Preparative isolation and purification of anti‐tumor agent ansamitocin P‐3 from fermentation broth of Actinosynnema pretiosum using high‐performance counter‐current chromatography

Ansamitocin P‐3 is a potent anti‐tumor maytansinoid found in Actinosynnema pretiosum. However, due to the complexity of the fermentation broth of Actinomycete, how to effectively separate ansamitocin P‐3 is still a challenge. In this study, both analytical and preparative high‐performance counter‐current chromatography were successfully used to separate and purify ansamitocin P‐3 from fermentation broth. A total of 28.8 mg ansamitocin P‐3 with purity of 98.4% was separated from 160 mg crude sample of fermentation broth in less than 80 min with the two‐phase solvent system of hexane–ethyl acetate–methanol–water (0.6:1:0.6:1, v/v/v/v). The purity and structural identification were determined by HPLC, ¹H NMR, ¹³C NMR and mass spectroscopy.     

Micro fabrication of microlens arrays by micro dispensing

In this study, master of the microlens arrays is fabricated using micro dispensing technology, and then electroforming technology is employed to replicate the Ni mold insert of the microlens arrays. Finally, micro hot embossing is performed to replicate the molded microlens arrays from the Ni mold insert. The resin material is used as the dispensing material, which is dropped on a glass substrate. The resin is exposed to a 380 W halogen light. It becomes convex under surface tension on the glass substrate. A master for the microlens arrays is then obtained. A 150‐nm‐thick copper layer is sputtered on the master as an electrically conducting layer. The electroforming method replicates the Ni mold insert from the master of the microlens arrays. Finally, micro hot embossing is adopted to replicate the molded microlens arrays. The micro hot embossing experiment employs optical films of polymethylmethacrylate (PMMA) and polycarbonate (PC). The processing parameters of micro hot embossing are processing temperature, embossing pressure, embossing time, and de‐molding temperature. Taguchi's method is applied to optimize the processing parameters of micro hot embossing for molded microlens arrays. An optical microscope and a surface profiler are utilized to measure the surface profile of the master, the Ni mold insert and the molded microlens arrays. AFM is employed to measure the surface roughness of the master, the Ni mold insert and the molded microlens arrays. The sag height and focal length are determined to elucidate the optical characteristics of the molded microlens arrays. Copyright © 2009 John & Sons, Ltd.     

Density functional theory investigation on the electronic structure of furo[3,4-b]pyridine-type heterocyclics: from monomer to polymer

The geometries and electronic properties of six polymers based on furo[3,4-b]pyridine-type heterocyclics were studied using density functional theory (DFT) at the B3LYP/6-31G(d) level. Bond lengths, bond critical point (BCP) properties, nucleus-independent chemical shift (NICS), and Wiberg bond indexes (WBIs) are analyzed and correlated with conduction properties. The changes of bond length, BCP properties, NICS, and WBIs all show that the conjugational degree is increased with main chain extension. The changes of NICS also show that the conjugation is stronger in the central section than in the outer section. And the HOMO–LUMO energy gap (E _g) is decreased steadily upon chain elongation. The results suggest that the six polymers all have lower energy gaps (in the range of 0.39–0.58 eV), which indicate that these proposed polymers are good candidates for the conductive materials.     

Preparation and properties of PU/MCMMT nanocomposites

The cetyltrimethyl ammonium bromide (CTAB) was used as a swelling agent to be intercalated into the galleries of the montmorillonite (MMT) platelets to get the organic MMT (CMMT). Then 4,4′‐diphenylmethane diisocyanate (MDI) were grafted on CMMT by the reaction between hydroxyls in organic MMT platelets and MDI to synthesize the MDI modified CMMT (MCMMT). Polyurethane (PU)/MCMMT composites were prepared by situ polymerization. The MCMMT platelets dispersed in a PU matrix in nanometer scale. The dispersion and intercalation degree of the MCMMT platelets decreased with increase in the content of MCMMT. Under the same content of fillers, the tensile strength and tear strength of PU/MCMMT nanocomposites were higher than those of PU/organic MMT nanocomposites. The reinforcing effect of the MCMMT platelets to the PU was better than that of the organic MMT platelets. With increase in the content of MCMMT, the tensile strength and tear strength of the PU/MCMMT nanocomposites were increased, while the extent of the increase slowed down. Compared with those of PU, the thermal stability of PU/MCMMT nanocomposites was increased. Copyright © 2009 John Wiley & Sons, Ltd.     

新雌激素衍生物的合成及抗辐射升白生物活性

以17α-炔雌二醇和17β-雌二醇为原料,分别与烯丙基溴、溴代异戊烯反应,通过一步反应合成了4个新雌激素衍生物,分别是17α-炔雌二醇-3-烯丙基醚(ES-1),17β-雌二醇-3-烯丙基醚(ES-2),17α-炔雌二醇-3-异戊烯基醚(ES-3)和17β-雌二醇-3-异戊烯基醚(ES-4),产率分别为92.2%,73.7%,65.9%和67.6%.化合物通过1HNMR,13CNMR,IR,MS及元素分析确证了结构,4个化合物均未见文献报道.初步的抗辐射升白生物活性研究表明,4个化合物对137Csγ-射线引起的小鼠白细胞低下及造血系统功能损伤有一定的保护作用.其中ES-3的升白作用最佳,经统计学处理,3个给药剂量组与对照组比,升白作用均有非常显著性差异(P0.001).     

黄酮类化合物结构修饰及抗肿瘤活性研究进展

我国天然药物和中药资源丰富,种类繁多,可作为先导化合物进行修饰以提高可成药性。其中,黄酮类化合物是自然界中一种常见的天然多酚类化合物,在抗肿瘤方面具有其独特的生物活性;对其进行结构修饰与改造,可提高黄酮类化合物的生物利用度和抗肿瘤活性。本文通过查阅并整理近几年国内外的黄酮类化合物的相关文献,对黄酮类化合物的母核位点进行结构修饰与改造所得的101个黄酮类衍生物及其抗肿瘤活性及作用机制进行综述,同时讨论了构效关系,以期为黄酮类衍生物的结构修饰和抗肿瘤研究提供参考和帮助。     

基于GUI的阿贝-波特滤波实验的计算机仿真

介绍了阿贝-波特空间滤波的实验原理,在Matlab环境下建立了带有图形用户界面（GUI）的计算机仿真平台.不仅可以准确地完成针对不同输入图像、不同滤波要求的滤波过程,还可以通过调整滤波器参数观察滤波效果的差异,形象地展现光学空间滤波过程的物理本质,提高教学效果.