百万帧频中波红外图像传感器研究

设计了一款64×64面阵规格、片上集成存储器的超高速红外焦平面数字读出集成电路,将其与中波红外焦平面探测器芯片进行了互连,成功研制出超高速64×64中波红外图像传感器.实验结果表明,所研制超高速红外图像传感器的帧频达到1 MHz,存储深度为100帧,对黑体温度呈现近似线性响应,具有优于3.6K的温度分辨率.     

一种微波加热装置的风冷散热研究

微波加热装置工作过程会散发大量的热量,如果不能及时排出,会造成输出功率的下降.本文以九个磁控管加热单元组成的微波加热装置为研究对象,首先提出一种风冷散热结构设计,接着通过Fluent热仿真软件验证结构设计的合理性,然后通过对比分析加热装置进风口位置、面积大小等因素对散热效果的影响,对散热结构进行改进,进一步提高了内部磁...     

A facile method for the synthesis of large‐size Ag nanoparticles as efficient SERS substrates

Silver nanoparticles (Ag NPs) enjoy a reputation as an ultrasensitive substrate for surface‐enhanced Raman spectroscopy (SERS). However, large‐scale synthesis of Ag NPs in a controlled manner is a challenging task for a long period of time. Here, we reported a simple seed‐mediated method to synthesize Ag NPs with controllable sizes from 50 to 300 nm, which were characterized by scanning electron microscopy (SEM) and UV–Vis spectroscopy. SERS spectra of Rhodamine 6G (R6G) from the as‐prepared Ag NPs substrates indicate that the enhancement capability of Ag NPs varies with different excitation wavelengths. The Ag NPs with average sizes of ~150, ~175, and ~225 nm show the highest SERS activities for 532, 633, and 785‐nm excitation, respectively. Significantly, 150‐nm Ag NPs exhibit an enhancement factor exceeding 10⁸ for pyridine (Py) molecules in electrochemical SERS (EC‐SERS) measurements. Furthermore, finite‐difference time‐domain (FDTD) calculation is employed to explain the size‐dependent SERS activity. Finally, the potential of the as‐prepared SERS substrates is demonstrated with the detection of malachite green. Copyright © 2016 John Wiley & Sons, Ltd.     

Resonantly enhanced off-specular X-ray scattering from polymer/polymer interfaces<Superscript>⋆</Superscript>

We have used measurements of the absolute intensity of diffuse X-ray scattering to extract the interfacial tension of a buried polymer/polymer interface. Diffuse scattering was excited by an X-ray standing wave whose phase was adjusted to have a high intensity at the polymer/polymer interface and simultaneously a node at the polymer/air interface. This method permits the capillary-wave-induced roughness of the interface, and hence the interfacial tension, to be measured independently of the polymer/polymer interdiffusion.     

飞秒脉冲振幅和相位的无干涉条纹重构法测量

对作者所提出的无干涉条纹直接电场重构测量飞秒脉冲的振幅和相位的新方法作出进一步理论分析，并通过实验测量说明该方法的优越性.该方法克服了传统的SPIDER方法的弊病，能得到一组无干涉条纹的图像，排除传统方法必须使用傅里叶变换滤波消除干涉条纹而引进的系统误差，使得该方法能够采用较简便设备且能较准确测量飞秒脉冲强度轮廓和相位.最后给出同一条件下新方法和传统SPIDER方法分别重构的脉冲强度自相关曲线与实验测量结果的比较，以说明新方法的有效性和优越性.     

Removal of oxygen from silicon by electron beam melting

Small amounts of multicrystalline silicon were melted in an electron beam furnace in different experimental conditions in order to investigate the oxygen evaporation behavior during the electron beam melting (EBM) process. The oxygen content level before and after EBM was determined by secondary ion mass spectroscopy. The oxygen content was reduced from 6.177 to 1.629 ppmw when silicon was melted completely at 15 kW with removal efficiency up to 73.6 %. After that, it decreased continually to <0.0517 ppmw when the refining time exceeded 600 s with a removal efficiency of more than 99.08 %. During the melting process, the evaporation rate of silicon is 1.10 × 10^?5 kg/s. The loss of silicon could be reduced up to 1.7 % during oxygen removal process to a desirable figure, indicating EBM is an effective method to remove oxygen from silicon and decrease the loss of silicon.     

集成芯片LED场地照明灯新型叠片散热器热分析

针对大功率LED场地照明集成芯片散热问题,提出了一种新型散热器结构。该散热器利用高导热纯铝材料,采用叠片的方式成型。采用实验和有限元模拟相结合的研究方法,对包括直流电源的新型叠片式LED散热器的散热性能进行了研究。结果表明：LED电源达到稳态所需时间较长,最终能够稳定在一个较低的温度范围。叠片式纯铝散热器通过增加散热面积和提高散热器材料的导热系数能有效降低LED结温。所设计的散热器和选择的电源在自然对流条件下能够很好地满足250 W大功率LED散热要求。     

Searching for high-K isomers in the proton-rich A～80 mass region

Configuration-constrained potential-energy-surface calculations have been performed to investigate the K isomerism in the proton-rich A～ 80 mass region. An abundance of high-K states are predicted. These high-K states arise from two and four-quasi-particle excitations, with K~π= 8~+ and K~π= 16~+, respectively. Their excitation energies are comparatively low, making them good candidates for long-lived isomers. Since most nuclei under study are prolate spheroids in their ground states, the oblate shapes of the predicted high-K states may indicate a combination of K isomerism and shape isomerism.     

V形固体激光腔的动力学分析与改进

对通用的V形固体激光腔进行了全面的动力学分析，指出了它的优缺点，它的致命缺点是在动力学因子1ft≈1l1-f附近出现高损耗的运行区，激光器无法运行.为了克服这一缺点，在一种改进的V形腔基础上提出了一种更为紧凑的V形改进腔. 关键词： 固体激光腔 V形固体激光腔 改进的V形腔     

The sloshing of stratified liquid in a two-dimensional rectangular tank

The sloshing of inviscid liquid of stratified density in a rectangular tank is analyzed.As the flow is no longer irrotional,the governing equation is found to be quite different from the Laplace equation used for the liquid of constant density.In particular it contains terms of mixed temporal and spatial derivatives.The problem is solved based on the variable separation method and Laplace transform for the constant Vaisala-Brunt frequency.It is found that the stratification of density may have small effects...