Bio-based films were prepared from LiCl/DMAc solutions containing sisal cellulose esters (acetates, butyrates and hexanoates) with different degrees of substitution (DS 0.7–1.8) and solutions prepared with the cellulose esters and 20 wt% sisal cellulose. A novel approach for characterizing the surface morphology utilized field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS) and contact angle analysis. XPS and ToF-SIMS were a powerful combination while investigating both the ester group distribution on the surface and effects of cellulose content on the film. The surface coverage by ester aliphatic chains was estimated using XPS measurements. Fibrous structures were observed in the FE-SEM images of the cellulose and bio-based films, most likely because the sisal cellulose chains aggregated during dissolution in LiCl/DMAc. Therefore, the cellulose aggregates remained after the formation of the films and removal of the solvent. The XPS results indicated that the cellulose loading on the longer chain cellulose esters films (DS 1.8) increased the surface coverage by ester aliphatic chains (8.2 % for butyrate and 45 % for hexanoate). However, for the shortest ester chains, the surface coverage decreased (acetate, 42 %). The ToF-SIMS analyses of cellulose acetate and cellulose hexanoate films (DS 1.8) revealed that the cellulose ester groups were evenly distributed across the surface of the films. 相似文献
An anaerobic sequencing batch reactor containing immobilized biomass (AnSBBR) was used to produce biomethane by treating the effluent from another AnSBBR used to produce biohydrogen from glucose- (AR-EPHG) and sucrose-based (AR-EPHS) wastewater. In addition, biomethane was also produced from sucrose-based synthetic wastewater (AR-S) in a single AnSBBR to compare the performance of biomethane production in two steps (acidogenic and methanogenic) in relation to a one-step operation. The system was operated at 30 °C and at a fixed stirring rate of 300 rpm. For AR-EPHS treatment, concentrations were 1,000, 2,000, 3,000, and 4,000 mg chemical oxygen demand?(COD)?L?1 and cycle lengths were 6 and 8 h. The applied volumetric organic loads were 2.15, 4.74, 5.44, and 8.22 g COD L?1 day?1. For AR-EPHG treatment, concentration of 4,000 mg COD L?1 and 4-h cycle length (7.21 g COD L?1 day?1) were used. For AR-S treatment, concentration was 4,000 mg COD L?1 day?1 and cycle lengths were 8 (7.04 g COD L?1 day?1) and 12 h (4.76 g COD L?1 day?1). The condition of 8.22 g COD L?1 day?1 (AR-EPHS) showed the best performance with respect to the following parameters: applied volumetric organic load of 7.56 g COD L?1 day?1, yield between produced methane and removed organic material of 0.016 mol CH4?g COD?1, CH4 content in the produced biogas of 85 %, and molar methane productivity of 127.9 mol CH4?m?3 day?1. In addition, a kinetic study of the process confirmed the trend that, depending on the biodegradability characteristics of the wastewaters used, the two-step treatment (acidogenic for biohydrogen production and methanogenic for biomethane production) has potential advantages over the single-step process. 相似文献
We extend our previous model taking into account a possible autoacceleration mechanism of electrochemical processes. It is supposed that protons generated in an electrochemical oxidation of ascorbate are responsible for an increase of electric conductivity of polyaniline. Accordingly, the current–time profiles have been calculated taking into account a “threshold” value for proton concentration to increase the electric conductivity of polyaniline by one or more orders of magnitude. Different kinds of corresponding profiles, including ones with a sigmoid character and possessing sharp current flashes as well, were obtained and analyzed. 相似文献
Mullite is an aluminosilicate widely used as a structural material for high temperature applications. This paper studies the effect of the gelation temperature on the synthesis of two mullite precursors: polymeric and colloidal silica, using both in fully-hydrolyzed silica sol, derived from sodium silicate. The gels were synthesized using aqueous silicic acid and aluminum nitrate. Ethylene glycol was added into polymeric gels. Two gelation temperatures were used: 80 and 100 °C. In the polymeric precursor, the increasing of the gelation temperature caused an increase in the silica incorporation inside the mullite crystalline lattice at 1,000 °C, and it also generated an increase in the reaction extent at all calcination temperatures. In the colloidal precursors, these effects were more intense than in the polymeric precursors in terms of yield. Colloidal samples calcined at 1,250 °C crystallized cristobalite and alpha alumina in addition to mullite when they were previously gelled at 80 °C. On the other hand, the same sample gelled at 100 °C led to only crystallized mullite. The reaction extent increased by more than 20 % for colloidal samples gelled at 100 °C compared to colloidal samples gelled at 80 °C (calcined at 1,250 °C). This increase was due to the almost total incorporation of alumina and silica in the crystalline lattice of mullite. 相似文献
Photodynamic procedures have been used in many applications, ranging from cancer treatment to microorganism inactivation. Photodynamic reactions start with the activation of a photosensitizing molecule with light, leading to the production of cytotoxic molecules that promote cell death. However, establishing the correct light and photosensitizer dosimetry for a broadband light source remains challenging. In this study, we proposed a theoretical mathematical model for the photodegradation of protoporphyrin IX (PpIX), when irradiated by multi-wavelength light sources. The theoretical model predicts the experimental photobleaching (temporal change in PpIX concentration) of PpIX for different light sources. We showed that photobleaching occurs independently of the light source wavelengths but instead depends only on the number of absorbed photons. The model presented here can be used as an important mathematical approach to better understand current photodynamic therapy protocols and help achieve optimization of the doses delivered. 相似文献
Multi-reference configuration interaction, MR-CI (including extensivity corrections, named +Q), calculations were performed on the S0–S3 states of cyclohexa-2,4-diene-1-thione (thione 24 ) and cyclohexa-2,5-diene-1-thione (thione 25 ), which are thione isomers of thiophenol. Several types of uncontracted MR-CIS and MR-CISD wavefunctions were employed, comprising MR-CI expansions as large as ~365 × 106 configuration state functions. The nature of the studied excited states was characterized. Vertical excitation energies (ΔE) and oscillator strengths (f) were computed. The most intense transitions (S0 → S2 for 24 and S0 → S3 for 25 ) did not change with the wavefunction, although a variation as large as ~1 eV was obtained for the S3 state of 24 , at the highest (MR-CI+Q) level. On the other hand, ΔE changed at most by ~0.56 eV for 25 as the wavefunction changes, at the same level. The S1 state of both thiones was found to have nπ* character and is in the visible region. For 24 , S2 and S3 are ππ* and nπ* states, respectively, while for 25 the reverse order is obtained. S2 and S3 are in the range ~3.5 to 5.2 eV, again at the highest level. It is the first time that the excited states of the title molecules are studied. The computed results agree with the experimental onset of photoreactions of thiones 24 and 25 found by Reva et al (Phys. Chem. Chem. Phys., 2015 , 17, 4888). 相似文献
N-tosyl-2- and N-tosyl-4-halogen-substituted derivatives of 2-(1-methylbut-2-en-1-yl)aniline were synthesized and their molecular iodine-mediated cyclization was investigated. The cyclization upon interaction of N-tosyl-6-methyl-2-(1-methylbut-2-en-1-yl)aniline with molecular iodine in methyl tert-butyl ether or acetonitrile was studied, as well as the interaction of this sulfonamide with N-bromosucinimide in dichloromethane. Synthesized (2R*,3R*)- and (2R*,3S*)-N-arylsulfonyl-2-(1-halogenoethyl)-3-methylindoline derivatives showed cytotoxic activity against HEK293 cells, SH-SY5Y, Jurkat, and HepG2 cell lines. The compounds (2R*,3S*)-N-arylsulfonyl-7-bromo-2-(1-halogenoethyl)-3-methylindoline cis- 4a , stereoisomeric (2R*,3R*)-trans- 4h and (2R*,3S*)-N-tosyl-7-chloro-2-(1-halogenoethyl)-3-methylindoline cis- 4h demonstrated selective toxicity against SH-SY5Y cell line (IC50 ≈ 3 ÷ 5 μM), and did not affect HEK293, Jurkat, and HepG2 cells. 相似文献
Many studies are focused on the development of materials for converting carbon dioxide into multicarbon oxygenates such as methanol and ethanol, because of their higher energy density and wider applicability. In this work, TiO2 nanotubes (NT/TiO2) were modified with CuxO nanoparticles in order to investigate the contribution of different ratio of Cu2O/CuO and its distribution over NT/TiO2 for CO2 photoelectro-conversion to methanol. The photoelectrodes were built by anodization process to obtain NT/TiO2 layer, and the decoration with CuxO hybrid system was carried out by electrodeposition process, using Na2SO4 or acid lactic as electrolyte, followed by annealing at different temperatures. X-ray photoelectron spectroscopy analysis revealed the predominance of Cu+1 and Cu+2 at 150 °C and 300 °C, respectively. X-ray diffraction and scanning electron microscopy indicated that under lactic acid solution, the oxide nanoparticles exhibited small size, cubic shape, and uniform distribution on the nanotube wall. While under Na2SO4 electrolyte, large nanoparticles with two different morphologies, octahedral and cubic shapes, were deposited on the top of the nanotubes. All modified electrodes converted CO2 in methanol in different quantities, identified by gas chromatograph. However, the NT/TiO2 modified with CuO/Cu2O (80:20) nanoparticles using lactic acid as electrolyte showed better performance in the CO2 reduction to methanol (0.11 mmol L−1) in relation to the other electrodes. In all cases, a blend among the structures and nanoparticle morphologies were achieved and essential to create new site of reactions what improved the use of light irradiation, minimization of charge recombination rate and promoted high selectivity of products.