PERIODIC SOLUTIONS OF PLANAR SYSTEM WITH SIX DELAYS

In this paper we obtain some sufficient conditions for the existence of non-constant periodic solutions of the following planar system with six delaysOur approach is based on the continuation theorem of the coincidence degree.     

ASYMPTOTIC BEHAVIOR OF SOLUTIONS OF NONLINEAR DELAY DIFFERENTIAL EQUATIONS

Sufficient conditions are established for the asymptotic behavior of solutionsof nonlinear delay differential equations x′(t)+sum from i=1 to m(pi(t)x(t-т_i))=F(t,x_t),t≥0where 0<т_1<т_2<…<т_m≤r,pi∈C([0,∞)),i=1,2,…,m,F∈C([0,∞)×C_0,R).C_0=C([-r,0],R)equipped with the sup norm ||·|| forsome r>0. A new result is established, some known results are improved.     

光学孤子在色散缓变光纤中的传输特性研究

从理论上分析了超短光脉冲在色散缓变光纤中无畸变传输所要求的色散变化关系，设计了单模缓变光纤结构参数。数值模拟验证了理论分析结果，指出改变光纤色散参数完全可以克服光纤损耗对光孤子波形的畸变影响。     

三维内肋管内插入螺旋扭带的强化传热实验

本文分别以水和乙二醇为工质，在Ｒｅ数范围为：６００～４００００，Ｐｒ数范围为：５．５～１１０之间，对四根分别插入三种不同扭率螺旋扭带的三维内助管内的换热和流阻特性进行了实验研究。结果表明：三维内肋管内加装扭带的强化传热技术适用于低Ｒｅ数下高Ｐｒ数工质的管内对流换热强化。根据实验值得到了流阻和换热关联式。     

焊接自动化专业引入机器人离线编程的教学探索

机器人焊接已成为焊接自动化技术现代化的主要标志。文中通过阐述机器人离线编程系统的组成原理和主流软件，认为须在焊接自动化专业构筑起机器人离线编程的相关课程体系，才可将机器人离线编程技术引入焊接自动化专业。以此提升焊接自动化的理论和实践教学，提高学生的职业技能。     

Magnetic transition and large reversible magnetocaloric effect in EuCu1.75P2 compound

The magnetocaloric effect(MCE) in EuCu1.75P2 compound is studied by the magnetization and heat capacity measurements.Magnetization and modified Arrott plots indicate that the compound undergoes a second-order phase transition at TC ～ 51 K.A large reversible MCE is observed around TC.The values of maximum magnetic entropy change(-△SxMma) reach 5.6 J·kg-1·K-1 and 13.3 J·kg-1·K-1 for the field change of 2 T and 7 T,respectively,with no obvious hysteresis loss in the vicinity of Curie temperature.The corresponding maximum adiabatic temperature changes(△Tadmax) are evaluated to be 2.1 K and 5.0 K.The magnetic transition and the origin of large MCE in EuCu1.75P2 are also discussed.     

高质量等曲率物参光像面数字全息显微系统

对等曲率物参光像面数字全息显微成像系统进行研究,分析了光路配置方法,推导了系统的点扩散函数,并由此指出了决定系统成像分辨率的因素及系统的成像特点,最后讨论了再现像光场一次位相畸变校正的方法.结果表明,等曲率物参光像面数字全息具有最大的信息容量;该系统的成像分辨率取决于显微物镜的数值孔径和CCD的像元大小,与CCD的光敏面尺寸无关;物体各点中通过显微物镜的所有频率成分均能被系统完全记录与再现,样品被照亮区域的大小对记录条件和再现像质没有影响;等曲率物参光像面数字全息系统是一种优化的全息记录与再现系统,利用该系统可以实现高质量成像.实验结果验证了理论分析的正确性.     

二项式光场与级联三能级原子的量子纠缠

利用量子熵理论，研究了二项式光场与级联三能级原子的量子纠缠，讨论了光场与原子的初始参量对其量子纠缠性质的影响.结果表明，利用二项式光场的特性，可以揭示从相干态到数态之间的所有态光场与三能级原子相互作用时的量子纠缠性质.选择适当的系统参数可以制备稳定的光场-原子qutrit纠缠态. 关键词： 二项式光场 级联三能级原子 光场熵 量子纠缠     

Assessment of dispersion corrections in DFT calculations on large biological systems

The performance of empirical dispersion corrections in DFT calculations has been assessed for several large, genuine biological systems that include MbAB, H64L(AB), and V68N(AB) (AB?=?CO, O₂), where Mb stands for a wild-type myoglobin, H64L is the (histidine64?→?leucine) mutated myoglobin, and V68N is the (valine68?→?asparagine) mutated myoglobin. The effects of the local protein environment are accounted for by including the five nearest surrounding residues in the calculated systems and they are examined by comparing the binding energies of AB to the myoglobin and to the porphyrin (Por) without residues. Three versions of Grimme's dispersion correction methods, labeled as DFT-D1, DFT-D2, and DFT-D3, were all tested. In the first version (-D1), the dispersion correction (E_disp) is calculated only for noncovalent interactions between molecular fragments and E_disp within a covalent molecule is not calculated. For the DFT functionals, for which the calculated Por–AB binding energies are already too large, only further overestimation occurs when a dispersion correction is made. The geometry optimizations show that the DFT-D2 and DFT-D3 approaches give too short distances between the residues and the heme moiety in the myoglobins and their calculated relative binding energies ΔE_bind(myoglobin-AB/Por–AB) are in poor agreement with experiment in most cases. DFT-D1 performs very well, ensuring structural and energetic features in close agreement with experiment.