Flow injection analysis for calcium in serum,water and waste waters by spectrophotometry and by ion-selective electrode

The Flow Injection technique is shown to provide fast, reliable and sensitive methods for the determination of calcium in various aqueous as well as serum samples; spectrophotometric or potentiometric detection can be used. At sampling rates of 100–110 samples per hour, with 30-μl sample injections, high reproducibility of measurement and low reagent consumption are achieved in both methods. In the spectrophotometric method, the analytical readout is available within 12 s after sample injection at a total reagent consumption of 0.75 ml per analysis. The potentiometric measurement of the calcium activity in serum is placed on a reliable basis by alternating measurements of serum samples and aqueous standards without incurring any non-reproducible changes in potential between aqueous and serum solutions. This permits the simultaneous determination of pH and pCa, the analytical readout being available within XXX s of sample injection. The good agreement between the results obtained with the Flow Injection method and those attained by atomic absorption and EDTA titrations as well as pCa stat-measurements show that the new methods are potentially suitable for routine analysis.     

IAEA quality control studies on determining trace elements in bioindicators

Twenty laboratories from 17 countries around the world participated in two analytical quality control exercises, coded NAT-5 and NAT-6, on determining trace and minor elements in plant bioindicator samples. 1398 laboratory mean values for 51 elements were submitted for two lichen and two moss materials. The submitted measurement results were evaluated as interlaboratory comparison (IC) exercises and as proficiency tests (PT) following standard procedures developed by the International Atomic Energy Agency (IAEA). The evaluations confirmed good performance of the participating laboratories for many elements. Furthermore, the laboratories performance based on IC criteria improved from the first exercise to the second one. Subsequent NAT-5 evaluation revealed systematic differences between the analytical values obtained non-destructively or after the total sample dissolution and the measurements following nitric acid sample dissolution (without the use of hydrofluoric acid) for some elements. The most critical elements for this kind of discrepancies appeared to be Al, Ca, Cr, Fe, Na, Ni, and Pb. After changing analytical methodologies in the concerned laboratories, more consistent values for those elements were obtained in NAT-6. This revised version was published online in August 2006 with corrections to the Cover Date.     

Effect of selenium oxidation state on cadmium translocation in chamomile plants

Syntheses and spectral characteristics of cadmium(II) compounds (CdSeO₄, CdSeO₃, and Cd(NCSe)₂(nia)₂) containing selenium in oxidation states (VI), (IV), and (-II) are described. In Cd(NCSe)₂(nia)₂, nicotinamide (nia) and selenocyanate anions are bonded to Cd atom as N-donor monodentate ligands. Nicotinamide is coordinated through the ring nitrogen atom. The effects of these selenium compounds as well as Cd(NCS)₂(nia)₂ on the growth and Cd accumulation in roots and shoots of hydroponically cultivated chamomile plants (cultivar Lutea) were studied. In the applied concentration range (12–60 μmol dm⁻³) Cd(NCS)₂(nia)₂ affected neither the length nor the dry mass of roots and shoots. Other compounds applied at 24 μmol dm⁻³ and 60 μmol dm⁻³ significantly reduced dry mass of roots and shoots. Selenium oxidation state in the cadmium compounds affected Cd accumulation in plant organs as well as Cd translocation within the plants, which was reflected in the values of bioaccumulation (BAF) and translocation factors (S/R). Cd amount accumulated by shoots was lower than that in the roots. The highest BAF values determined for Cd accumulation in shoots were obtained with CdSeO₄. Substitution of S with Se in the Cd(NCX)₂(nia)₂ (X = Se or S) caused an increase of Cd translocation into the shoots. Presented at the XVIIIth Slovak Spectroscopic Conference, Spišská Nová Ves, 15–18 October 2006.     

Determination of imazalil by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

A simple, rapid and reproducible capillary isotachophoretic on-line coupled with capillary zone electrophoresis (CITP-CZE) method for the determination of IMz in food packaging extracts and its residues in apples is described. A good separation of the IMZ from other sample constituents was achieved within 15 minutes without any sample clean up. Method characteristics (linearity, accuracy, intra-assay and detection limit) were determined. Less amount of time involved, sufficient sensitivity and low running cost are the important attributes of CITP-CZE method.     

Kinetic Determination of Microquantities of Rutin by Perturbation of the Bray-Liebhafsky Oscillatory Reaction in an Open System

A kinetic method is described for the microquantitative (microconcentration/microvolume) determination of rutin based on potentiometric monitoring of the concentration perturbations of the Bray-Liebhafsky (BL) oscillatory reaction being in a non-equilibrium stationary state close to a bifurcation point. The experiments are carried out in an open reactor. The response of the matrix system to perturbations by different concentrations of rutin ethanolic solutions is followed by a Pt-electrode. In the concentration range between 7.8×10^–8moldm^–3 and 9.1×10^–6mol dm^–3, we found a linear dependence of the maximal potential shift, E_m, on the logarithm of the rutin concentrations. The unknown concentrations can be determined from the calibration curve up to an accuracy of ±5%. The detection limit is 3.6×10^–8mol dm^–3. The amount of required sample can be as small as 10µL.     

Sorption of caesium and strontium on clinoptilolite-and mordenite-containing sedimentary rocks

The sorption of caesium and strontium from its aqueous solutions by ten clinoptilolite-and mordenite-containing sedimentary materials from Slovakia, Bulgaria, Ukraine and Greece was investigated by batch-type procedure and radiotracer techniques. The concentration of the solutions, that were performed in and without the presence of competing cations (0.005 mol·dm⁻³ KCl) varied between 1·10⁻⁴ and 5·10⁻² mol·dm⁻³. The uptake and distribution coefficient (K _d ) values determined for the materials of the different origin, were correlated with their mineralogical composition and gross cation exchange capacity (CEC). The identification of the specific uptake sites was attempted on the basis of the sorption isotherms and the content of exchangeable cations. The experimental results provide information on the suitability of the individual materials for the treatment of radioactive wastes and their application as backfills in potential nuclear waste repositories.     

Kinetics of the dehydration of CsNd(SO4)2 4 H2O

The kinetics of the dehydration of CsNd(SO₄)₂ · 4 H₂O to CsNd(SO₄)₂ · H₂O and then to CsNd(SO₄)₂ are studied by isothermal weight change. The reactions are phase-boundary-controlled. Reaction mechanism and activation energy depend on sample weight.     

Über Reaktionen von Nitrosophenolen, 4. Mitt.: Reaktion von Nitrosonaphtholen mit Naphtholen

Zusammenfassung Die Reaktion von 1-Nitroso-2-naphthol mit 1-und 2-Naphthol sowie die Reaktion von 2-Nitroso-1-naphthol mit 2-Naphthol in Äthanol und in Äther bei Anwesenheit von HNO₃ gibt 5H-Dibenzo[a,j]phenoxazon-(5) (I), 5H-Dibenzo[a,j]phenoxazon-(5)-14-oxid (II), 5H-Dibenzo[a,h]phenoxazon-(5) (III) sowie 5H-Dibenzo[a,h]phenoxazon-(5)-14-oxid (IV). Es wurde ein Reaktionsmechanismus vorgeschlagen und die Konstitution der hergestellten Verbindungen spektrophotometrisch und potentiometrisch bestimmt.

---

The reaction of 1-nitroso-2-naphthol with 2-and 2-naphthol and the reaction of 2-nitroso-1-naphthol with 2-naphthol in ethanol or ether in the presence of nitric acid have been studied. The main reaction products isolated were the dibenzophenoxazones I–IV. The reaction mechanism for their formation is proposed.

---

---

Mit 4 Abbildungen     

On the z-counting polynomial for edge-weighted graphs

The construction of the Z-counting polynomial for edge-weighted graphs is discussed.Dedicated to Professor Haruo Hosoya (Tokyo) on the occasion of his 55th birthday for enriching chemical graph theory with the elegant concept of the Z-counting polynomial.     

Synthesis and Transformation of Methyl 2‐(6‐Hydroxy‐2‐phenylpyrimidin‐4‐yl)acetate: Simple Preparation of Pyrimidines with Heterocyclic Substituents

A simple and efficient synthesis of four new substituted pyrimidines, compounds 9a – d , from the title compound 3 is described. Conversion of 3 to methyl (E)‐3‐(dimethylamino)‐2‐(6‐methoxy‐2‐phenylpyrimidin‐4‐yl)prop‐2‐enoate ( 4 ), followed by condensation with various dinucleophiles according to the ‘enaminone methodology’, afforded the target compounds 9 in medium‐to‐good yields.