Low-phosporous nickel-coated carbon microcoils: Controlling microstructure through an electroless plating process

Carbon microcoils (CMCs) have been coated with a nickel-phosphorus (Ni-P) film using an electroless plating process, with sodium hypophosphite as a reducing agent in an alkaline bath. CMC composites have potential applications as microwave absorption materials. The morphology, elemental composition and phases in the coating layer of the CMCs and Ni-coated CMCs were investigated by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD), respectively. The effects of process parameters such as pH, temperature and coating time of the plating bath on the phosphorus content and deposition rate of the electroless Ni-P coating were studied. The results revealed that a continuous, uniform and low-phosphorous nickel coating was deposited on the surface of the CMCs for 20 min at pH 9.0, plating bath temperature 70 °C. The as-deposited coatings with approximately 4.5 wt.% phosphorus were found to consist of a mix of nano- and microcrystalline phases. The mean particle size of Ni-P nanoparticles on the outer surface of the CMCs was around 11.9 nm. The deposition rate was found to moderately increase with increasing pH, whereas, the phosphorous content of the deposit exhibited a significant decrease. Moreover, the material of the coating underwent a phase transition between an amorphous and a crystalline structure. The thickness of the deposit and the deposition rate may be controlled through careful variation of the coating time and plating bath temperature.     

Fluorinated Porous Poly(spirobifluorene) Via Direct C‒H Arylation: Characterization,Porosity, and Gas Uptake

Considering intrinsic properties of conjugated polyfluorenes and special functions of porous polymers, synthesis of fluorinated porous poly(spirobifluorene) via direct C?H arylation polycondensation is explored. Owing to the contorted structure and cross-linking nature, the obtained polymer FPSBF shows permanent porosities with Brunauer–Emmett–Teller specific surface area up to 700 m² g^?1 and exhibits a narrow pore size distribution with the dominant pore size at about 0.63 nm, which is more suitable for adsorption of small gas molecules. Based on the measured gas physisorption isotherms with pressure up to 1.13 bar, the obtained polymer shows good uptaking capacities for hydrogen (1.30 wt% at 1.0 bar and 77 K) and methane (4.80 wt% 1.0 bar and 273 K). Moreover, FPSBF has significant adsorption selectivity for CH₄ against N₂ and the estimated ideal adsorption selectivity ratio is up to 30/1 at 1.0 bar and 273 K, which makes the material possess potential application in gas separation.     

The preparation of a novel polydopamine-graft-poly(2-methyl-2-oxazoline) protein-resistant coating and its applications in protein separation

A novel polydopamine-graft-poly(2-methyl-2-oxazoline)(PDA-g-PMOXA) coating was prepared by immobilizing poly(2-methyl-2-oxazoline)(PMOXA) onto material surfaces through polydopamine (PDA) anchored coating for the first time.And then,the chemical composition,hydrophilicity,and protein-resistant properties of the PDA-g-PMOXA coating were studied using X-ray photoelectron spectroscopy(XPS),contact angel(CA) test,surface plasmon resonance(SPR),and quartz crystal microbalance with dissipation(QCM-D) measurement.Finally,the coating was applied to the capillary inner surface for protein separation by capillary electrophoresis(CE).     

A convenient synthesis of 2β,3α-dihydroxyurs-12-en-28-oic acid as a natural diastereoisomer of corosolic acid

2β,3α-Dihydroxyurs-12-en-28-oic acid（6） is a naturally occurring diastereoisomer of corosolic acid with glycogen phosphorylase inhibitory activity.A new strategy for the semi-synthesis of 6 was developed.Using the commercially available ursolic acid（1） as the starting materials,6 was synthesized through five facile reactions with a high stereoselectivity and an overall yield of 47.3%.The structure of 6 was confirmed by optical rotation.ESI-MS,¹H NMR and ¹³C NMR data.     

枝晶簇四方相钛酸钡的制备及其电场响应性能的研究

为了提高BaTiO3粒子在含水复合弹性体中的电场响应能力,本文采用简单的水热合成法,在不引入任何表面活性剂的情况下,仅通过对反应温度和溶液pH值的调控获得了新颖形貌的钛酸钡粒子。通过借助X射线衍射(XRD)、拉曼光谱(Raman)、扫描电子显微镜(SEM)及接触角(Contact Angle)测量等手段对粒子的微观结构和表面特性进行表征发现:该粒子为高纯四方相枝晶簇结构,具有良好的亲水性,而且在含水复合弹性体中对电场具有优良的响应能力。     

Study on sorption of U(VI) onto ordered mesoporous silicas

The mesoporous silicas (MCM-41 and MCM-48) are synthesized by hydrothermal method, which are characterized by XRD and BET techniques. The application of mesoporous silicas for the sorption of U(VI) from aqueous solution are studied by using batch technique under ambient condition. The effects of contact time, solid-to-liquid ratio (m/V), solution pH, ionic strength and temperature are determined, and the results indicate that the sorption of U(VI) to MCM-41 or MCM-48 are strongly dependent on pH values but independent of ionic strength. Compared with Langmuir model, the sorption isotherms can be simulated by Freundlich model well according to the high relative coefficients. The parameters for Langmuir and Freundlich sorption isotherms are calculated from the temperature at 298, 318 and 338 K, respectively, and the results suggest that the sorption of U(VI) on MCM-41 or MCM-48 is a spontaneous and exothermic process. In contrast to its sorption capacity for U(VI), MCM-48 is a suitable material for the preconcentration of U(VI) from large volumes of aqueous solutions.     

A Trinuclear Ni(Ⅱ) Mixed-ligand Complex Containing Pentadentate N-butylsalicylhydrazide and Monodentate Imidazole:Synthesis, Characterization and Crystal Structure

A novel trinuclear nickel(Ⅱ) complex [Ni3(bushz)2(Himdz)2(H2O)2]?2DMF (1, bushz=N-butylsalicylhydrazide, Himdz=imidazole, DMF=N,N-dimethyl-formamide) has been synthesized and characterized by X-ray single-crystal diffraction characterization. Complex 1 crystallizes in the monoclinic system, space group P21/c with a=7.706(7), b=14.882(6), c=18.639(6) , β=108.08(2)o, V=2032(1) 3, Dc=1.525 g/cm3, Mr=932.95, Z=2, F(000)=972, μ=1.442 mm-1, the final R=0.0359 and wR=0.0771. The three nickel(Ⅱ) atoms in 1 are arranged in a strictly linear structure and exhibit alternating square-planar and octahedral geometries. The complex is connected to form a supramolecule with an infinite three-dimensional network through intermolecular hydrogen bonds. The electrochemical studies reveal that redox of Ni3+/Ni2+ in the complex is a quasi-reversible process. The thermal stability of the title complex was also studied.     

Synthesis, structures, and magnetic properties of carboxylate-bridged trinuclear complexes based on low-spin manganese(III)/iron(III) building blocks

Four linear trinuclear transition metal complexes have been prepared and characterized. The complexes [M^II(MeOH)₄][Fe^III(L)₂]₂·2MeOH (M = Fe (1) or Ni (2)), [Co^II(EtOH)₂(H₂O)₂][Fe^III(L)₂]₂·2EtOH (3), and [Mn^II(phen)₂][Mn^III(L)₂]₂·4MeOH (4) (H₂L = ((2-carboxyphenyl)azo)-benzaldoxime, phen = 1,10-phenanthroline) possesses a similar syn–anti carboxylate-bridged structure. The terminal Fe(III) or Mn(III) ions are low spin, and the central M(II) ions are high spin. Magnetic measurements show that antiferromagnetic interactions were present between the adjacent metal ions via the syn–anti carboxylate bridges. The antiferromagnetic coupling between low-spin Fe(III) and Ni(II) is unusual, which has been tentatively assigned to the structural distortion of Fe(III).     

Synthesis and inclusion properties of pillar[n]arenes

A detailed study of the reaction conditions revealed that a quantitative cyclocondensation of 1,4-dialkoxy-2,5-bis(alkoxymethyl)-benzenes to pillar[n]arenes can be achieved by catalysis of p-toluenesulfonic acid in CH₂Cl₂. Major product of this new reaction is in each case a cyclopentamer (n = 5), but small amounts of the pillar[n]arenes with n = 6, 7 and 10 can be obtained as well. Different alkoxy groups in 1- and 4-position lead to regioisomers. All cyclooligomers exist in pillar structures as pair of enantiomers, which show a racemisation at room temperature, which is fast in terms of the NMR time scale. The racemisation process occurs by rotation of the 1,4-phenylene segments in the macrocyclic rings. Pillar[n]arenes exhibit novel host–guest behavior.