Lewis acid catalysis in heterolysis reactions of glycol ether radicals mimicking diol dehydratase-catalyzed reactions

Zinc bromide-catalyzed heterolysis reactions of glycol ether radicals were studied by laser flash photolysis methods, which gave the binding constants and catalytic rate constants for fragmentation. The Lewis acid-catalyzed heterolysis reactions mimic a putative reaction pathway in diol dehydratase-catalyzed reactions and are potentially useful polar processes for incorporation into conventional radical chain reaction sequences. [reaction: see text]     

LC Determination of Podophyllum Lignans and Flavonoids in Podophyllum emodi Wall.var.chinesis Sprague

A high-performance liquid chromatographic method for the simultaneous separation and determination of nine podophyllum lignans and two flavonoids in Podophyllum emodi Wall.var.chinesis Sprague was established. The separation was performed with the following condition: column, Kromasil-C18, 5 μm, 15 × 0.46 cm; solvent A, 25 mM phosphate buffer, pH 2.5; solvent B, methanol; gradient, 50/50/70% B at 0/13/33 min; flow rate, 0.8 mL min^?1; detection, UV 270 nm. β-Apopicropodophyllin was used as the internal standard. The samples of P. emodi Wall.var.chinesis Sprague from different sources were examined by the developed method. In addition, three methods for sample preparation were discussed. It is shown from the results that refluxing in chloroform displays high extraction efficiency.     

聚苯胺复合材料研究进展

综述了聚苯胺/无机物复合材料和聚苯胺/有机高聚物复合材料的合成方法，性能特征，并展望了聚苯胺复合材料的研究，应用前景。     

Electrochemical Determination of Ascorbic Acid in Room Temperature Ionic Liquid BPPF6 Modified Carbon Paste Electrode

A room temperature ionic liquid N‐butylpyridinium hexafluorophosphate (BPPF₆) was used as a binder to make an ionic liquid modified carbon paste electrode (IL‐CPE), which showed good characteristics such as simple preparation procedure, fast electrochemical response and good conductivity. The electrochemical oxidation of ascorbic acid (AA) on the new IL‐CPE was carefully studied. The oxidation peak potential of AA on the IL‐CPE appeared at 109 mV (vs. SCE), which was about 338 mV decrease of the overpotential compared to that obtained on the traditional carbon paste electrode (CPE) and the oxidation peak current was increased for about four times. The electrochemical parameters of AA on the IL‐CPE were calculated with the charge transfer coefficient (α) and the electrode reaction rate constant (k_s) as 0.87 and 0.800 s^?1, respectively. Based on the relationship of the oxidation peak current and the concentration of AA a sensitive analytical method was established with cyclic voltammetry. The linear range for AA determination was in the range from 1.0×10^?5 to 3.0×10^?3 mol/L with the linear regression equation as I_p (μA)=?2.52–0.064C (μmol/L) (n=13, γ=0.9942) and the detection limit was calculated as 8.0×10^?6 mol/L (3σ). The proposed method was free of the interferences of coexisting substances such as dopamine (DA) and amino acids etc., and successfully applied to the vitamin C tablets determination.     

Three‐Component Reactions with (S)‐Methyl Pyroglutamate: An Efficient Way to Diversely Substituted Asymmetric Amidocyclohexenes

Chiral N‐dienyl lactams are crucial building blocks for the synthesis of complex organic compounds. However, their generation is rather challenging. This paper reports the novel one‐pot reaction of (S)‐methyl pyroglutamate as the a mide component with different a ldehydes and d ienophiles (AAD reaction) to give novel chiral 1‐amido‐2‐cyclohexenes. The corresponding N‐dienyl lactams generated in situ undergo subsequent Diels–Alder reactions in good yield and diastereoselectivity. The scope and limitations of the three‐component protocol were investigated. X‐ray and NMR spectroscopic analysis of the products as well as DFT calculations of the intermediates were also performed to explain the observed stereoselectivity and structural features.     

A SAPO-11 Silicoaluminophosphate Molecular Sieve with Stable Crystal Structure

A SAPO-11 silicoaluminophosphate molecular sieve with stable crystal structure was synthesized for the first time. After removing template by calcination, its crystal space group still retains Icm2 which the as-synthesized has. The catalyst deriving from the present SAPO-I 1 materials shows higher isomerization selectivity and higher paraffin hydroisomerization yield than those reported elsewhere.     

Acid-, base-, and lewis-acid-catalyzed heterolysis of methoxide from an alpha-hydroxy-beta-methoxy radical: models for reactions catalyzed by coenzyme B12-dependent diol dehydratase

[Reaction: see text].A model for glycol radicals was employed in laser flash photolysis kinetic studies of catalysis of the fragmentation of a methoxy group adjacent to an alpha-hydroxy radical center. Photolysis of a phenylselenylmethylcyclopropane precursor gave a cyclopropylcarbinyl radical that rapidly ring opened to the target alpha-hydroxy-beta-methoxy radical (3). Heterolysis of the methoxy group in 3 gave an enolyl radical (4a) or an enol ether radical cation (4b), depending upon pH. Radicals 4 contain a 2,2-diphenylcyclopropane reporter group, and they rapidly opened to give UV-observable diphenylalkyl radicals as the final products. No heterolysis was observed for radical 3 under neutral conditions. In basic aqueous acetonitrile solutions, specific base catalysis of the heterolysis was observed; the pK(a) of radical 3 was determined to be 12.5 from kinetic titration plots, and the ketyl radical formed by deprotonation of 3 eliminated methoxide with a rate constant of 5 x 10(7) s(-1). In the presence of carboxylic acids in acetonitrile solutions, radical 3 eliminated methanol in a general acid-catalyzed reaction, and rate constants for protonation of the methoxy group in 3 by several acids were measured. Radical 3 also reacted by fragmentation of methoxide in Lewis-acid-catalyzed heterolysis reactions; ZnBr2, Sc(OTf)3, and BF3 were found to be efficient catalysts. Catalytic rate constants for the heterolysis reactions were in the range of 3 x 10(4) to 2 x 10(6) s(-1). The Lewis-acid-catalyzed heterolysis reactions are fast enough for kinetic competence in coenzyme B12 dependent enzyme-catalyzed reactions of glycols, and Lewis-acid-catalyzed cleavages of beta-ethers in radicals might be applied in synthetic reactions.     

Long‐range π‐type hydrogen bond in dimers CH2?HF,CH2O?H2O,and CH2O?NH3

Using four basis bets, (6‐311G(d,p), 6‐31+G(d,p), 6‐31++G(2d,2p), and 6‐311++G(3df,3pd), the optimized structures with all real frequencies were obtained at the MP2 level for the dimers CH₂O? HF, CH₂O? H₂O, CH₂O? NH₃, and CH₂O? CH₄. The structures of CH₂O? HF, CH₂O? H₂O, and CH₂O? NH₃ are cycle‐shaped, which result from the larger bend of σ‐type hydrogen bonds. The bend of σ‐type H‐bond O…H? Y (Y?F, O, N) is illustrated and interpreted by an attractive interaction of a chemically intuitive π‐type hydrogen bond. The π‐type hydrogen bond is the interaction between one of the H atoms of CH₂O and lone pair(s) on the F atom in HF, the O atom in H₂O, or the N atom in NH₃. In contrast with the above three dimers, for CH₂O? CH₄, because there is not a π‐type hydrogen bond to bend its linear hydrogen bond, the structure of CH₂O? CH₄ is noncyclic shaped. The interaction energy of hydrogen bonds and the π‐type H‐bond are calculated and discussed at the CCSD (T)/6‐311++G(3df,3pd) level. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Structure and stability of endohedral X@Si20H20 complexes (X = Li, Na, K, Be, Mg, Ca)

The structure and stability of endohedral X@Si₂₀H₂₀ complexes (X = Li^0/+, Na^0/+, K^0/+, Be^0/2+, Mg^0/2+, Ca^0/2+) have been studied at the B3LYP/6-31G* level of density functional theory. It is found that complexes with X = Na^0/+, K^0/+, Mg and Ca^0/2+ are energy minimum structures with X at the cage center in I_h symmetry, while those with X = Li^0/+, Be^0/2+, Mg²⁺ have off-centered structures with X towards one pentagon face in C_5v symmetry. Large electron or charge transfer between the Si₂₀H₂₀ cage and the encapsulated X has been observed.     

Thermokinetics on the reaction of formation of Dy[(C<Subscript>5</Subscript>H<Subscript>8</Subscript>NS<Subscript>2</Subscript>)<Subscript>3</Subscript>(C<Subscript>12</Subscript>H<Subscript>8</Subscript>N<Subscript>2</Subscript>)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen?H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ?mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ?mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.