Controllable synthesis of high aspect ratio Mg_2B_2O_5 nanowires and their applications in reinforced polyhydroxyalkanoate composites

Highly pure magnesium borate （Mg2B2O5） nanowires with an average diameter of - 30 nm, an average length of 15 μm, and a high aspect ratio of - 500 have been synthesized on a large scale via a two-step method. MgBO2（OH） nanowires with high aspect ratios were first prepared via a PVP-assisted hydrothermal technique. Using these nanowires as precursors, single crystalline Mg2B205 nanowires were synthesized by post-annealing treatment at a relatively low temperature of 700 ℃. The important effect of the MgBO2（OH）-Mg2B2O5 conversion process on the morphology of the Mg2B2O5 nanowires was investigated and it was indicated that the recrystallization process plays an important role in the protection of the one-dimensional （1D） nanostructure. Moreover, the rigidity and the toughness of the Mg2B2O5 nanowire- reinforced PHA composites were tremendously improved compared to those of the pure PHA. Our results demonstrate the effectiveness of Mg2B2O5 nanowires for reinforcement applications in polymer composites.     

Nonequilibrium thermodynamics and fluctuation relations for small systems

In this review, we give a retrospect of the recent progress in nonequilibrium statistical mechanics and thermodynamics in small dynamical systems. For systems with only a few number of particles, fluctuations and nonlinearity become significant and contribute to the nonequilibrium behaviors of the systems, hence the statistical properties and thermodynamics should be carefully studied. We review recent developments of this topic by starting from the Gallavotti–Cohen fluctuation theorem, and then to the Evans–Searles transient fluctuation theorem, Jarzynski free-energy equality, and the Crooks fluctuation relation. We also investigate the nonequilibrium free energy theorem for trajectories involving changes of the heat bath temperature and propose a generalized free-energy relation. It should be noticed that the non-Markovian property of the heat bath may lead to the violation of the free-energy relation.     

A new solution of reducing polymer optical fiber losses

Polymethyl methacrylate (PMMA) is one of the most commonly used optical materials. However, the application of it in the area of optical communication is strongly limited by the intrinsic absorption loss of carbon-hydrogen stretching vibration. In this paper, we present a method to solve the problem by adopting the hollow-core fibers with cobweb cladding structure. The fibers use a single dielectric material and may solve the problem of structural support. Thus the feasibility of the “OmniGuide” fibers is improved, while a series of advantages of the “OmniGuide” hollow-core fiber are retained. It is promising that a fiber with low transmission loss, high bandwidth, large-core, and low costs can be designed and fabricated using PMMA. At the same time, a very broad range of the wavelengths (from visible to near infrared region, for instance, wavelengths at 0.65-1.12 μm, and even 1.30 μm, 1.54 μm and their neighbors) may be adopted for signal wavelength.     

Enhancement of coercivity with reduced grain size in CoCrPt film grown by pulsed laser deposition

We report a pulsed laser deposition (PLD) growth of VMn/CoCrPt bilayer with a magnetic coercivity (H_c) of 2.2 kOe and a grain size of 12 nm. The effects of VMn underlayer on magnetic properties of CoCrPt layer were studied. The coercivity, H_c, and squareness, S, of VMn/CoCrPt bilayer, is dependent on the thickness of VMn. The grain size of the CoCrPt film can also be modified by laser parameters. High laser fluence used for CoCrPt deposition produces a smaller grain size. Enhanced H_c and reduced grain size in VMn/CoCrPt is explained by more pronounced surface phase segregation during deposition at high laser fluence.     

Hydrothermal Preparation of Photoluminescent Graphene Quantum Dots Characterized Excitation‐Independent Emission and its Application as a Bioimaging Reagent

Zero‐dimensional photoluminescent (PL) graphene quantum dots (GQDs) that can be used as the cell‐imaging reagent are prepared by a hydrothermal route using the graphene oxide (GO) as the carbon source. Under the optimized hydrothermal conditions, an initial hydrogen peroxide concentration of 0.5 mg mL^?1 at 180 °C for 120 min, the GO sheets can be cut into nanocrystals with lateral dimensions in the range of 1.5–5.5 nm and an average thickness of around 1.1 nm. The as‐prepared GQDs exhibit an abundance of hydrophilic hydroxy and carboxyl groups and emit bright blue luminescence with up‐conversion properties in a water solution at neutral pH. Most interestingly, they indicate excitation‐independent emission characteristics, and the surface state is demonstrated to have a key role in the PL properties. The fluorescence quantum yield of the GQDs is tested to be around 6.99% using quinine sulfate as a standard. In addition, the as‐prepared GQDs can enter into HeLa cells easily as a fluorescent imaging reagent without any further functionalization, indicating they are aqueous stability, biocompatibility, and promising for potential applications in biolabeling and solution state optoelectronics.     

掺CdSxSe1-x玻璃波导分布反馈光学双稳器件

本文给出了掺CdS_xSe_1-x玻璃平面波导分布反馈(DFB)光学双稳器件的设计和制备方法,实现了低功耗、快速的本征光学双稳。     

Application of the first collision source method to CSNS target station shielding calculation

Ray effects are an inherent problem of the discrete ordinates method. RAY3 D, a functional module of ARES, which is a discrete ordinates code system, employs a semi-analytic first collision source method to mitigate ray effects. This method decomposes the flux into uncollided and collided components, and then calculates them with an analytical method and discrete ordinates method respectively. In this article, RAY3 D is validated by the Kobayashi benchmarks and applied to the neutron beamline shielding problem of China Spallation Neutron Source(CSNS)target station. The numerical results of the Kobayashi benchmarks indicate that the solutions of DONTRAN3 D with RAY3 D agree well with the Monte Carlo solutions. The dose rate at the end of the neutron beamline is less than10.83 μSv/h in the CSNS target station neutron beamline shutter model. RAY3 D can effectively mitigate the ray effects and obtain relatively reasonable results.     

5 TW/40 fs级台式钛宝石激光系统研究

在TSA-25系统输出35 mJ,800 nm啁啾脉冲的基础上,建立了以钛宝石作为增益介质的二级啁啾脉冲放大(CPA)系统。使用0.6 J和1.6 J,532 nm,10 Hz Nd∶YAG激光抽运,输出脉冲能量达到500 mJ,经压缩脉冲宽度为41 fs,压缩器的能量转换效率为63%,峰值功率可达7.6 TW。通过对放大器系统的钛宝石晶体、抽运密度以及多通结构通道数的选择等实验,有效地提高了能量放大器的萃取效率。其主放大器能量萃取效率达到32%,整个系统占用尺寸不到10 m2。     

The electron transport characters in a nanostructure with the periodic magnetic-electric barriers

This paper detailedly studies the transmission probability, the spin polarization and the conductance of the ballistic electron in a nanostructure with the periodic magnetic-electric barriers. These observable quantities are found to be strongly dependent not only on the magnetic configuration, the incident electron energy and the incident wave vector, but also on the number of the periodic magnetic-electric barriers. The transmission coefficient and the spin polarization show a periodic pattern with the increase of the separation between two adjacent magnetic fields, and the resonance splitting increases as the number of periods increases. Surprisingly, it is found that a polarization can be achieved by spin-dependent resonant tunnelling in this structure, although the average magnetic field of the structure is zero.     

二步法大景深反射全息图

以开拓反射全息图的景深表达能力为目的,从反射全息图的共轭物像关系出发,利用反射全息图的均匀介质耦合波理论和布拉格条件,对其白光再现像模糊作了具体的分析和讨论,得到色模糊和线模糊的表达式.指出反射全息图上不同各点对任意白光再现像点的色模糊和线迷糊的影响均存在差异,给出反射全息图白光再现像的景深表达式.实验利用二步法制作了一张景深为83 cm的反射全息图,与大景深彩虹全息图再现像相比,其再现像的立体感更加强烈.理论分析和实验结果表明,光源的再现角度和观察距离对反射全息图的再现像景深大小影响显著.在再现光垂直于反射全息图平面照明情况下,反射全息图具有最好的景深表达能力.