Further study of the viscoelastic phase separation of cyanate ester modified with poly(ether imide)

In this study, the viscoelastic phase separation process was studied further by time‐resolved light scattering, differential scanning calorimetry, and scanning electron microscopy in the system of poly(ether imide)‐modified bisphenol‐A dicyanate. It was observed that the evolution time of phase structure and relaxation time of diffusion flow of the bisphenol‐A dicyanate were similar with the phase diagram of curing conversion versus content of PEI. The results suggested that the viscoelastic phase separation was affected by the curing conversion of the system at the onset point of phase separation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 517–523, 2006     

Simultaneous electrochemical determination of uric acid and ascorbic acid on a glassy carbon electrode modified with cobalt(II) tetrakisphenylporphyrin.

A cobalt(II) tetrakisphenylporphyrin (Co(II)TPP) film modified glassy carbon electrode (Co(II)TPP-GCE) was prepared by just coating Co(II)TPP solution on the surface of the electrode. It can be used for the simultaneous determination of ascorbic acid and uric acid. The anodic peaks of AA and UA can be separated well. Owing to the strongly hydrophobic property of porphyrin, the modified electrode has good stability and long life. The linear range for UA and AA were 2.0 x 10(-6)-1.0 x 10(-4) M and 9.0 x 10(-6)-2.0 x 10(-3) M with detection limits of 5.0 x 10(-7) and 5.0 x 10(-6) M, respectively. Furthermore, metalloporphyrins of other kinds were also used to construct modified electrodes. Their performances were inferior compared with that of the Co(II)TPP modified electrode.     

Synergistic effect between 4-(2-pyridylazo) resorcin and chloride ion on the corrosion of cold rolled steel in 0.5 M sulfuric acid

The corrosion inhibition of 1-(2-pyridylazo)-2-naphthol (PAR) on the corrosion of cold rolled steel in 0.5 M sulfuric acid (H₂SO₄) was studied using weight loss method and potentiodynamic polarization method. Results obtained revealed that together with chloride ion, PAR is an effective corrosion inhibitor for steel corrosion in sulfuric acid. It was found that for steel corrosion inhibition in the presence of single PAR in sulfuric acid the Temkin adsorption isotherm may be used to explain the adsorption phenomenon. For the mixture of PAR and NaCl used as corrosion inhibitor, however, the Langmuir adsorption isotherm can be used to satisfactorily elucidate the adsorption of mixture of PAR and NaCl. Potentiodynamic polarization studies showed that single PAR mainly acts as a cathodic inhibitor for the corrosion of steel in 0.5 M sulfuric acid. The mixture of PAR and chloride ion, however, acts as a mixed type inhibitor that mainly inhibits cathodic reaction of the steel corrosion in sulfuric acid. By means of electrochemical polarization tests, a desorption potential at ca. −370 mV was observed for the adsorption of mixture of PAR and chloride ion, when potential reaches this value, adsorbed inhibitor molecule heavily departs from the steel surface. For the mixture of PAR and chloride ion, thermodynamic parameters such as adsorption heat, adsorption entropy and adsorption free energy were obtained from experimental data of the temperature studies of the inhibition process at four temperatures ranging from 30 to 45 °C, the kinetic data such as apparent activation energies and pre-exponential factors at different concentrations of the inhibitor were calculated, and the effect of the apparent activation energies and pre-exponential factors on the corrosion rates of cold rolled steel was discussed. The most suitable range of inhibitor concentration was discussed. The inhibitive action was satisfactorily explained by using both thermodynamic and kinetic models. Synergism between chloride ion and PAR was proposed. The results obtained from weight loss and potentiodynamic polarization were in good agreement.     

聚甲基丙烯酸甲酯掺杂Ce3+的飞秒激光三维信息存储

用飞秒激光(200 fs,1 kHz,800 nm)脉冲在掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯(PMMA)膜中进行了光存储实验研究,包括对样品的吸收光谱、激光照射前后的电子旋转共振(Electron spin resonance,ESR)光谱的测量和讨论。结果表明掺杂稀土离子Ce3 的聚甲基丙烯酸甲酯膜具有较低的写入阈值,有利于高速、并行的三维光存储。实验结果采用传统光学显微镜并行读出。给出了四层存储结果(点间距和层间距分别是4μm和16μm),并讨论了脉冲能量的大小对空腔尺寸的影响,进行高密度存储时,在保证读出信号灰度值足够大的情况下,应选择尽量小的激光脉冲写入能量。实验结果表明这种材料可以应用于三维光信息存储。     

A local strict comparison theorem and converse comparison theorems for reflected backward stochastic differential equations

A local strict comparison theorem and some converse comparison theorems are proved for reflected backward stochastic differential equations under suitable conditions.     

Optosensing of hydrochloric acid based on the fluorescence quenching of a flavone copolymer

An optical fiber sensor for the continuous determination of hydrochloric acid is presented. It is based on the fluorescence quenching of a flavone containing copolymer membrane by hydrochloric acid. The quenching efficiency is greatly enhanced in the presence of Fe(III). This enhancement is attributed to the primary inner filter effect, as well as the formation of a complex between the 4′-N,N-dimethylaminoflavone group in the copolymer and the Fe(III) species extracted from hydrochloric acid solution. The optical response is linear and reversible for 0.10–6.00 mol L^–1 HCl with a response time of the order of a second. The standard deviations for repeated alternative measurements of 0.20 and 2.00 mol L^–1 hydrochloric acid are 0.32% and 0.46% (n = 10), respectively, indicating a good reproducibility. Because of the covalently bonding of the dye to polymer, the sensor exhibits also a good stability. Selectivity has also been evaluated for some potential interferents. The sensor in conjunction with a flow-injection system can be used for on-line determination of hydrochloric acid.     

添加助剂的钙钛矿型氧化物NdMO_3上的甲烷氧化偶联——Ⅱ.15% Li_2O/NdMO_3(M=Cr、Mn、Fe、Co、Ni)上的OCM反应研究

在添加了15%Li_2O的NdMO_3(M=Cr、Mn、Fe、Co、Ni)上进行了甲烷氧化偶联(OCM)反应研究.通过改变反应气中CH_4:O_2浓度比,在氧化态和“脱氧态”催化剂上的CH_4脉冲反应,探讨了表面吸附氧和晶格氧在OCM反应中的作用以及NdMO_3中不同金属离子(M)对OCM反应活性的影响等.     

The practice for eight-year operation of the cobalt-60 irradiation facility at Beijing Radiation Application Research Center

The radiation facility was made by Sulzer Company in Switzerland. The designed capacity is 3.7 × 10¹⁶Bq( 1MCi) and 12.21 × 10¹⁵Bq(330kCi)of Cobalt -60 source was loaded at the first phase. Current cobalt -60 source-loading is 2.4 × 10¹⁶Bq(650kCi). The equipment assembling and installation regulating and testing were completed at the end of 1988. The facility was put into commissioning in 1989. It operates 7000–8000 hours per year. The facility has been utilized to carry out many research work and irradiate many kinds of items. Lots of economical benefits have been gained since then. Now it is becoming a radiation processing model base in China. This paper summarized the strong and weak points of the design of the facility through in eight years' practice and analysed the economical benefits.     

微型硅谐振式力传感器的振动分析

介绍了谐振式力传感器的工作原理，并从理论上和实验上对中科院合肥智能所研制的第一代微型硅谐振梁（３×０．４×０．０４５ｍｍ＾３）式测力传感器进行了全面的振动分析，所得结构为其进一步优化设计提供了科学根据，文中使用的实验分析方法，为其它微小物体的动态和识别提供了一条有效途径。