Diffraction techniques for nonlamellar phases of phospholipids

A neutron diffraction method applicable to nonlamellar phases of substrate-supported lipid membranes is described and validated. When prepared on a flat substrate, the resulting nonlamellar phases have layered symmetry which provides some advantages over powder diffraction for detailed structure determination. This approach recently led to the detection of a rhombohedral phase and a distorted hexagonal phase of lipids. Here the determination of intensity and phase information for such phases is demonstrated by application to the hexagonal phase of diphytanoyl phosphatidylcholine (DPhPC). The hexagonal symmetry is used to verify the data reduction procedure for the intensities of the diffraction peaks. Diffraction intensities measured while varying the D2O/H2O ratio in the relative humidity was used to solve the phase problem. The neutron scattering length density distribution of the hexagonal phase was constructed and analyzed to elucidate the packing of the lipid molecules. The structure of DPhPC in the hexagonal phase is of interest in connection with its stalk structure in the rhombohedral phase. We also found that the incorporation of tetradecane into the DPhPC hexagonal phase is limited, similar to the case for dioleoyl phosphatidylethanolamine.     

低压催化氚化亮石松碱的定位效应的研究

近年来,中草药有效成分的研究引起国内外有关学者普遍关注。氚标记中草药有效成分是研究其相应的药代动力学和代谢产物的主要手段,它具有操作简便,条件温和等优点,但是一般氚化方法均不能明确给出氚化位置。而研究氚化定位效应又是药理工作者急待解决的重要课题,所以在很大程度上限制了该项技术的使用范围。最近,郑冬珠等人用FX—100型核磁共振谱仪给出了在PdO催化剂存在条件下,低压氚化亮石松碱的氚化位置及其相对含量。本文在前文基础上,以亮石松碱为底物,根据Fraser和Garnett等人提出的氢—氚同位素交换反应动力学理论,采用CNDO/2法,对PdO催化亮石松碱的立体构型讲行了计算,得出一些有意义的结果。     

压缩X因子导数光谱法测定痕量锗

本采用压缩Ｘ因子导数光谱技术实现了宽峰体系灵敏度的大幅度提高，提出了测定痕量锗的方法。在０．７２ｍｏｌ／ＬＨ２ＳＯ４和３．０ｍｏｌ／ＬＨ３ＰＯ４的混酸介质中，锗－水杨基荧光酮－ＯＰ三元显色体系的压缩Ｘ因子四阶导数光谱摩尔响应系数达１．８９×１０＾６Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，灵敏度比常规光度法高１２．４倍；最低检测出限为０．０００３３ｍｇ／Ｌ，比常规光谱法低４倍；选择性也进一步提高，绝大多数离     

Thermosensitive polymeric vesicles self-assembled by PNIPAAm-b-PPG-b-PNIPAAm triblock copolymers

PNIPAAm-b-PPG-b-PNIPAAm triblock copolymers were prepared by redox polymerization. The self-assembly behavior and thermosensitive property of the copolymers in water were studied using ¹H-NMR, TEM and a UV spectrophotometer. The results showed that the LCST of the copolymers was 32 °C, which was consistent with that of pure PNIPAAm. The copolymers could form a vesicular structure in an aqueous solution by self-assembly. The hollow structure of the PNIPAAm-b-PPG-b-PNIPAAm vesicles combined with the temperature-sensitive property may enable many potential applications of the vesicles.     

[M(en)3] (ndt)•H2O的水热合成、晶体结构和光学性能 ( M=NiⅡ, CoⅡ, MnⅡ and ndt=1,5-naphthalenedithiolate )

水热条件下，合成了三个新的配合物[Ni(en)₃] (ndt) ·H₂O 1, [Co(en)₃] (ndt) ·H₂O 2 和[Mn(en)₃] (ndt) ·H₂O 3。晶体结构通过X-射线单晶衍射进行了表征。三个配合物均属于单斜晶系，Cc空间群。[M(en)₃]²⁺阳离子、ndt阴离子和结晶水分子通过氢键自组装出相同结构的三维网。通过紫外-可见-近红外漫反射光谱对这三个配合物的光吸收性能和能带进行了测定。     

LiMn2O4的湿法合成及锰的光度法测定研究

The LiMn₂O₄ spinel was prepared by wet method using Li₂CO₃， Mn(CH₃COO)₂·4H₂O and CO₂ as raw ma-terials. The products were measured by TG/DTA， XRD， IR. The results Showed that the sample calcined at 800℃ for 10h was well crystallized monophase product. The contents of Mn(Ⅲ) and Mn(Ⅳ) of LiMn₂O₄ spinel were determined simultaneously by spectrophotometric analysis with pyrophosphoric acid.     

Determination of Naphthalenesulfonate Isomers in Industrial Effluents and River Water by Solid‐Phase Extraction and Capillary Zone Electrophoresis

This work presents a method to separate polar naphthalenesulfonate (NS) isomers by capillary zone electrophoresis (CZE) with ultraviolet detection in industrial effluents and river water samples. The method involves extraction of samples by a polystyrene‐divinylbenzene copolymer (PS‐DVB) solid‐phase extraction (SPE) cartridge. The most effective CZE separation conditions were obtained in 20 mM borate buffer with 30% acetonitrile at pH 9.0 and 30 °C. The method proposed herein provides a high precision and sensitivity for NS isomers, to quantitation at ≤ 1.0 μg/L in 200 mL of the water samples. Recovery of the NS isomers in spiked water samples ranged from 73% to 87% while RSD ranging from 5.6 to 9.7%. The analysis of industrial effluents and river water samples was performed and naphthalene‐2‐sulfonate was found as a major pollutant. The difficulties in quantitating and identifying analytes in complex environmental samples can be resolved by using an internal standard response factor to calculate concentrations and relative migration times for peak confirmation.     

负载型镍金属催化剂上甲烷与二氧化碳重整制合成气

报道了负载型Ｎｉ金属催化剂的表面特征和对ＣＨ４与ＣＯ２重整制合成气的催化性能，反应结果和ＴＰＲ，ＸＲＣ结果表明：Ｎｉ担载量为９．０％的催化剂具有最佳的反应性能，Ｎｉ组分以高散表面化合物形式存在，助剂对催化剂活性的影响随载体和添加方式的不同较大差异，其中少量ＭｇＯ，Ｌａ２Ｏ３对改善催化剂的稳定性和抗积碳能力有十分显著的效果，载体和制备方法对催化剂性能具有明显影响，其中浸渍法制备的Ｎｉ／ＭｇＯ催化剂不     

混合模式硅胶基质毛细管电色谱整体柱的制备及其电色谱性能研究

采用温和条件下的溶胶-凝胶技术，成功制备了阴离子交换-反相混合模式硅胶基质毛细管电色谱整体柱。通过调整反应液中不同前体的比例，优化了整体柱的制备条件。通过扫瞄电镜，对柱床进行了表征和分析。实验发现，所制备的整体柱电渗流的方向和大小可随流动相pH值的改变而改变，在酸性和中性条件下，具有从阴极流向阳极的电渗流；当流动相pH值升至约7．5时，电渗流方向发生了反转（由阳极流向阴极）。在优化的实验条件下，用所制备的整体柱对所考察的酸性（中性）化合物实现了快速分离，并获得了高达160，000N／m的柱效。     

Vacancy ion-exclusion chromatography of aromatic carboxylic acids on a weakly acidic cation-exchange resin

Determination of aromatic carboxylic acids by conventional ion-exclusion chromatography is relatively difficult and methods generally rely on hydrophobic interaction between the solute and the resin. To overcome the difficulties in determining aromatic carboxylic acids a new approach is presented, termed vacancy ion-exclusion chromatography, which is based on use of the sample as mobile phase and an injection of aqueous 10% methanol onto a weakly acidic cation-exchange column (TSKgel OApak-A). Highly sensitive conductivity detection occurred with sharp and well-shaped peaks, leading to very efficient separations. The effects of sulfuric acid concentration added to the mobile phase, flow-rate, and column temperature on the retention volume of tested aromatic carboxylic acids was investigated. Retention times were found to be affected by the concentration of the analytes in the mobile phase and to some extent also by the addition of an organic modifier such as methanol to the injected water sample. Separation of sulfuric acid (SA), naphthalenetetracarboxylic acid (NTCA), phthalic acid (PA) and benzoic acid (BA) was satisfactory using this new approach. Detection limits were 0.66, 0.67, 0.42 and 0.86 microM and detector responses were linear in the range 1-100, 1-80, 2.5-100 and 10-40 microM, for SA, NTCA, PA and BA, respectively. Precision for retention times was 0.36% and for peak areas was 1.5%.