酯化交联聚乙烯醇膜用于渗透气化法分离EtoH／H2O的研究

合成了一系列磷酸和二元羧酸酯化交联改性的聚乙烯醇(PVA)膜,研究了它们用于水-乙醇混合液的渗透气化分离规律。磷酸改性的PVA膜具有较大的通量,当料液浓度为50%时,通量可达1200g/m~2·hr.,分离系数α_(H_2O/EtOH)=10。丙二酸改性PVA膜在料液浓度为50%时,通量可达800g/m~2·hr.,且α_(H_2O/EtOH)=18。并作了这两种膜的通量和分离系数随料液浓度的变化曲线。草酸交联的PVA膜具有较高的分离系数,但通量很小。求出了水、乙醇及总的表现渗透活化能。     

Study of the Complexation Behavior of Calixarene with Transition Metal Cations by UV—vis and Fluorescent Spectra

A new fluorescent compound based on calix[4] arene skeleton was synthesized.Its complexation ability with transition metal ions,such as Fe^3 ,Co^2 ,Ni^2 ,Cu^2 ,Zn^2 and Ag^ ,Was investigated by UV-vis and fluorescent spectra.     

1β—Methyl Carbapenem中间体的合成

综述了１β－Ｍｅｔｈｙｌ Ｃａｒｂａｐｅｎｅｍ中间体的合成方法，重点强调了如何构筑１位β构型的甲基。参考文献３７篇。     

Macroporous poly(methyl methacrylate) produced by phase separation during polymerisation in solution

Polymethyl methacrylate (PMMA) sponges were obtained by polymerization in a solution with monomer/ethanol ratios up to 20:80. The material obtained after the elimination of the solvent present a homogeneous distribution of dispersed pores up to a monomer/ethanol ratio lower than 40:60. For higher ethanol contents in the reacting mixture, the morphology of the sponge corresponds to a network of PMMA microparticles, leaving large empty spaces leading to highly porous structure. The monomer/ethanol ratio during polymerization has a large influence on the porosity, thermal, and mechanical properties of the material and, for large solvent contents, on the size of the polymer microparticles.     

锌试剂分光光度法测定壳聚糖含量

利用锌试剂与壳聚糖在一定酸度条件下的特异性显色反应，即其复合物在465nm处吸光度与壳聚糖含量在0～O．04g／L范围内呈现良好的线性关系(R=0．996)，基于此建立了一种简便快速的分光光度法。平均回收率为99．68％。     

极谱杂多酸吸附波测定合金中硅

在pH2—4的盐酸介质中,硅(Ⅳ)、锑(Ⅲ)与铝(Ⅵ)形成三元杂多酸,此三元杂多酸在0.4mol/L的HCl中能迅速在滴汞电极上还原而产生灵敏的极谱电流。其峰电位为-0.30V(vs.SCE)。测定下限是8×10~(-8)mol/L。     

杯芳烃的配位化学──Ⅳ.对叔丁基杯[8]芳烃与钙、镉配合物的合成与表征

本文合成了对叔丁基杯[8]芳烃(H₈L)与钙、镉的固体配合物。并以元素分析、核磁共振、热谱、红外谱、紫外谱等进行表征。其配合物的组成分别为Ca(H₆L)·6dmf及Cd(H₆L)·6dmf.     

Hypervalent Iodine(III) Sulfonate Mediated Synthesis of Imidazo[1,2‐a]pyridines

A direct and efficient method for the conversion of alkyl aryl ketones to imidazo[1,2‐α]pyridines has been developed based on initial formation of α‐organosulfonyloxy ketones and their subsequent cyclocondensation by 2‐aminopyridines in one‐pot conditions.     

Rh complexes of 1-(2,4,6-triisopropylphenyl-)3-methyl-1H-phosphole: preparation and use as catalysts in the hydroformylation of styrene

In the series of 1-(2,4,6-trialkylphenyl-)3-methyl-1H-phospholes (1a–c) that are to a certain extent of aromaticity, only the isopropyl substituted one (1a) entered into reaction with dimeric (pentamethylcyclopentadienyl)rhodium dichloride to afford Rh(III) complex (2a) in a reversible manner. After a careful workup, (2a) could be prepared and characterized whose stereostructure was elucidated by B3LYP/3–21G*, B3LYP/6–31G* and LANL2DZ calculations. Complex (2a) as a preformed catalyst, as well as the Rh(acac)(CO)₂ + 2(1a) in situ catalytic system were useful in the hydroformylation of styrene and gave the branched aldehyde in regioselectivities of 65–96%.