Simultaneous serum desalting and total protein determination by macroporous reversed-phase chromatography

Macroporous reversed-phase (mRP) chromatography was successfully used to develop an accurate and precise method for total protein in serum. The limits of detection (0.83 μg, LOD) and quantification (2.51 μg, LOQ) for the mRP method are comparable with those of the widely used micro BCA protein assay. The mRP method can be used to determine the total protein concentration across a wide dynamic range by detecting chromatographic peaks at 215 nm and 280 nm. The method has the added advantage of desalting and denaturing proteins, leading to more complete digestion by trypsin and to better LC–MS–MS identification in shotgun proteomics experiments.

Quality assurance in immunoassay performance—comparison of different enzyme immunoassays for the determination of caffeine in consumer products

Enzyme immunoassays with optical detection are amongst the most widely used bioanalytical tools. We defined seven parameters for the quality assessment of immunoassays that were addressed in a systematic study of direct and indirect immunoassays, using the enzymes horseradish peroxidase (HRP) and alkaline phosphatase (AP), the chromogenic substrates 3,3′,5,5′-tetramethylbenzidine (TMB) and para-nitrophenyl phosphate, and the fluorescent substrates 3-(4-hydroxyphenyl)propionic acid and 4-methylumbelliferyl phosphate. The same monoclonal antibody against caffeine was used throughout the study. The four quality parameters regarding the standard curve were the test midpoint (sensitivity), the measurement range, the relative dynamic range of the signal, and the goodness of fit of the adjusted four-parameter logistic function. All HRP immunoassays showed a higher sensitivity compared to the AP assays. On the basis of all four criteria, it was established that the direct assay format is superior to the indirect format, the immunoassay using HRP TMB fulfilling all requirements best. In a second step, caffeine concentrations in 24 beverage and cosmetics samples were determined and three more quality parameters were assessed with this application. The direct HRP TMB assay showed one of the best intra- and inter-plate precisions and the best accuracy, defined by the correlation of results with those from the chosen reference method liquid chromatography tandem mass spectrometry (LC-MS/MS). Considering all criteria, HRP TMB seems to be the enzyme substrate system of choice preferably used in the direct assay format.

Identification and characterization of individual airborne volcanic ash particles by Raman microspectroscopy

We present for the first time the Raman microspectroscopic identification and characterization of individual airborne volcanic ash (VA) particles. The particles were collected in April/May 2010 during research aircraft flights, which were performed by Deutsches Zentrum für Luft- und Raumfahrt in the airspace near the Eyjafjallajökull volcano eruption and over Europe (between Iceland and Southern Germany). In addition, aerosol particles were sampled by an Electrical Low Pressure Impactor in Munich, Germany. As references for the Raman analysis, we used the spectra of VA collected at the ground near the place of eruption, of mineral basaltic rock, and of different minerals from a database. We found significant differences in the spectra of VA and other aerosol particles (e.g., soot, nitrates, sulfates, and clay minerals), which allowed us to identify VA among other atmospheric particulate matter. Furthermore, while the airborne VA shows a characteristic Raman pattern (with broad band from ca. 200 to ca. 700 cm^?1 typical for SiO₂ glasses and additional bands of ferric minerals), the differences between the spectra of aged and fresh particles were observed, suggesting differences in their chemical composition and/or structure. We also analyzed similarities between Eyjafjallajökull VA particles collected at different sampling sites and compared the particles with a large variety of glassy and crystalline minerals. This was done by applying cluster analysis, in order to get information on the composition and structure of volcanic ash.

Determination of the two major endocannabinoids in human plasma by μ-SPE followed by HPLC-MS/MS

Endocannabinoids (ECs) are endogenous compounds that interact with type-1 and type-2 cannabinoid receptors (CB₁ and CB₂), as well as non-cannabinoid receptors. The multitude of roles attributed to ECs makes them an emerging target of pharmacotherapy for a number of disparate diseases. Here a high-throughput bioanalytical method based on micro SPE (μ-SPE) followed by LC-MS/MS analysis for the simultaneous determination of the two major endocannabinoids 2-arachidonoylglycerol (2-AG) and N-arachidonoylethanolamine (anandamide, AEA) in human plasma is presented. The chromatographic conditions obtained with the fused-core column allowed a good separation in 10 min also of the AG isomers. A very simple and reliable extraction has been optimised by means of C18-modified tips: it requires only 100 μL of plasma and allows the use of minimal volumes of organic solvent. The present method allows a rapid and effective clean-up, which also minimises the isomerisation of 2-AG. The whole procedure has been validated following the FDA guidelines for bioanalytical methods validation: the satisfactory recovery values, the negligible matrix effect and the good values of accuracy and reproducibility make it a simple and high-throughput analytical tool for clinical and biochemical studies on endocannabinoid signaling in humans.

Pyrazole‐substituted Near‐infrared Cyanine Dyes Exhibit pH‐dependent Fluorescence Lifetime Properties

Near‐infrared heptamethine cyanine dye is functionalized with pyrazole derivatives at the meso‐position to induce pH‐dependent photophysical properties. The presence of pyrazole unsubstituted at ¹N‐position is essential to induce pH‐dependent fluorescence intensity and lifetime changes in these dyes. Replacement of meso‐chloro group of cyanine dye IR820 with ¹N‐unsubstituted pyrazole resulted in the pH‐dependent fluorescence lifetime changes from 0.93 ns in neutral media to 1.27 ns in acidic media in DMSO. Time‐resolved emission spectra (TRES) revealed that at lower pH, the pyrazole consists of fluorophores with two distinct lifetimes, which cor‐responds to pH‐sensitive and non‐pH‐sensitive species. In contrast, ¹N‐substituted pyrazoles do not exhibit pH response, suggesting excited state electron transfer as the mechanism of pH‐dependent fluorescence lifetime sensitivity for this class of compounds.     

Microwave‐Assisted Solid‐Phase Synthesis of a 1,2‐Disubstituted Benzimidazole Library by Using a Phosphonium Linker

An efficient and rapid microwave‐assisted solid‐phase method for the synthesis of 5‐methyl‐1,2‐disubstituted benzimidazoles derivatives has been developed. The phosphonium linker, obtained by reaction between polymer‐supported triphenylphosphine and 4‐fluoro‐3‐nitrobenzyl iodide, underwent aromatic substitution with primary amines, followed by one‐pot reaction with aldehydes in the presence of SnCl₂·2H₂O, yielded the benzimidazole system under microwave irradiation. The final products were released from the resin with NaOH under microwave irradiation and were obtained in high purity and good overall yield.     

The Calculus of HLB Values of Polyoxyethylene Fatty Acid Esters from Quality Control Data

In this article, we obtained equations that permit us to calculate the hydrophilic-lipophilic balance (HLB) value of polyoxyethylene esters from quality control data of the raw materials (fatty acids and polyethylene glycol) and the finished product (surfactant). These data include the acid value of the fatty acid, the hydroxyl value of the polyethylene glycol, and the hydroxyl value of the surfactant. These calculations permit us, moreover, to know the mean molecular masses of fatty acids, of polyethylene glycol, of monoester and diester, and the proportion of polyoxyethylene monoester and polyoxyethylene diester.     

Development of a high temperature treatment device for spent nuclear fuel

Novel reprocessing schemes and techniques are the focus of the Euratom FP7 project “Actinide Recycling for Separation and Transmutation” (ACSEPT), where the Paul Scherrer Institute (PSI) is represented in the pyrochemical domain. The subject of investigation is the selective separation of fission products (FPs) from spent nuclear fuel as a head-end step to either classical hydro based or pyro processes which are not yet applied on a large scale. The selective removal of FPs that are major contributors to the overall radiation dose or bear great potentials in terms of radiotoxicity (i.e. cesium or iodine), is advantageous for further processes. At PSI a device was developed to release volatile FPs by means of inductive heating. The heating up to 2,300 °C promotes the release of material that is further transported by a carrier gas stream into an inductively coupled plasma mass spectrometer for online detection. The carrier gas can be either inert (Ar) or can contain reducing or oxidizing components like hydrogen or oxygen, respectively. The development of the device by computer aided engineering approaches, the commissioning and evaluation of the device and data from first release experiments on a simulated fuel matrix are discussed.     

Wetting behavior of pulmonary surfactant aqueous solutions

The wetting properties of pulmonary surfactant aqueous solutions with respect to solid surfaces with different degree of hydrophobicity have been studied. The contact angles θ of drops from a pulmonary surfactant solution onto SiO₂-glass surfaces have been measured as a function of their degree of hydrophobicity θ _w. The completely hydrophilic SiO₂-glass surface is essentially hydrophobized by the animal-derived pulmonary surfactant Curosurf. The hydrophobization depends on the surfactant concentration—the contact angles increase with increasing the Curosurf concentration C _s in the low concentration range, but they remain almost constant in a wide range of C _s >90 μg/ml. Additions like NaCl and bovine serum albumin influence the θ-values. The contact angles θ naturally increase with increasing θ _w but this dependence is not linear—the curve steepens at larger θ _w values. The thickness h of the wetting thin liquid films from Curosurf aqueous solutions depends on the hydrophobicity θ _w of the solid surface and the h(θ _w) curves always pass a minimum. The h-values, as well as the h(θ _w) curve, are mainly determined by the steric and hydrophobic disjoining pressures, which depend on the orientations and conformations of the molecules adsorbed on the solid surface from the very complicated multi-component aqueous solutions.     

Regioselective Sequential Additions of Nucleophiles and Electrophiles to Perfluoroalkylfullerenes: Which Cage C Atoms Are the Most Reactive and Why?

The sequential addition of CN^? or CH₃^? and electrophiles to three perfluoroalkylfullerenes (PFAFs), C_s‐C₇₀(CF₃)₈, C₁‐C₇₀(CF₃)₁₀, and C_s‐p‐C₆₀(CF₃)₂, was carried out to determine the most reactive individual fullerene C atoms (as opposed to the most reactive C?C bonds, which has previously been studied). Each PFAF reacted with CH₃^? or CN^? to generate metastable PFAF(CN)^? or PFAF(CH₃)₂^2? species with high regioselectivity (i.e., one or two predominant isomers). They were treated with electrophiles E⁺ to generate PFAF(CN)(E) or PFAF(CH₃)₂(E)₂ derivatives, also with high regioselectivity (E⁺=CN⁺, CH₃⁺, or H⁺). All of the predominant products, characterized by mass spectrometry and ¹⁹F NMR spectroscopy, are new compounds. Some could be purified by HPLC to give single isomers. Two of them, C₇₀(CF₃)₈(CN)₂ and C₇₀(CF₃)₁₀(CH₃)₂(CN)₂, were characterized by single‐crystal X‐ray diffraction. DFT calculations were used to propose whether a particular reaction is under kinetic or thermodynamic control.