Acoustic wave propagation in high-pressure system

Recently, substantial attention is paid to the development of methods of generation of pulsations in high-pressure systems to produce pulsating high-speed water jets. The reason is that the introduction of pulsations into the water jets enables to increase their cutting efficiency due to the fact that the impact pressure (so-called water-hammer pressure) generated by an impact of slug of water on the target material is considerably higher than the stagnation pressure generated by corresponding continuous jet. Special method of pulsating jet generation was developed and tested extensively under the laboratory conditions at the Institute of Geonics in Ostrava. The method is based on the action of acoustic transducer on the pressure liquid and transmission of generated acoustic waves via pressure system to the nozzle. The purpose of the paper is to present results obtained during the research oriented at the determination of acoustic wave propagation in high-pressure system. The final objective of the research is to solve the problem of transmission of acoustic waves through high-pressure water to generate pulsating jet effectively even at larger distances from the acoustic source. In order to be able to simulate numerically acoustic wave propagation in the system, it is necessary among others to determine dependence of the sound speed and second kinematical viscosity on operating pressure. Method of determination of the second kinematical viscosity and speed of sound in liquid using modal analysis of response of the tube filled with liquid to the impact was developed. The response was measured by pressure sensors placed at both ends of the tube. Results obtained and presented in the paper indicate good agreement between experimental data and values of speed of sound calculated from so-called "UNESCO equation". They also show that the value of the second kinematical viscosity of water depends on the pressure.     

Photopyroelectric spectroscopy of Sb<Subscript>2</Subscript>O<Subscript>3</Subscript> - ZnO ceramics

Photopyroelectric spectroscopy is used to study the band-gap energy of the ceramic (ZnO + xSb₂O₃), x = 0.1 - 1.5 mol% and the ceramic (ZnO + 0.4 mol%  Bi₂O₃ + xSb₂O₃), x = 0 - 1.5 mol% sintered at isothermal temperature, 1280 °C, for 1 and 2 hours. The wavelength of incident light, modulated at 9 Hz, is kept in the visible range and the photopyroelectric spectrum with reference to doping level is discussed. The band-gap energy is reduced from 3.2 eV, for pure ZnO, to 2.86, 2.83 eV for the samples without Bi₂O₃at 0.1 mol% of Sb₂O₃ for 1 and 2 hours of sintering time, respectively. It is reduced to 2.83, 2.80 eV for the samples with Bi₂O₃ at 0 mol% of Sb₂O₃ for 1 and 2 hours of sintering time, respectively. The steepness factor σ_A which characterizes the slop of exponential optical absorption is discussed with reference to the doping level. The phase constitution is determined by XRD analysis; microstructure and compositional analysis of the selected areas are analyzed using SEM and EDX.     

Development of an optical refractometer by analysis of one-dimensional photonic bandgap structures with defects

A theoretical analysis of an optical fiber photonic-bandgap-based refractometer is presented. The design is based on a quarter-wave reflector with one defect. By modifying both the real and the imaginary parts of the index of refraction of the defects we begin to change either the frequency or the amplitude of the localized optical mode. So we could fabricate a specific optical fiber refractometer by combining all the variables: index of refractive index of the defects and the rest of layers, thickness of the defect, number of layers, etc. to yield a large set of design possibilities, for example, detecting wider or thinner ranges of refractive indices, or controlling the detection accuracy. Some rules for the practical implementation of the refractometer are given.     

Thermal Degradation of Polysiloxane Coatings on E-Glass Fiber. A FTIR Study

Fourier Transform Infrared Spectroscopy and Thermal Analysis have been used to study the thermal and termooxidative degradation of polysiloxane coatings obtained by treating E-glass fiber with aqueous solutions of 3-chloropropyltriethoxysilane. Initial weight losses were due to polymerization of the coatings. Severe oxidative degradations were observed at temperatures above 180°C. At 550°C the residue of the coating was found to be silica with free silanol groups.     

Conformal Galilei algebras,symmetric polynomials and singular vectors

We classify and explicitly describe homomorphisms of Verma modules for conformal Galilei algebras \({\mathfrak {cga}}_\ell (d,\mathbb {C})\) with \(d=1\) for any integer value \(\ell \in {\mathbb {N}}\). The homomorphisms are uniquely determined by singular vectors as solutions of certain differential operators of flag type and identified with specific polynomials arising as coefficients in the expansion of a parametric family of symmetric polynomials into power sum symmetric polynomials.     

Development of special optical fibers for evanescent-wave chemical sensing

The paper summarizes results achieved in the Institute of Radio Engineering and Electronics in the field of investigation and fabrication of novel fiber-optic structures for evanescent-wave chemical sensing. Several approaches for increasing the evanescent-wave sensitivity of multimode silica optical fibers to gaseous and liquid chemicals are shown. These approaches make use of the decrease of the core diameter in sectorial and capillary sectorial fibers, modification of trajectories of optical rays in the cores of inverted-graded-index fibers, tailoring of the refractive index of porous layers applied on silica cores, an output mode filter preventing the detection of rays propagating at low axial angles or fibers bent in single or multiple turns. Presented at the 1st Czech-Chinese Workshop “Advanced Materials for Optoelectronics”, Prague, Czech Republic, June 13–17, 1998. This work was supported by the Grant Agency of the Czech Republic (projects No. 102/96/0939 and No. 102/98/1358) and by joint project No. 4104 of AS CR and CNRS, France.     

Reversible C=C Bond Activation by an Intramolecularly Coordinated Antimony(I) Compound

The reaction of N,C,N-chelated stibinidene ArSb ( 1 ) (Ar=C₆H₃-2,6-(CH=NtBu)₂) with selected N-alkyl/aryl-maleimides RN(C(O)CH)₂ (R=Me, tBu, Ph) gave the addition products with bridged bicyclic [2.2.1] structure containing an antimony atom at the bridgehead position, fused with a 6-membered benzene and a 5-membered N-alkyl/aryl-pyrrolidine ring. These compounds were completely characterized. More importantly, additional studies showed that these reactions are reversible in solution, thereby representing an unprecedented reversible activation of a C=C bond by an antimony(I) compound.     

Cyanine-Flavonol Hybrids for Near-Infrared Light-Activated Delivery of Carbon Monoxide

Carbon monoxide (CO) is an endogenous signaling molecule that controls a number of physiological processes. To circumvent the inherent toxicity of CO, light-activated CO-releasing molecules (photoCORMs) have emerged as an alternative for its administration. However, their wider application requires photoactivation using biologically benign visible and near-infrared (NIR) light. In this work, a strategy to access such photoCORMs by fusing two CO-releasing flavonol moieties with a NIR-absorbing cyanine dye is presented. These hybrids liberate two molecules of CO in high chemical yields upon activation with NIR light up to 820 nm and exhibit excellent uncaging cross-sections, which surpass the state-of-the-art by two orders of magnitude. Furthermore, the biocompatibility and applicability of the system in vitro and in vivo are demonstrated, and a mechanism of CO release is proposed. It is hoped that this strategy will stimulate the discovery of new classes of photoCORMs and accelerate the translation of CO-based phototherapy into practice.     

Effect of concentration and particle size on nonlinearity of Au nano-fluid prepared by γ (Co) radiation

Nonlinear properties of Au nano-fluid prepared by γ-radiation method at different concentrations were investigated. Measurements of nonlinear refractive index and nonlinear absorption coefficient were carried out using a single beam Z-scan technique. A green CW laser beam operated at 532 nm was used as excitation source. The Au nano-fluid shows a good third order nonlinear response. The sign of the nonlinear refractive index is found to be negative and the magnitude is in the order of 10⁻⁷ cm²/W. This nonlinear effect increases as the concentration increases from 3.119 × 10⁻⁴ to 2.354 × 10⁻³ M which correspond to particle sizes of 4.0-30.5 nm, respectively. A good linear relationship was obtained between nonlinear refractive index and concentration. However the relationship between nonlinear refractive index and particle size was nonlinear behavior.