A Novel Highly Sensitive and Selective Fluorescent Sensor for Imaging Copper (II) in Living Cells

In this work, we designed and synthesized a novel quinolin-based derivative which exhibited signaling behaviors for Cu²⁺. Upon the addition of Cu²⁺ to the solution of the molecule, it displayed an obvious fluorescence quenching in a linear fashion due to the formation of a 1:1 metal–ligand complex. This fluorescent sensor exhibited a rare sensitivity toward Cu(II) (the level of magnitude could be 6?×?10^?8), a rapid response (<10 s) and also high selectivity toward Cu²⁺ over other metal ions such as Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Fe³⁺, Mn²⁺, Hg²⁺, Pb²⁺, Cd²⁺, Cr³⁺, Co²⁺, Zn²⁺ and Al³⁺. Simultaneously, the cell imaging experiments and filter paper test demonstrated its extensive applicability.     

Graphene-based passively Q-switched Nd:KLu(WO4)2 eye-safe laser operating at 1,425 nm

With graphene as saturable absorber, an Nd:KLu(WO₄)₂ eye-safe laser operating at 1,425 nm is demonstrated. To the best of our knowledge, this is the first demonstration that an Nd:KLu(WO₄)₂ laser operates at the eye-safe 1.4-μm region. A maximum total average output power of 170 mW is obtained under the pump power of 9.6 W, corresponding to an optical–optical efficiency of 1.77 %. The minimum pulse width and the highest pulse repetition rate are 153 ns and 97 kHz, respectively. Also the characteristics of the graphene used as saturable absorber for a 1.4-μm laser were studied for the first time.     

Study of a millimeter-wave squint indirect holographic algorithm suitable for imaging with large field-of-view

In this paper a millimeter-wave （MMW） squint indirect holographic method is presented, which is suitable for imaging with a large field-of-view. The proposed system employs the squint operation mode to remove the background and twin- image interferences, which achieves a similar effect to off-axis holography but leaves out the large-aperture quasi-optical component. The translational scanning manner enables a large field of view and ensures the image uniformity, which is difficult to realize in off-axis holography. In addition, a corresponding imaging algorithm for the presented scheme is developed to reconstruct the image from the recorded hologram. Some imaging results on typical objects, obtained with electromagnetic simulation, demonstrate good performance of the imaging scheme and validate the effectiveness of the image reconstruction algorithm.     

高温超导电缆直流测试电源平台的搭建

根据高温超导电缆测试用直流电源平台的要求,建立了硬件平台。该平台为模块化结构,具有输出精度高,便于扩展等特点;为方便操作,建立了基于LabVIEW的软件平台,对直流电源平台进行远程控制,并给出了远程控制的程序流程图,实现了电流的匀速上升和下降以及上升过程中的中断操作;利用该电源平台进行了超导电缆的临界电流测试实验,验证了直流电源平台符合高温超导电缆的测试要求。     

Efficient Fluorescent Recognition of Carboxylates in Aqueous Media Using Facilely Electrosynthesized Poly(9-Aminofluorene)

A variety of carboxylates were recognized using poly(9-aminofluorene) (P9AF) in the HEPES buffer (pH 7.4), and a proposed possible mechanism was proposed as following. The intermolecular hydrogen bonding interactions resulted in electron transfer between P9AF and carboxylates. P9AF was facilely electrosynthesized in boron trifluoride diethyl etherate and could be used as an efficient fluorescent sensing material for the detection of AcO^?. On binding to AcO^?, fluorescence quenching of P9AF was demonstrated by a maximum 80 % reduction in the fluorescence intensity, while no obvious fluorescence change could be observed in the presence of some other common anions. Some different carboxylates could be recognized at different levels by P9AF. Substituent groups in carboxylates could affect the intermolecular interaction between carboxylates and P9AF. These could be explained by a possible mechanism that hydrogen bonding was the main way of intermolecular interactions between P9AF and carboxylates, which was further confirmed by absorption spectra monitoring and density functional calculations. The significant advantage of this strategy is that it does not require a prequenching procedure and the polymer can be used directly for analyte detection.     

激光喷丸改善TC6钛合金组织和力学性能

为了使激光冲击强化技术能较好地应用于TC6钛合金的发动机叶片,对TC6钛合金进行试验研究。通过X射线衍射仪、透射电子显微镜等测试技术分析了不同参数下TC6钛合金的微观组织变化,用显微硬度计和残余应力测试仪分别表征表层硬度和残余应力变化,并测试材料冲击后的振动高周疲劳性能。试验结果表明:激光冲击材料后表面组织得到明显细化,随着冲击次数的增加,先后出现了高密度位错、位错胞、亚晶和纳米晶。性能方面,表面硬度在冲击一次即可提高19%,硬度影响深度达到700 m;与此同时表面残余应力最高达到-608.5 MPa,在500 m深度上仍具有-100 MPa左右的应力存在。经三次冲击后,标准疲劳试片的疲劳极限提高近20%。     

X波段左手材料高功率微波天线罩实验研究

为改善高功率微波天线的性能,设计了一种新型X波段左手材料高功率微波天线罩,并对其进行了实验冷测研究。结果表明,加载一到四层左手材料天线罩均可在一定频率范围内汇聚波束和提高增益,其中加载一层左手材料天线罩时,天线增益提高最大,在频率为9.32 GHz时增益提高最大幅度约为9.64 dB。将实验结果与理论仿真进行对比发现,两者并没有吻合一致。分析了天线罩的功率容量,可以实现高功率微波的应用。     

太赫兹电磁波大气吸收衰减逐线积分计算

大气对太赫兹辐射传输存在一定的非协作性,即存在吸收衰减。为了实现太赫兹辐射的有效应用必须细致地了解太赫兹辐射大气传输的窗口位置、宽度及大气透过率。选取了处理大气非均匀路径、吸收带重叠等大气辐射传输问题的最精确方法逐线积分法,发展计算程序,并基于HITRAN分子谱线数据,对水汽、氧气、臭氧、氮气、二氧化碳等单组分气体分子对太赫兹辐射传输的吸收衰减情况进行了计算与分析,并给出了在太赫兹电磁波大气传输衰减中占主要因素的水汽和氧气的衰减峰位置。     

微谐振环结构体内太赫兹增强效应

基于严格电磁场理论,给出了微型谐振环形和Fishnet结构体内太赫兹波的严格表达式,并利用电磁场的边界条件分析了太赫兹波在微型谐振环形和Fishnet结构体内空间分布的增强效应。数值模拟结果表明:谐振环金属条附近的电场大于磁场,金属条附近的电场相对其他区域明显要强得多,开口处表现更为突出,太赫兹波在Fishnet结构体内电磁场的峰位处电场和磁场分布关于x对称;电场的极值出现在大十字架的上下四个角,而磁场的极值则出现在小十字架的上下两端点。同时用电磁场传输线理论对该现象作出一定的物理解释。收稿日期:; 修订日期:     

激光照明水下目标距离选通成像系统的研制

基于水下目标探测的应用需求,研制开发了一套激光水下距离选通成像系统。系统采用波长532 nm、最大单脉冲能量400 mJ的Nd:YAG脉冲激光器作为照明光源,采用最小选通门宽3 ns、像元10241024的ICCD相机作为门选通器件和图像记录器件,利用DG535型数字脉冲发生器作为精确延时和同步控制器件实现激光脉冲和ICCD相机选通门的同步以实现距离选通功能。利用该系统在某水库进行了水下目标探测实验,实验结果表明,该系统可在6.5倍的衰减长度上识别目标,在8倍衰减长度上发现目标。