DEUSS: a perdeuterated poly(oxyethylene)-based resin for improving HRMAS NMR studies of solid-supported molecules

A novel resin called DEUSS (perdeuterated poly(oxyethylene)-based solid support) has been prepared by anionic polymerization of deuterated [D4]ethylene oxide, followed by cross-linking with deuterated epichlorohydrin. DEUSS can be suspended in a wide range of solvents including organic and aqueous solutions, in which it displays a high swelling capacity. As measured by proton HRMAS of the swollen polymer, the signal intensity of the oxyethylene protons is reduced by a factor of 110 relative to the corresponding nondeuterated poly(oxyethylene)poly(oxypropylene) (POEPOP) resin, thus facilitating detailed HRMAS NMR studies of covalently linked molecules. This 1H NMR invisible matrix was used for the solid-phase synthesis of peptides, oligoureas, and a series of amides as well as their characterization by HRMAS NMR spectroscopy. On-bead NMR spectra of high quality and with resolution comparable to that of liquid samples were obtained and readily interpreted. The complete absence of the parasite resin signals will be of great advantage, for example, for the optimization of multistep solid-phase stereoselective reactions, and for the conformational study of resin-bound molecules in a large variety of solvents.     

Enzymatic desaturation of fatty acids: delta11 desaturase activity on cyclopropane acid probes

The formation of methylenecyclopropanes by enzymatic desaturation of 11-cyclopropylundecanoic acid (1) and its disubstituted derivatives cis- and trans-3-5 has been investigated using the Delta(11) desaturase of Spodoptera littoralis as model enzyme. Gas chromatography coupled to mass spectrometry analyses of methanolyzed lipidic extracts from tissues incubated with each probe revealed that all the cyclopropyl fatty acids were transformed into the corresponding 11-cyclopropylidene acids, except for compound trans-5 (5b), which was not desaturated at C11. The formation of methylenecyclopropane 9 as the only reaction product from 1 indicates that a potential radical intermediate is too short-lived to allow rearrangement reactions. Information on the Delta(11) desaturase substrate binding domain is provided considering the cyclopropyl probes 3-5 as conformationally restricted analogues of the straight-chain substrates.     

In vitro determination of the release kinetics of peptides and free amino acids during the digestion of food proteins

The kinetics of peptide release during in vitro digestion of 4 protein sources (casein, cod protein, soy protein, and gluten) were investigated. Samples were sequentially hydrolyzed with pepsin (30 min) and pancreatin (2, 4, or 6 h) in a dialysis cell with continuous removal of digestion products. Nondialyzed digests were fractionated by ion-exchange chromatography and ultrafiltration. Animal proteins were digested at a greater rate than plant proteins. Target amino acids of specific enzymes appeared more rapidly in the dialyzed fractions when compared to other amino acids. Throughout the hydrolysis, nondialyzed digests contained a higher proportion of peptide mixtures with basic-neutral properties. Except for gluten, peptide fractions with molecular weights that exceeded 10 kDa (basic-neutral, BN > 10) were rapidly hydrolyzed during the first 2 h of pancreatin digestion. The kinetics of release and the composition of peptide fractions were different when the protein sources were compared. The analysis of amino acids revealed that threonine and proline proportions were relatively high in BN > 10 and in peptide fractions with molecular weight between 10-1 kDa (BN 10-1), while tyrosine, phenylalanine, lysine, and arginine predominated in the low molecular weight (<1 kDa) fractions. More resistant peptides were generally rich in proline and glutamic acid. The role of in vitro digestion assays in dietary protein quality evaluation is discussed.     

Abnormally mild synthesis of bis(dithiolo)pyrroles from 2,5-dimethylpyrroles

[chemical reaction: see text]. Treatment of N-substituted 2,5-dimethylpyrroles 2 with an equilibrated mixture of disulfur dichloride and DABCO in chloroform at 0 degrees C gives pentathiepinopyrroles 3 in moderate yields; further reaction of 3 with the same mixture at room temperature leads, in an extensive reaction cascade, to bis(dithiolo)pyrroles 4 in high yield; 2 can be converted into 4 in a one-pot operation under unusually mild conditions.     

Mimicking photosynthesis in a computationally designed synthetic metalloprotein

While advances in protein design have made possible the construction of protein architectures with nativelike properties and predictable structures and function, there are as of yet no examples of functional, protein-based, solar energy conversion systems. This communication describes the design and characterization of an artificial reaction center (RC) protein that closely resembles the function of the natural photosynthetic RC. The synthetic protein, designed by the protein design program CORE, participates in multiple reduction/oxidation cycles with exogenous acceptors/donors following photoexcitation. The designed metalloprotein, aRC, consists of a tetrahelical bundle functionalized with two bis-histidine bound metal cofactors: a Ru(bpy)2 moiety and a heme group. Two distinct bis-histidine binding sites were engineered for each of these metal centers. Photoexcitation of aRC results in rapid ET from the RuII complex to the heme group (kET >/= 5 x 1010 s-1) yielding a long-lived (70 ns) charge-separated state (CSS), RuIII/FeII. This long-lived CSS participates in subsequent ET reactions with exogenous donors and acceptors in multiple photocycles, thus mimicking the basic function of native photosynthetic RCs. This study illustrates the successful design and construction of a protein-based functional charge separation device using a combination of automated computational protein design and knowledge of the engineering principles of biological electron tunneling extracted from natural electron-transfer systems. To our knowledge, this represents the first example of a functional protein-based artificial reaction center.     

Electroreduction of some pyridine carboxamides on carbon electrodes in aqueous solutions

The electroreductions of the NAD⁺ model compounds nicotinamide (I), N₁-methyl nicotinamide (II), N′-methyl nicotinamide (III) and isonicotinamide (IV) on carbon electrodes have been studied in aqueous media in the pH range 0–12 by linear-sweep cyclic voltammetry (Scheme 1, I-IV). Logarithmic analyses of the reduction peaks were performed by computing the convolution of the current with time as a function of the potential. On the basis of the experimental results it was concluded that the irreversibility of the electron transfers increased when a glassy carbon electrode was used, and this irreversibility being more marked when a plastic formed carbon electrode was employed. The reduction processes occurred with more difficulty on carbon electrodes than on mercury electrodes. Both the reduction and the reoxidation (when occurred) processes changed with respect to those observed on mercury electrodes, being irreversible electron transfers the rate-determining steps in most cases. Thus, for compounds I, II and III at pH < 2 the reductions occurred by the uptake of two electrons and two H⁺ ions, and the rate determining step was found to be the first one-electron transfer, for I and III, and the irreversible second electron transfer, preceded by the uptake of an H+ ion, for II. At pH>3 the processes consisted of electrodimerization reactions, preceded by the protonation of the heterocyclic nitrogen in cases I and III. The second electron transfer of the electroreduction of IV always appeared irreversible, in contrast with that found for mercury electrodes.     

Study of the drying zirconia gel-precipitates using thermal analysis

Thermoanalytical techniques (TG, DTG, DTA and EGA) can be helpful in studying gel compositions and relating the chemical history and the role of the precipitant to the chemical properties of gels. The objective of our work was to determine the influence of the initial conditions in the reaction mixture on the product characteristics. Zirconia gels were prepared by the gelprecipitation method by the hydrolysis of zirconium tetrachloride dissolved in methanol. The substitution of water by methanol was chosen in order to obtain a reaction medium in which better control of the hydrolysis and condensation reactions of the zirconium precursor were achieved and thus also better control of the final properties of the dried zirconia gel-precipitates could be obtained. The nature of the hydrated zirconia gels obtained during the gelation process is strongly influenced by the conditions of the reaction mixture, e.g. concentration of the zirconium precursor, the mixing rate and particularly by the amount of water added. To distinguish between various types of water in the gel-precipitates, the furnace atmosphere and the partial water pressure were altered appropriately. It was shown that initial zirconium to water molar ratio has a significant effect on the properties of the final products. It was assumed that, according to the preparation conditions, three different types of water are present in the formed zirconia gel-precipitates. Modification of the dehydration processes of zirconia gel-precipitates enables control of the final microstructural and surface properties of the dried gels which are suitable for further catalysts support as well as mixed oxide preparation.     

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme® RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na₂CO₃ solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 U_H/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 U_H/mL_solvent) and 5.0 mL of Na₂CO_3(sat) at 40°C for 6 h.     

Preparation and properties of dinitrogen complexes of molybdenum and tungsten with trimethylphosphine as coligand : III. Synthesis and properties of cis-[W(N2)2(PMe3)4], trans-[W(C2H4)2(PMe3)4] and [M(N2)(PMe3)5] (M = Mo,W). The crystal and molecular structure of [Mo(N2)(PMe3)5]

The reduction of [WCl₄(PMe₃)₃] with dispersed sodium, under dinitrogen, gives cis-[W(N₂)₂(PMe₃)₄], while under ethylene trans-[W(C₂H₄)₂(PMe₃)₄] is obtained. The ethylene complex can also be prepared by displacement of the dinitrogen molecules in cis-[W(N₂)₂(PMe₃)₄] by ethylene at room temperature and pressure. Interaction of cis-[M(N₂)₂(PMe₃)₄] complexes (M = Mo, W), with PMe₃, under helium or argon, yields [M(N₂)(PMe₃)₅]. The molybdenum complex crystallizes in the orthorhombic space group Pnma, with a 22.063(6), b 12.106(4), c 9.745(4) Å. The Mo—P distance trans to the dinitrogen ligand (2.483(7) Å) is slightly longer than the average of the other four Mo—P bonds (2.460(5) Å).     

Determination of trace level impurities in uranium compounds by ICP-AES after organic extraction

The determination was studied of Al, B, Be, Cd, Ca, Co, Cu, Mg, Mn, Mo, Pb, Si, Sn, V, Cr, Ni, and Fe as trace level impurities in uranium compounds by ICP-AES after extraction of uranium with three different mixtures of di-(2-ethyl-hexyl) phosphate (D2EHP) and tri-(2-ethyl-hexyl)-phosphate (T2EHP) in solvents like toluene, carbon tetrachloride, hexane and cyclohexane. The study was carried out in presence of different concentrations of HCl and HNO(3). A single extraction with D2EHP in cyclohexane using nitric acid as matrix was sufficient to reduce the U(3)O(8) concentration from 100 g/l to 100 microg/ml. The ICP-AES instrumentation applied, allowed the determination of metal concentrations ten-times lower than those usually found in nuclear grade U(3)O(8). To check the efficiency of the extraction and the accuracy of the proposed method, Certified Reference Materials were used in the dissolution and extraction steps. The method described can be used for the determination of trace metals in nuclear grade U(3)O(8).