Study on the Interaction Between Oxymatrine and Tungstosilicic Acid by Resonance Rayleigh Scattering and Its Analytical Applications

In the 0.1 mol · L^?1 hydrochloric acid solution, oxymatrine reacted with tungstosilicic acid to form a 2:1 ion-association complexes. This results in a great enhancement of resonance Rayleigh scattering. The maximum resonance Rayleigh scattering wavelength was located at 393 nm. Resonance Rayleigh scattering intensity was proportional to the concentration of oxymatrine in the range of 1.5–26.4 µg · mL^?1, and the detection limit (3σ) was 0.23 µg · mL^?1. The optimum conditions and the effects of coexisting substances on the reaction were investigated. The method shows a wide linear range and high sensitivity, and was applied to the determination of oxymatrine in marine capsules and human urine samples with satisfactory results. Therefore, a highly sensitive, simple, and quick method has been developed for the determination of oxymatrine.     

Interaction between isoamyl adenine and rice cytokinin oxidase

Cytokinin (CTK) dehydrogenase is responsible for regulating the endogenous CTK content by oxidative removal of the side chain. Herein, we have applied fluorescence method to study the interaction between CTK dehydrogenase and CTK in vitro and obtain some parameters of their interaction. We found that addition of isopentenyl adenine can quench the fluorescence of CTK dehydrogenase, and the quenching mechanism was to be a static quenching procedure. We have measured the number of binding sites n and the apparent binding constant K and have calculated the thermodynamics parameter ΔH, ΔG, and ΔS by fluorescence quenching method. Based on thermodynamics parameter’s results, we concluded that their binding reaction was both entropy driven and the enthalpy driven, and the Van der Waals force and hydrogen bond force played a major role in the interaction. Based on the synchronous fluorescence spectrometry results, we demonstrated that the binding site between isopentenyl adenine and CTK dehydrogenase is in the microenvironment of both tryptophan and tyrosine. The fluorescence signal of coenzyme, flavin adenine dinucleotide, decreases gradually with the addition of isopentenyl adenine. And this method can be used for isopentenyl adenine routine assay. Under optimized experimental parameters, the linear segment increases from 0.6 µM to 100 µM with a regression equation of ΔF = 0.04 + 0.15c_ip (r = 0.999, c_ip in µM) with the detection limit of 0.15 µM iP.     

Preconcentration and Separation of Gold(III) from Ore Samples by Solid-Phase Extraction Prior to Its Catalytic Fluorescent Determination

ABSTRACT

A new catalytic kinetic fluorescent quenching method for the determination of trace gold(III) was investigated. The method was based on the catalytic effect of gold on oxidation of 3-(3′-methylphenyl)-5- (2′-arsenoxylphenylazo) rhodanine by hydrogen peroxide in potassium hydrogen phthalate–hydrochloric acid (pH = 3.4). Under the optimum conditions, the great decrease of fluorescence intensity has a linear relationship against the concentration of gold in the range of 0 to 12.0 µg·L^?1 with a detection limit of 6.0 × 10^?10g·L^?1. The coexistent metal ions can be separated, and gold can be enriched by TBP resin of solid-phase extraction, which greatly improves the selectivity and sensitivity of the system. The method can be used to determine trace amounts of gold in ore samples successfully with satisfactory results.     

The Electronic Absorption Spectra of Binuclear Complexes,[Cu(o-phen) (sal)No3 and [Cu2 (sacch)4(im)4] Crystal

The electronic absorption spectra of crystals of the title componds were recorded and the experimental results were explained quantitatively with the ligand field theory and the radial wave function of bound Cu(II) cation. With these spactra, the range of magnetic interactions between two Cu(II) ions of the title compounds are discussed.     

Spectra Studies of Complexes Between Palladium (II), Nickel (II) and Amino Acids

The complexes of Ni (His) 2·H2O, Ni (Gly) 2·2H2O, Pd (His)Cl2·H2O and Pd(Gly) 2·2H2O were synthesized. And the IR, electronic absorption and photoacoustic spectra of these complexes were measured in solid state. The nature of the metal-carboxylate coordinate bond were deduced from the variation in the carboxyl stretching frequencies. And the d-d transition absorptions of these complexes were interpreted quantitatively with the 3d scaling radial theory. Therefore, the structural characterizations were also discussed with their spectral behaviors.     

Experimental measurement of the electrical conductivity of pyroxenite at high temperature and high pressure under different oxygen fugacities

Electrical conductivities of pyroxenite were measured between frequencies of 10^?1 and 10⁶ Hz in a multi-anvil pressure apparatus using different solid buffers (Ni+NiO, Fe+Fe₃O₄, Fe+FeO and Mo+MoO₂) to stabilize the partial pressure of oxygen. The temperature ranged from 1073 to 1423 K (800 to 1200 °C) and the pressure from 1.0 to 4.0 GPa. We observe that: (1) the electrical conductivity (σ) of pyroxenite depends on frequency; (2) σ tends to increase with rising temperature (T), and Log σ and 1/T obey a linear Arrhenius relationship; (3) under control of the buffer Fe+Fe₃O₄, σ tends to decrease with rising pressure, nevertheless the activation enthalpy tends to increase. For the first time we have obtained values for the activation energy and activation bulk volume of the main charge carriers, which are (1.60±0.07) eV and (0.05±0.03) cm³/mol, respectively; (4) for a given pressure and temperature, σ tends to rise with increased oxygen fugacity, whereas the activation enthalpy and preexponential factor tend to decrease; and (5) the behaviour of the electrical conductivity at high temperature and high pressure can be reasonably interpreted by assuming that small polarons provide the dominant conduction mechanism in the pyroxenite samples.     

High pressure X-ray diffraction study on BaWO4-II

BaWO₄-II has been synthesized at 5 GPa and 610°C. Its high pressure behavior was studied by in situ synchrotron X-ray diffraction measurements at room temperature up to 17 GPa. BaWO₄-II retains its monoclinic structure. Bulk and axial moduli determined by fitting a third-order Birch–Murnaghan equation of state to lattice parameters are: K ₀=86.2±1.9 GPa, K ₀(a)=56.0±0.9 GPa, K ₀(b)=85.3±2.4 GPa, and K ₀(c)=146.1±3.2 GPa with a fixed K′=4. Analysis of axial compressible modulus shows that the a-axis is 2.61 times more compressible than the c-axis and 1.71 times more compressible than the b-axis. The beta angle decreases smoothly between room pressure and 17 GPa from 93.78° to 90.90°.     

Phase transitions in PbTe under quasi-hydrostatic pressure up to 50 GPa

PbTe has been investigated using synchrotron X-ray diffraction (XRD) in a diamond anvil cell under quasi-hydrostatic pressures up to 50 GPa. Upon compression to 6.6 GPa, the initial NaCl phase transforms to an intermediate phase, which is confirmed to be an orthorhombic structure with a space group Pnma. At 18.4 GPa, the intermediate Pnma phase undergoes a phase transition to the CsCl structure. The systemic analysis of the crystal structures between the NaCl and intermediate phases indicates that the structure of the Pnma phase could be derived from the distortion of the NaCl structure. The bulk modulus of the CsCl phase is B₀=52(2) GPa with V₀=60.8(4) ų and B′₀=4.0 (fixed), slightly larger than the NaCl phase (B₀=44(1) GPa) and the intermediate phase (B₀=49(3) GPa).     

Investigation of formation mechanism of Ti3SiC2 by high pressure and high-temperature synthesis

ABSTRACT

In this paper, synthesis of titanium silicon carbide (Ti₃SiC₂) under high pressure and high-temperature condition has been investigated by using the reactant systems Ti/Si/C, Ti/SiC/TiC, Ti/SiC/C and Ti/TiC/Si. Results reveal that Ti/TiC/Si is unsuited to the synthesis of Ti₃SiC₂ under a high pressure of 2.0?GPa, while an elemental mixture of Ti/Si/C is applicable. By the addition of Al, Ti₃SiC₂ with 95.8?wt% purity was obtained from elemental mixture with a large excess of silicon. The optimum experimental parameters were determined as Ti/Si/Al/C having the molar ratio of 3:1.5:0.5:1.9, holding at 2.0?GPa and 1300?°C for 60?min.     

Phase transition of samarium under high pressure

Abstract

The DAC X-ray power photograph method was employed for studing the phase transition of samarium up to 26.3 GPa. The experimental results show that the dhcp and fcc high pressure phase of Sm appeared at about 4.0 and 12.5 GPa and room temperature respectively. The dhcp phase was kept until 19.6 GPa. A model for Sm-type -? dhcp -? fcc phase transition is provided in this paper.