光纤热极化过程的实时测试研究

通过热极化可以使中心对称的熔石英光纤中产生二阶非线性效应和线性电光效应。为了解各热极化过程参量对热极化产生的线性电光效应的影响,利用全保偏光纤马赫一曾德尔干涉仪构造了一套光纤热极化的实时线性电光效应测试系统,并利用其进行了光纤热极化全过程的监控测试。在线测试了热极化过程的一些参量,例如极化电压、极化时间、以及极化温度等对热极化光纤中产生的线性电光效应的影响。实时测试研究表明,在光纤中施加尽可能高的极化电场将可能在光纤中产生较高的线性电光效应。对侧边抛磨光纤结构的热极化器件,考虑到器件的抗强电场击穿能力,可选用3．o～4．0kV左右的极化直流电压。当施加3．0kV左右的极化电压时,热极化优化时间约为16min,最佳热极化加热温度约为190℃。     

航天器热试验查询统计系统的设计与实现

针对航天器真空热试验数据量大、数据利用率不高的特点,提出了一种基于数据库的试验数据查询统计方法方法,以改善现有的以文件系统为主的数据存储模式;通过对试验数据格式的分析和现有工作流程的优化,将试验数据查询系统分为系统管理、试验管理、策略管理和统计分析等四个大的功能模块,利用过滤算法自动生成试验工况点信息,并通过试验工况点自动生成单次试验的统计报告,进而实现对所有试验数据的综合查询统计功能;目前系统已应用于航天器热试验任务中,经过测试,系统功能和性能指标满足试验需求,解决了实际问题。     

Material transport in dip-pen nanolithography

Dip-pen na.nolithography （DPN） is a useful method for directly printing materials on surfaces with sub-50nm resolution. Because it, involves the physical transport of materials from a scanning probe tip to a surface and the subsequent chemical interaction of that material with the surface, there are many factors to consider when attempting to understand DPN. In this review, we overview the physical and chemical processes that are known to play a role in DPN, Through a detailed review of the literature, we classify inks into three general categories based on their transport properties, and highlight the myriad ways that. DPN can be used to perform chemistry at the tip of a scanning probe.     

Removal of oxygen from silicon by electron beam melting

Small amounts of multicrystalline silicon were melted in an electron beam furnace in different experimental conditions in order to investigate the oxygen evaporation behavior during the electron beam melting (EBM) process. The oxygen content level before and after EBM was determined by secondary ion mass spectroscopy. The oxygen content was reduced from 6.177 to 1.629 ppmw when silicon was melted completely at 15 kW with removal efficiency up to 73.6 %. After that, it decreased continually to <0.0517 ppmw when the refining time exceeded 600 s with a removal efficiency of more than 99.08 %. During the melting process, the evaporation rate of silicon is 1.10 × 10^?5 kg/s. The loss of silicon could be reduced up to 1.7 % during oxygen removal process to a desirable figure, indicating EBM is an effective method to remove oxygen from silicon and decrease the loss of silicon.     

Attractive target wave patterns in complex networks consisting of excitable nodes

This review describes the investigations of oscillatory complex networks consisting of excitable nodes,focusing on the target wave patterns or say the target wave attractors.A method of dominant phase advanced driving(DPAD) is introduced to reveal the dynamic structures in the networks supporting oscillations,such as the oscillation sources and the main excitation propagation paths from the sources to the whole networks.The target center nodes and their drivers are regarded as the key nodes which can completely determine the corresponding target wave patterns.Therefore,the center(say node A) and its driver(say node B) of a target wave can be used as a label,(A,B),of the given target pattern.The label can give a clue to conveniently retrieve,suppress,and control the target waves.Statistical investigations,both theoretically from the label analysis and numerically from direct simulations of network dynamics,show that there exist huge numbers of target wave attractors in excitable complex networks if the system size is large,and all these attractors can be labeled and easily controlled based on the information given by the labels.The possible applications of the physical ideas and the mathematical methods about multiplicity and labelability of attractors to memory problems of neural networks are briefly discussed.     

板条Nd:YAG晶体的合成盘抛光技术

针对高功率板条激光器核心工作器件——板条Nd:YAG晶体的超精密加工开展研究,分析了具有特殊构型的板条Nd:YAG晶体元件的加工性能及工艺难点,提出了一种新的基于合成盘抛光的板条Nd:YAG晶体加工工艺,并对规格为100mm×30mm×3mm的板条Nd:YAG晶体进行了加工实验。实验结果表明,合成盘抛光可以很好地控制元件的塌边现象;通过磨料的优化选择,在合成盘抛光工艺中匹配合适粒度的Al2O3磨料能够实现元件的低缺陷加工,元件下盘后的全反射面平面度达0.217λ(1λ=632.8nm),端面平面度达到0.06λ,表面粗糙度达0.55nm(RMS),端面楔角精度可达2″。     

Quantum-correlated photon pair generation in tellurite microstructured optical fibers

We theoretically investigated the generation of quantum-correlated photon pair through spontaneous four-wave mixing in tellurite microstructured optical fiber (MOF). We evaluated the performance of photon pair generation in tellurite fibers based on Raman gain coefficient spectra. It was shown that the TBSN16P6W tellurite fiber provided a low Raman noise on correlation photon generation over a wide pump-idler detuning range. We can choose proper tellurite composition to obtain a low Raman gain window over wide range for correlated photon pair generation. We also designed the tellurite MOF structure to obtain a small dispersion value with high nonlinear coefficient at telecommunication wavelengths, thus realize efficient quantum-correlated photon pair generation.     

Dark pulse generation in a dispersion-managed fiber laser

We report an experimental observation of dark pulse generation in a dispersion-managed erbium-doped fiber laser with net anomalous cavity group-velocity dispersion. It is found that apart from the bright soliton pulses, dark pulses with spectral sidebands could be obtained in the laser under appropriate operating conditions. The generation of dark pulses may be attributed to soliton shaping in the cavity.     

Effects of intermodal dispersion on short pulse propagation in multi-core fibers

The effects of intermodal dispersion on ultrashort optical pulse propagation through multi-core fibers are analyzed theoretically, which has been ignored in previous studies. A three-core fiber with collinear and triangular configuration and a four-core fiber are considered. We demonstrate with numerical examples that the intermodal dispersion can cause pulse breakup effect in multi-core fibers.     

Femtosecond laser-induced microstructure in Foturan glass

We report on the microstructure formation in Foturan glass, induced by 1~kHz, 120 femtosecond laser irradiation. It is found that the line-shaped filamentation, not void array tends to be formed in this glass. This is different from our previous experimental results in fused silica and BK7 glasses. A possible mechanism Ag$^+$ captures the free electrons generated by laser, is proposed to explain the observed phenomena.