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 414–426, 2006     

1．5GHz锯材超导腔的研制

介绍铌材超导腔的研制进展，重点讨论了国产铌腔的材料改性，以及相应的超导腔性能的改进．叙述了１．５ＧＨｚ铌腔的腔形设计，分析了铌材的射频性能和机械性能，制定了铌腔制作与后处理的特定工艺．最后给出了１．５ＧＨｚ铌材超导腔的低温实验结果．     

苯基重氮盐-冠醚分子嵌合物的FAB-MS及其准分子离子生成机理的研究

Fast atom bombardment mass spectra of a series of arenediazonium salts with various substituents complexed with 18-crown-6 and dibenzo-24-crown-8 ethers were examined. The correlation between quasi-molecular ion abundance of various complexes and the properties, coordination ability of donor-acceptor linkages in the complexes were studied. By using molecular orbital calculation we have successfully demonstrated that the correlation cited is related to the electron cloud densities on the heteroatoms α-N and β-N of arenediazonium salts.     

掺铒a-SixC1-x-H薄膜的发光特性

用等离子体增强化学气相沉积（PECVD）的方法，以固定的氢气（H2）流量和不同的硅烷（SiH4）和甲烷（CH4）流量比沉积了一系列的氢化非晶SiC（a-Si，C1-x-H）膜。用这种宽带隙的a-SixC1-x-H材料作为掺铒的基体材料，通过离子注入的方法得到掺铒的a-SixC1-x-H（a-SixC1-x-H：Er）膜。注入以后的样品经过不同温度的退火。用X射线光电子能谱（XPS）、红外吸收光谱（IR）、拉曼散射谱（Raman）等技术研究不同的SiH4／CH4流量比和退火温度对a-SixC1-x-H：Er发光强度的影响。结果表明，高温退火引起了膜中C的分凝，对饵的发光是不利的。通过低温和室温下铒发光强度的比较，表明这种材料具有较弱的温度猝灭效应。     

钇对Ti-1100高温钛合金热稳定性和蠕变行为的影响

量了Ｔｉ１１００和Ｔｉ１１００／０１％Ｙ（质量分数）高温钛合金在６００℃／１００ｈ空气中暴露后的拉伸性能及在６００℃／１５０ＭＰａ／１００ｈ条件下的蠕变性能，利用透射电镜观察了合金室温及蠕变后的组织。结果表明，Ｔｉ１１００合金加入０１％的Ｙ后，由于原始β晶粒得到细化，明显改善了其热稳定性；固溶在基体中的硅原子阻碍位错滑移和攀移，使蠕变中的回复过程难于实现；稀土还抑制α２相的长大，所形成的氧化物也阻碍位错的运动。这些均有利于提高Ｔｉ１１００合金的抗蠕变性能。     

环氧丙烯酸酯的紫外光固化

制备了适于配制紫外光固化涂料的环氧丙烯酸酯，研究了反应温度、阻聚剂、催化剂等因素对环氧树脂与丙烯酸反应的影响；讨论了反应机理和动力学；并利用红外光谱观察了产物的紫外光固化行为。季铵盐能有效地催化环氧树脂和丙烯酸的反应，当其用量为０．６％～１．２％时，在９０～１１０℃反应４．５～８小时后，环氧基转化率大于９７％。由此配制的光固化涂料经紫外光辐照能快速固化。     

Solid state synthesis of copper(I) thiotungstate cluster compounds at low heating temperatures. Crystal structures of [(n-Bu)4N]3-[WS4Cu3Cl3Br] and [Et4N]4[WS4Cu4I6]

Summary Reaction of [NH₄]₂[WS₄] with CuX (X = Cl or I) and R₄NX (R = Et or n-Bu) in the solid state gave two new bimetallic compounds with W:Cu compositions from 1:3 to 1:4. Compound (1), [(n-Bu)₄N]₃[WS₄Cu₃Cl₃Br], crystallizes in the hexagonal space group R3c with a = 17.051(5), c = 38.372(5) Å, V = 9661.8 ų, Z = 6. The cluster anion of (1) comprises a cubane-like cluster core [WS₃Cu₃Br] of C₃ symmetry with a Cl atom attached to each of the three Cu atoms and one terminal sulphido ligand attached to the W atom. Compound (2), [Et₄N]₄[WS₄Cu₄I₆], crystallizes in the monoclinic space group C2/m with a = 29.702(6), b = 12.7887(5), c = 15.327(3)Å, = 99.69(2), V = 5738.1 ų, Z = 4. In the cluster anion of (2), four edges of the WS₄ core are coordinated by four Cu atoms, giving a WS₄Cu₄ aggregate of approximate C_2V symmetry.     

2-(苯并噻唑-2-基)-5-(N,N-二乙基氨基)苯酚衍生物的合成及其对H2S的识别

以4-N,N-二乙基氨基水杨醛为原料,制备了2-(苯并噻唑-2-基)-5-(N,N-二乙基氨基)苯酚衍生物(探针L),并对其结构进行了表征。在DMSO/PBS(体积比3∶7,pH=7.4)溶液中,探针L具有高选择性并可荧光"关-开"识别H_2S,在365nm紫外灯照射下,由无荧光变成蓝色荧光。实验表明,探针L识别H_2S的检测限为2.05×10~(-6)mol/L,pH适用范围为6～9,可用于检测实际水样中的H_2S。     

An efficient method for constructing nonorthogonal localized molecular orbitals

A new method for constructing nonorthogonal localized molecular orbitals (NOLMOs) is presented. The set of highly localized NOLMOs is obtained by minimization of the spread functional starting from an initial set of canonical orthogonal molecular orbitals. To enhance the stability and efficiency, the centroids of the NOLMOs are constrained to be those of the corresponding orthogonal localized molecular orbitals (OLMOs), which are obtained with the Boys criterion in advance. In particular, these centroid constraints make the optimization for each NOLMO independent of the others, which is an attractive feature for application to large systems. The minimization with the constraints incorporated through the multiplier-penalty function method is stable and efficient in convergence. While exhibiting the classical bonding pattern in chemistry and sharing a spatial distribution similar to that of the corresponding OLMOs, the obtained NOLMOs are more compact than the corresponding OLMOs with about 10%-28% reduction in the value of the spread functional and devoid of the troublesome "orthogonalization tails."     

Effect of multi-walled carbon nanotubes on non-isothermal crystallization kinetics of polyamide 6

The non-isothermal crystallization behaviors of multi-walled carbon nanotubes (MWNTs)/polyamide 6 (PA6) composites were investigated by differential scanning calorimetry (DSC). Three methods, namely, Avrami, Ozawa and Mo, were carried out to analyze the non-isothermal crystallization data. The results showed that the MWNTs in PA6 acted as effective nucleation agents. However the crystallization rate of composites obtained was lower than that of the neat PA6. It is indicated that the presence of MWNTs influenced the mechanism of nucleation and the growth of PA6 crystallites.