Analysis of functional groups on the surface of plasma-treated carbon nanofibers

Plasma chemically modified carbon nanofibers were characterized by X-ray photoelectron spectroscopy with regard to the content of carbon, oxygen, and nitrogen and the contribution of carboxylic groups or ester, carbonyl and hydroxylic groups or ether on the surface. Unfortunately, X-ray photoelectron spectroscopy only provides an average value of the first 10 to 15 molecular layers. For comparison, depth profiles were measured and wet chemical methods were applied to estimate the thickness of the functionalized layer and the distribution of oxygen-containing functional groups within the near-surface layers. The results indicate that the fiber surface is covered by a monomolecular oxygen-containing layer and that plasma treatment allows a complete oxygen functionalization of the uppermost surface layer. The best conditions for plasma treatment found within the set of parameters applied to generate complete functionalization are: plasma gas O(2)/Ar ratio 1:1, gas pressure 1-1.5 hPa, plasma power 80 W, treatment time >or= 5 min. Additionally, three quick and easy methods are presented to estimate the efficiency of plasma treatment with regard to surface functionalization: pyrolysis, contact angle measurements, and light permeability measurements of aqueous carbon nanofiber suspensions.     

Novel photopolymerizable biodegradable triblock polymers for tissue engineering scaffolds: synthesis and characterization

For use in micro-patterned scaffolds in tissue engineering, novel diacrylated triblock macromers (PLA-b-PCL-b-PLA, PGA-b-PCL-b-PGA and PCL-b-PEO-b-PCL) were synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). All diacrylated polymers were designed as triblock copolymers and involved biodegradable blocks of relatively non-polar epsilon-caprolactone (CL) and polar monomers such as glycolide (GA), lactide (LA) or ethylene oxide (EO). All triblock polymers were prepared in molecular weights of a few kilo daltons via the anionic ring-opening polymerization (ROP) of the corresponding lactide, glycolide or caprolactone using stannous octoate [Sn(Oct)(2)] as catalyst. The polymers had low polydispersity indices, ranging from 1.23 to 1.56. Biodegradable polymeric networks were prepared with conversions of 72-84% via photopolymerization of the triblock diacrylated polymers with 2,2-dimethoxy-2-phenylacetophenone (DMPA) as photoinitiator. PLA-b-PCL-b-PLA copolymers crumbled easily and were not suitable for micro-patterning. PGA-b-PCL-b-PGA copolymers had higher water contact angles than PCL-b-PEO-b-PCL and were also cytocompatible with Fibroblasts 3T3.     

Preliminary study on dual fluorescence behavior of porphyrin

It is well known that porphyrin derivatives play a key role in the primary process of photo-synthesis[1], in which porphyrins directly absorb the sunlight or indirectly acquire excitation en-ergy from light-harvesting antenna system to reach their excited state, and then donate electrons to quinone acceptors to yield a series of charge-separated species. In general, only first singlet ex-cited state of porphyrins is involved in energy transfer process[2]. However, highly excited state (S2 stat…     

稀土掺杂的(K, Sr)Cl·SiO2复合凝胶的荧光性能

采用sol gel法制备了单掺铕及共掺铕、铈的(K,Sr)Cl·SiO2复合凝胶,研究了复合凝胶的荧光性能。根据荧光测试结果,复合凝胶中,Eu3+在没有还原剂的作用下,可以与基质作用形成还原态的Eu2+,复合凝胶表现出相应的Eu2+荧光性能;研究认为,Ce3+,Eu3+共掺杂时,复合凝胶激发光谱与发射光谱峰位基本不变,但强度有所不同。330nm处的激发光谱明显增强,且发射光谱随Ce3+的掺杂量增加而增强。当Ce3+掺杂浓度为3.0%(原子分数)时,复合凝胶具有最大的荧光发射强度,表明Ce3+具有很好的敏化作用。在Ce3+,Eu3+共掺杂复合凝胶体系中,复合凝胶荧光强度增大的原因既可能是电子转移过程,也可能是Ce3+→Eu2+的能量传递过程所致。     

Enantioselective iodolactonization catalyzed by chiral quaternary ammonium salts derived from cinchonidine

Chiral quaternary ammonium salts derived from cinchonidine have been applied to catalyze the stereoselective iodolactonizations of trans-5-aryl-4-pentenoic acids leading to a mixture of two regioselectively iodolactonized products with fair to excellent yield (37-98%) and moderate enantioselectivity (exo = 42.0% ee, endo = 31.0% ee) under mild conditions. This work is the first example of asymmetric iodolactonization reaction in the presence of less than a stoichiometric amount of chiral reagent.     

周岁内幼儿头发中锌钙含量的动态分析

对合肥市16671名1－12个月幼儿的发锌，钙含量进行了测定，并对测定值进行了统计分析。结果表明，锌，钙的含量随着月龄的增加呈直线递减。并给出了发锌，钙含量的趋势线方程，丰富了目前文献给出的发锌，钙的标准值，为及时准确判断周岁内幼儿微量元素锌，钙缺乏程度提出依据。     

Über die thermischen Eigenschaften von Heteropolysäuren des Typs H3+n[PVnMo12−nO40] · x H2O (n = 0, 1, 2, 3) II. Raman- und IR-spektroskopische Untersuchungen

On the Thermal Behaviour of Heteropoly Acids of the Type H_3+n[PV_nMo_12?nO₄₀] · x H₂O (n = 0, 1, 2, 3). II. Raman and Infrared Spectroscopic Investigations The investigation of de- and rehydratization of the heteropoly acids H_3+n[PV_nMo_12?nO₄₀] · x H₂O (n = 0, 1, 2, 3) shows typical changes in the region of valence and bridging vibrations in the Raman and infrared spectra, in particular during the existence of ?anhydrous”? forms. The time dependence of rehydratization is also demonstrated well with a special Raman sample technique.     

水相法合成二氯二甲茂钛与水杨酸类配合物

Ｃｐ2 ＴｉＣｌ2 具有很好的抗癌活性 ,已成为第三代抗癌药物[1 - 3] 。为了寻求活性更高的抗癌药物 ,探索抗癌机理 ,我们用 (ＭｅＣｐ) 2 ＴｉＣｌ2 、水杨酸或其衍生物 ,按水相法合成了甲茂钛的水杨酸类配合物。合成路线如下图所示 :其中 :Ⅰ为ｐＨ <4 ,Ｘ =Ｈ ,Ｙ =Ｈ的产物 ;Ⅱ为ｐＨ <4 ,Ｘ =Ｈ ,Ｙ =ＮＯ2 的产物 ;Ⅲ为ｐＨ >6 ,Ｘ =ＮＯ2 ,Ｙ =ＮＯ2 ,Ｚ =Ｏ的产物 ;Ⅳ为ｐＨ >6 ,Ｘ =Ｈ ,Ｙ =Ｈ ,Ｚ =Ｓ的产物。 (Ⅰ～Ⅳ为新化合物 )1　实验部分1 .1　仪器与试剂水杨酸、ＴｉＣｌ4,ＡＲ ;5 -硝基水杨酸、3,5 -二硝基水杨酸、5 -磺基…     

Rapid—In—situ Determination of Chromium （VI） in Water Using Modified Diphenylcarbazine with Citrate

In recent years, the determination of Cr (VI) has attracted great attention because of its toxicity to human, plants and animals1-5. Usually, in the industrial waste water, the concentration of Cr (VI) is relatively high and should be determined frequently. So, an accurate, quick, and convenient method for the measurement of Cr (VI) in environmental water, as well as in river, lake, sea and tap water, is of great importance. The method for determination of Cr (VI) by diphenylcarbazine …     

碳纳米管电极超大容量离子电容器交流阻抗特性

采用碳纳米管作为超大容量离子电容器的电极材料,应用交流阻抗频谱法,研究了超大容量离子电容器的频率响应特性.结果表明,用碳纳米管块作电极,超大容量离子电容器在频率250 mHz以下出现“电荷饱和”；而用活性炭块作电极, 超大容量离子电容器在频率为100 mHz时仍未出现“电荷饱和”,这说明碳纳米管电极超大容量离子电容器的频率响应特性优于活性炭电极超大容量离子电容器的频率响应特性.上述两类超大容量离子电容器的阻抗谱中均出现倾角约为45°的直线段,其相位角均远小于理想电容器的相位角90°.