Red top-emitting organic light-emitting device with improved efficiency and saturated color

In this work, characteristics of microcavity top-emitting red organic light-emitting device (TEROLED) having metallic electrodes had been examined. The TEOLED shows the higher efficiency in comparison with that of the bottom OLED. However, color variation with the increasing view angles is also observed. For the purpose of diminishing the blue-shift of resonant wavelength (RW) in the device with increasing view angle, the effect of out-coupling layer on the emission properties of the TEOLED is discussed in detail. Finally, the out-coupling layer was introduced in theory without sacrificing the efficiency through precise optical simulation.     

介质部分填充平行平板传输线微放电过程分析

本文主要研究了介质填充微波部件微放电随时间演变的过程,重点分析了介质微波部件微放电自熄灭机理.以介质部分填充平行平板传输线为研究对象,忽略空间电荷效应,采用自主研发粒子模拟软件模拟微放电过程,并将模拟结果与金属微波部件结果进行对比.结果表明,在一定功率下,金属微放电过程中电子数目呈指数形式增长,而介质微放电过程经历初始电子倍增后发生自熄灭现象,同时发现在电子数目即将下降为0时,介质表面的平均二次电子发射系数大于1或约等于1.另外,在上述模拟结果的基础上对微放电过程中介质表面积累电荷问题进一步分析,模拟结果表明,如果持续向微波部件内注入电子,介质表面的平均二次电子发射系数最终都约等于1.所得结论对研究复杂介质填充微波部件微放电的机理具有一定的理论指导价值.     

Growth of SnO2 nanoparticles via thermal evaporation method

Tin oxide (SnO₂) nanoparticles were fabricated by evaporation of Sn powers at 1000 °C in air pressure. The as-deposited SnO₂ particles were single crystal structure, which were mostly spherical shape, the diameter of particles was ranging from 200 to 600 nm. The photoluminescence (PL) spectrum showed that a sharp emission peak at around 393 nm with the excitation wavelength at 325 nm, which suggested possible applications in nanoscaled optoelectronic devices. It was also found that the holding time affects the morphology of the products. The formation mechanism of SnO₂ particles was discussed.     

Compact finite difference schemes of the time fractional Black-Scholes model

In this paper, three compact difference schemes for the time-fractional Black-Scholes model governing European option pricing are presented. Firstly, in order to obtain the fourth-order accuracy in space by applying the Pad\''{e} approximation, we eliminate the convection term of the B-S equation by an exponential transformation. Then the time fractional derivative is approximated by $L1$ formula, $L2 - 1_\sigma$ formula and $L1 - 2$ formula respectively, and three compact difference schemes with oders $O(\Delta t^{2-\alpha}+h ^4)$, $O(\Delta t^{2}+h ^4)$ and $O(\Delta t^{3-\alpha}+h ^4)$ are constructed. Finally, numerical example is carried out to verify the accuracy and effectiveness of proposed methods, and the comparisons of various schemes are given. The paper also provides numerical studies including the effect of fractional orders and the effect of different parameters on option price in time-fractional B-S model.     

Modification of bonding properties and microstructure of resin-cement interface by coupling agents

To solve the problem of organic-inorganic light conductive composite interface features, transparent resin and cement matrix were used as carriers to further study features of the organic-inorganic interface formed by transparent resin and cement matrix and the interface modification of the coupling agent. The bond strength, micro-hardness, microstructure and surface morphology of a resin light conductive cementitious materials (RLCCM) interface were evaluated by tests of tensile and oblique shear, micro-hardness, environmental scanning electron microscopy, and atomic force microscope. The results show that the silane A-151 and aluminate coupling agent could significantly improve interface bond properties of RLCCM. At 7 d, the interface tensile bond strength of the silane A-151 and aluminate coupling agent increased by 117 and 105%, respectively. At 28 d, strength on average increased by 73%. At 7 d, interface shear strength the silane A-151 and aluminate coupling agent of 45° increased by 43 and 53%, respectively, At 28 d, strength on average increased by 40%. The transparent resin performance weakened region thickness up to 100 μm; the hardness of the transparent resin in the transition region was increased by 19.6 and 39.9%, respectively. Silane coupling agent A-151 and cement hydration products formed flat spherical particles with diameter of approximately 78 nm, and these particles mosaicked and fused in the surface of the hydrate; therefore, the surface became denser and smoother.     

Efficient generation of a photon pair in a bulk periodically poled potassium titanyl phosphate

In this report, we demonstrate the efficient generation of collinearly propagating photon pairs in a bulk periodically poled potassium titanyl phosphate pumped by a cw laser. The detected coincidence counts are more than 7400/s with 3.58 mW pump power in a Hanbury-Brown-Twiss-type experiment. The estimated photon pair production rate is about 0.73 MHz/mW. This is very promising for some applications, such as quantum key distribution, proof of the Bell-inequality, preparation of single photon states in broadband wave packets, Franson-type interference and so on.     

Experimental demonstration of improved neoclassical transport with quasihelical symmetry

Differences in the electron particle and thermal transport are reported between plasmas produced in a quasihelically symmetric (QHS) magnetic field and a configuration with the symmetry broken. The thermal diffusivity is reduced in the QHS configuration, resulting in higher electron temperatures than in the nonsymmetric configuration for a fixed power input. The density profile in QHS plasmas is centrally peaked, and in the nonsymmetric configuration the core density profile is hollow. The hollow profile is due to neoclassical thermodiffusion, which is reduced in the QHS configuration.     

Magnetic characterization of dual phase FeZrB soft magnetic alloy

The magnetic properties and the annealing process of Fe₇₈Zr₇B₁₅ amorphous ribbons are investigated by X-ray diffraction (XRD), differential scanning calorimetry, and vibrating sample magnetometer. The fully amorphous structure of the as-quenched ribbons is confirmed by the XRD pattern. The Curie temperature and the saturation magnetization M_s of the ribbons are 305 °C and 124.3 emu/g, respectively. Annealing at 550 °C can result in an increase in M_s with annealing time due to the increasing crystallized volume fraction of α-Fe phase. The optimized annealing process is established at 550 °C for 20-30 min with maximum M_s of 146.6 emu/g. The morphology of the ribbons annealed at 550 °C is observed by scanning electron microscopy, showing that nanocrystalline α-Fe grains are dispersed in an amorphous matrix.     

The electronic transport properties in C60 molecular devices with different contact distances

By applying non-equilibrium Green?s functions in combination with the density-functional theory, we investigate the transport behavior of molecular devices composed by metal electrode-C₆₀ molecule-metal electrode. Our results show that the electronic transport properties are affected obviously by the different contact distances between the electrodes, and the tunneling current decreases approximately exponentially at a certain bias with the increasing of contact distances. The negative differential resistance is observed and the peak-to-valley ratio can be tuned by different contact distances. The mechanisms of the contact distance effect and the negative differential resistance behavior are proposed.