模拟退火法在吸收薄膜的椭偏反演算法中的应用

将一种广泛用于求解复杂系统优化问题的技术－－模拟退火法－－用来求解椭偏反演方程。首先假设一个薄膜模型，计算出其相应的椭偏参数（Ψ，Δ）的值，在这个计算值的基础上加入不同标准偏差的高斯噪声；然后将加入噪声后的值（Ψm,Δm)作为模拟的测量数据，采用模拟退火算法进行求解，验证得知这种方法求得的薄膜参数很接近于假设的薄膜模型参数的真值，与其他文献的报道结果一致，而且在扩大搜寻范围时，仍然可以得到准确解，从而证明了该方法的可行性以及有效性。     

差分吸收光谱法测量大气污染的测量误差分析

差分吸收光谱技术被广泛地应用于测量大气中微量元素的浓度，尽管该技术利用最小二乘法来反演待测气体的浓度，能够得到很高的测量精度。但是，由于仪器本身的噪声以及测量波段其它气体的干扰等，使得仪器的测量有一定的误差，而且上述因素还决定着仪器的测量下限。对差分吸收光谱方法的测量误差以及引起误差的原因作了详细的分析。     

激光二极管相对于铯饱和吸收D2线的无调制扰动三次谐波锁频

将频率调制加在声光调制器上 ,用三次谐波探测法获得了铯原子D2 线的三阶微分饱和光谱。采用这种激光器无调制扰动方案结合三次谐波锁频技术 ,实现了 85 2nm的分布布拉格反射器半导体激光器相对于 6S1/2 F =4- 6P3 /2 F′ =5超精细跃线的频率锁定。由锁定后的频率误差信号估算 ,10s内激光频率起伏小于± 35 0kHz ,相对频率稳定度约 1× 10 -9。这种无调制扰动方案可以消除一般的饱和吸收稳频方法中由于直接对激光器进行频率调制而带来的额外频率噪声 ;三次谐波锁频技术的应用 ,还可有效地降低铯原子饱和吸收谱中剩余多普勒背景的影响     

一种基于光纤萨尼亚克环的新型传感结构

提出了一种实现全光纤多扰动测量的基于光纤萨尼亚克环的新型传感结构。该传感结构采用新型的双萨尼亚克环结构并用波分复用技术代替了传统的双光源结构，减小了系统损耗，实现了对多扰动的位置的测量。分析了传感原理，推导了数学模型，表明测量误差与解调电路的频率响应有关，并进行了单频和多频扰动的实验研究，实验证明了理论分析的正确性。     

智能化掺铒光纤放大器

介绍一种智能化的掺铒光纤放大器(EDFA)技术.基于掺铒光纤的光放大特性与EDFA内外部工作参量(如构成EDFA的元器件参量、泵浦激光参量、输入/输出光信号参量等)的关系,采用智能化处理技术使EDFA能按照外界条件,自动地调整自身工作状态,使之符合应用系统的需要.智能化掺铒光纤放大技术可以使EDFA的应用更灵活,既可用作前置放大,也可用作功率放大或线路放大,同时还带来一些新的特点和优越性能.实验制作的智能化EDFA可以在输入信号小到-40dBm或大到+10dBm即约50dB的宽动态范围内正常工作.     

Phase transition and pitting corrosion behaviour for Mo—implanted aluminium

Molybdenum ions are implanted into aluminium with high ion flux and high dose at elevated temperatures of 200℃, 400℃ and 500℃. Due to the high temperature and high flux of vacancies and interstitial atoms, the atom diffusion and chemical effects are enhanced during the ion implantation. The effects increase with increasing ion flux and dose, so that new phase formation and phase transition emerge noticeably. X-ray diffraction analysis shows that when the aluminium is implanted with Mo ions at a low ion flux (25μA/cm²), the Al₅Mo alloy is formed. The atomic ratio of Mo/Al of the Al₅Mo phase is close to 20%. When the aluminium is implanted with Mo ions at a high ion flux (50μA/cm²), the phase transition from Al₅Mo to Al₁₂Mo appears, and the latter is dominant, which is determined to be the final phase. The ratio of Mo/Al in Al₁₂Mo is 7.7%. Rutherford backscattering spectroscopy indicates also that the Mo/Al atom ratio is ～7% to ～8% in Mo-implanted aluminium. The atomic ratios of the constituents in Al₅Mo and Al₁₂Mo are of stoichiometric composition for these alloys. The thicknesses of the Al₁₂Mo alloy layers for Mo-implanted Al with ion doses of 3×10¹⁷/cm² and 1×10¹⁸/cm² are 550nm and 2000nm, respectively. The pitting corrosion potential V_p increases obviously. It is clear that due to the formation of Al₁₂Mo alloy layer, the pitting corrosion resistance is enhanced.     

Dielectric effect on the rf characteristics of a helical groove travelling wave tube

A new type of partial-dielectric-loaded helical groove slow-wave structure (SWS) for millimetre wave travelling wave tube (TWT） is presented in this paper.The radio-frequency characteristics including the dispersion properties,the longitudinal electric field distribution and the beam-wave coupling impedance of this structure are analysed.The results show that the dispersion of the helical groove circuit is weakened,the phase velocity is reduced and the position of the maximum Ez is moved from the mouth to the inside of the groove after partially filling the dielectric materials in the helical groove SWS.Therefore,the dielectric-loaded helical groove SWS is suitable for a multi-beam TWT with broad band and high gain.     

The orientation-selective growth of LaNiO3 films on Si(100) by pulsed laser deposition using a MgO buffer

Highly (100)-oriented, (110)-oriented and polycrystalline LaNiO₃ (LNO) films were successfully prepared on Si(100) using an oriented MgO film as a buffer. It was somewhat surprising to find that that the orientation relation between the LNO film and the corresponding MgO buffer was: LNO(100)\MgO(110), LNO(110)\MgO(111) and LNO(polycrystalline)\MgO(100). The crystalline quality of the LNO films was shown to be sensitive to the preparation conditions of the MgO buffer. The film surface was very smooth, without micrometer-sized droplets being observed. All LNO films were of metallic conductivity, with a room-temperature resistivities of approximately 250, 280 and 420 μΩ cm for the (110)-oriented, (100)-oriented and polycrystalline LNO, respectively. Received: 2 April 2001 / Accepted: 23 October 2001 / Published online: 3 June 2002     

Interference of transverse rings in multifilamentation of powerful femtosecond laser pulses in air

We observe multiple filaments and interference of their ring structures in the propagation of 14 mJ, 45 fs infrared laser pulse in air. We suggest a simple physical model describing the formation and the interference of rings as the result of superposition of the background field of the whole beam and the fields that diverge from the filaments due to the defocusing in the laser-produced plasma. The size and the number of maxima in the interference pattern depend on the position of the filament formation along the direction of propagation. The simulated picture of the ring structure interference is in qualitative agreement with the one obtained from the experiment.     

偏硅酸钙中Pr3+的4f5d态的光谱特性及Pr3+→Gd3+的能量传递

合成了高效发射UV光的CaSiO3:Pr^3 新型荧光体，研究了室温下Pr^3 的4f5d态的发射和激发光谱，Pr^3 的4f5d态的最低子能级向4f^2组态的^3H4，^3H6和^1G4能级跃迁产生UV发射，并不伴随有4f-4f能级跃迁的可见光发射。Pr^3 的浓度猝灭是由于辐射和无辐射能量传递造成的，同时，在CaSiO3中，存在Pr^3 →Cd^3 的能量传递，探讨了其能量传递特性。