Novel Phenomenon of Oxygen-to-oxygen Silyl Migration in Directed Aldol Reaction

The phenomenon of migration of the silyl groups from α-oxygen to β-oxygen in sodium aldol reaction was observed for the first time in this paper.     

STUDIES OF MULTICOMPONENT COMPLEX OXIDE CATALYSTS FOR OXIDATIVE COUPLING OF METHANE VI.SURFACE BASICITY AND SURFACE ACTIVE OXYGEN SPECIES OF LiTi_xLa_(1-x)O_2 λ MULTICOMPONENT OXIDE CATALYSTS

The surface basicity of Ti-La-Li multicoinponent oxides has been investigated by means of CO2-TPD. The experiment results show that C2 (C2H6 C2H4) selectivity is related to surface basic strength. The surface active oxygen species have also been characterized by means of XPS, O2-TPD and so on. It has been indicated that C2 selectivity and CH4 conversion are correlated with lattice oxygen and the adsorbed oxygen on the surface of the catalyst respectively In the O2-TPD experiments, it has also been found that there are three kinds of oxygen species on the surface of the series catalvsts, which are a (100℃ 750℃) Among them α-oxvgen causes deep oxidation whileβand γ oxygen species are related to oxidalive coupling of methane (OCM).     

STUDIES ON cis-trans-ISOMERIZATION AND REACTION KINETICS OF A μ, η~2-VINYL LIGAND IN A TRIOSMIUM CLUSTER

The dihydride cluster H_2O_(s_3)(CO)_(10) reacts with ethyne to give a cis-adduct [O_(s_3)H(μ,η~2-CH=CH_2)(CO)_(10)]. The high deuterated cluster D_2O_(s_3)(CO)_(10), the reaction of D_2O_(s_3)(CO)_(10)with ethyne C_2H_2 to form the vinyl product cluster [O_(s_3)D(μ, η~2-CH=CHD)(CO)_(10)], and thereaction of H_2O_(s_3)(CO)_(10) with the deuterated ethyne C_2D_2 to form [O_(s_3)H(μ,η~2-CD=CDH)(CO)_(10)] have been reported primarily in this paper. The two cis-adducts undergo cis-trans-isomerization of μ,η~2-vinyl ligands under a small amount of the nucleophile pyridine. Usingthe combination of deuteration and dynamic ~1H,~2H NMR spectra, we report the experimen-tal evidence determined by the dynamic ~1H, ~2H NMR spectra, mechanism, and kinetic dataof the isomerization.     

羧甲基壳聚糖/聚乙烯醇/甘油环氧树脂蛇笼型复合螯合膜的制备及对金属离子的吸附性能

以交联甘油环氧树脂交联的聚乙烯醇(PVA)为笼树脂，羧甲基壳聚糖(CCTS)为蛇树脂制备了具有蛇笼结构的复合螯合膜，研究了其对Cu^2 、Ni^2 、Pb^2 、Fe^3 、Zn^2 ，Hg”^2 、Cd^2 等金属离子的吸附性能，研究表明，该树脂对Cu^2 、Ni^2 、Pb^2 有较好的吸附性能，其中PVA是对Cu^2 的吸附的主要贡献者，而CCTS则是在对Ni^2 的吸附中起主要作用。该树脂可以用于含Cu^2 废水的处理。     

光纤松耦合型传感器特性研究

本文介绍一种实用的光纤传感器,它由二根光纤或多根光纤紧靠一起,并在同一位置除去局部包层,成为松耦合状态,在这种状态下,研究了它的特性和应用。 当耦合间隙中充满某种液体介质时,耦合效率明显增大,因此可以方便地判别该介质是否存在。并且实验证明了一种光纤只能有一种相近于光纤芯子折射率的介质具有最大的灵敏度。当间隙内的介质不变时,耦合功率的大小决定于耦合距离d和耦合长度l,l一旦决定以后,d的调节精度为0.1mm量级,易于在机械结构上实现线性检测。     

Synthesis of a Mimicking Hybrid of Annonaceous Acetogenin with Steroid for Antitumoral Activity Investigation

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｔｈｅｐａｓｔｔｗｏｄｅｃａｄｅｓ ,ａｌａｒｇｅｆａｍｉｌｙｏｆｎａｔｕｒａｌｐｒｏｄｕｃｔｓｎａｍｅｄａｎｎｏｎａｃｅｏｕｓａｃｅｔｏｇｅｎｉｎｓｗｅｒｅｉｓｏｌａｔｅｄａｎｄｃｈａｒａｃｔｅｒｉｚｅｄｂｙｔｈｅｇｌｏｂａｌｒｅｓｅａｒｃｈｅｒｓｆｒｏｍｖａｒｉｏｕｓｓｐｅｃｉｅｓｏｆｔｈｅｐｌａｎｔａｎｎｏｎａｅａｅ .1Ａｍｏｎｇｏｖｅｒ 4 0 0ｍｅｍ ｂｅｒｓ,ｍｏｓｔｏｆｔｈｅｍｗｅｒｅｆｏｕｎｄｔｏｓｈｏｗｐｏｔｅｎｔｃｙｔｏｔｏｘｉｃａｎｄａｎｔｉｔｕｍｏｒａ…     

20GHz注入锁模光纤激光器实验

稳定、波长可调谐的窄脉冲光源是未来光时分复用/波分复用光纤通信系统的重要组成部分。报道了一个20GHz的注入锁模光纤激光器的实验。利用一个10GHz的导体体激光器作为光源，最终得到了波长可调谐的重复频率为20GHz、脉冲宽度为12.4ps的光脉冲，波长的调谐范围为16nm。     

用序列二次规划法设计ICF 靶区光路

 运用序列二次规划法设计了靶区光路。由ICF 柱面靶间接驱动实验对多路激光束排布的要求, 建立靶区数学模型, 用本文设计结果构筑光路排布线框实体。该三维线框以特征线代表60路激光驱动光束实体, 以特征线段的转折点代表240面反射镜的空间位置。     

A new analytical edge spread function fitting model for modulation transfer function measurement

We propose a new analytical edge spread function (ESF) fitting model to measure the modulation transfer function (MTF).The ESF data obtained from a slanted-edge image are fitted to our model through the non-linear least squares (NLLSQ) method.The differentiation of the ESF yields the line spread function (LSF),the Fourier transform of which gives the profile of two-dimensional MTF.Compared with the previous methods,the MTF estimate determined by our method conforms more closely to the reference.A practical application of our MTF measurement in degraded image restoration also validates the accuracy of our model.     

EACVD中用氢原子谱线测定电子平均能量

采用蒙特卡罗方法，对EACVD中氢原子的发射过程进行了模拟。给出了由氢原子谱线测定电子平均能量的方法，结果对EACVD生长金刚石薄膜过程中实时监测电子平均能量，进而可以有效地控制工艺条件，生长出高质量的金刚石薄膜具有重要意义。