Strong adhesion and smooth conductive surface via graft polymerization of aniline on a modified glass fiber surface

The goal of this paper is to prepare surface-conductive glass fibers. The fibers were first hydroxylated, after which they were reacted with 3-bromopropyltrichlorosilane to form a bromopropylsilane monolayer, which was further reacted with aniline to substitute the bromine atoms. The surface-bound aniline molecules were used as active sites for the graft polymerization of polyaniline (PANI). The composition, structure and the morphology of the modified glass fiber surface were examined by X-ray photoelectron spectroscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. The method generated a smooth and homogenous thin layer of PANI on the surface of the glass fiber with a surface conductivity of about 6 S/cm, hence larger than the usual value ( approximately 1 S/cm) of the bulk polyaniline.     

锰（Ⅱ）—邻菲口罗啉配合物极谱吸附波及其应用

在ｐＨ９．５ＮＨ３ＮＨ４Ｃｌ缓冲溶液中，Ｍｎ（Ⅱ）与邻菲口罗啉形成的配合物在－１．３６Ｖ（ｖｓ．ＳＣＥ）处产生一灵敏的吸附波，一阶导数峰电流与Ｍｎ（Ⅱ）浓度在５×１０－８５×１０－６ｍｏｌ／Ｌ范围内呈线性关系，检出限为２×１０－８ｍｏｌ／Ｌ对极谱性质及反应机理进行了研究，用该法测定了大豆和茶叶中的微量锰，结果满意     

Accurate local spin-polarized exchange potential: Reconciliation of generalized Slater and Kohn–Sham methods

Using simple physical arguments, a local spin-polarized exchange potential, V_xσ, is constructed from the single-particle Hartree–Fock (HF ) potentials (generalized Slater method) that reduces to the usual Kohn–Sham (KS ) result in the uniform gas limit. Numerical results for 10 closed subshell atoms demonstrate that the total energy calculated employing this V_xσ is closer to the exact KS results than those of other standard exchange approximations with electron densities and highest occupied orbital eigenvalues that closely approximate the HF results.     

A novel anthracenyl tagged protecting group for "phase-switching" applications in parallel synthesis

A new "phase-switching" protecting group 1 that facilitates the parallel synthesis of carboxylic acids, esters, and carboxamides is described. Its use permits chemistries to be performed in solution, which may be conveniently monitored with conventional analytical techniques, followed by subsequent immobilization onto a solid-phase support to aid compound purification. Carboxylic acids, esters, and carboxamides are then cleaved from the solid support following activation of the "safety-catch" and treatment with the desired nucleophile.     

The Baylis-Hillman condensation of alpha,beta-conjugate cycloketones with aldehydes using diethylaluminum iodide alone as the promoter

The Baylis-Hillman condensation of three types of alpha,beta-conjugate cycloketones with aldehydes was successfully performed by using diethylaluminum iodide as the Lewis acid promoter alone without the direct use of a Lewis base. The reaction proceeded to completion at 0 degree C in CH2Cl2 within 24 h to give modest to good yields (53-72%).     

Coriatone and corianlactone, two novel sesquiterpenes from Coriaria nepalensis

Both coriatone (1). a novel highly oxygenated picrotoxane-type sesquiterpene, and corianlactone (2). with an unprecedented sesquiterpene basic skeleton, named coriane, were isolated from Coriaria nepalensis Wall. The structures of 1 and 2 were determined by analysis of their two-dimensional NMR data, and the structure of 2 was confirmed by X-ray analysis. Compounds 1 and 2 showed no remarkable inhibitory activity toward K(562) cells. They are cytotoxic with IC(50) > 50 microg/mL (cis-platinim: IC(50) = 0.49 microg/mL).     

Synthesen neuer Phosphono-Analoga von Pantethein-derivaten

Syntheses of New Phosphono Analogues of Pantetheine Derivatives The phosphono analogues 5 and 13 of pantothenate 4′-(dibenzyl phosphate) and pantetheine 4′-(dibenzyl phosphate), respectively, are prepared as intermediates for the synthesis of a coenzyme-A phosphono analogue (Schemes 1 and 2). The synthesis of phosphono analogues 20 and 21 of oxapantetheine, which are structurally similar compounds to the phosphono analogue of pantetheine, is also described (Scheme 3).     

Recovery of thick shear bands in atactic polystyrene

The DSC thermograms of the shear band material cut out by a diamond saw to include some undeformed material revealed two T_g's clearly separated by about 10°C. The first T_g was at the same temperature as the T_g of the undeformed material. The second T_g, which was at a higher temperature than the first T_g, appeared shortly after the shear strain recovery during the heating of the shear band material in the DSC. When the shear strain in the shear band was partially reversed by mechanical means before taking the DSC thermogram, the ΔT between the two T_g's decreased and when the shear strain was mechanically reversed to almost zero, the second T_g disappeared. The stored energy of shear band material was found to be similar to that of the bulk compressed material for large strains. Dimensional recovery during heating of specimens with thick and fine bands was similar, both taking place above T_g.     

Migration of 99Tc in a Weak Loess Aquifer: A Field Column Experiment

The migration of ⁹⁹Tc in a weak loess aquifer was investigated in-situ with undisturbed aquifer medium columns. The columns were obtained horizontally at a depth of 3236 m in an Underground Research Facility (URF). Quartz containing ³H (HTO) and ⁹⁹Tc (in the form of ⁹⁹TcO₄ ^-) was introduced into one end of the columns and the columns were covered tightly. Aquifer water was introduced into the columns directly from an experimental shaft in the UFR. Effluents from the columns were collected and the activity of ³H and ⁹⁹Tc were determined with a liquid scintillation analyzer. The breakthrough curves of ³H and ⁹⁹Tc indicate that ⁹⁹Tc migrates a little faster than that ³H does in the aquifer.     

Simple synthesis of aminoquinoline/ethylaniline copolymer semiconducting nanoparticles

Pure copolymer nanoparticles from 8-aminoquinoline (AQ) and 2-ethylaniline (EA) were easily synthesized by a chemically oxidative polymerization in three different aqueous media. The potential and temperature of polymerization solution were used to successfully follow the polymerization progress. The molecular and morphological structures of the resulting AQ/EA copolymer particles were systematically characterized by IR, UV/Vis, NMR, gel permeation chromatography, laser particle-size analysis, atomic force and transmission electron microscopy. The oxidation potential of the monomers as well as the polymerization yield, structure, and properties of the particles were found to significantly depend on AQ/EA ratio, polymerization temperature and medium. It is surprisingly found that AQ homopolymerization and AQ/EA (50:50) copolymerization at 5 degrees C in HCl simply afford nano-ellipsoids with the major/minor axis diameters of 24/14 nm and 80/67 nm, respectively. A simple method of synthesizing semiconducting pure nanoparticles by introducing the AQ units with positively charged quaternary ammonium groups but in the absence of adscititious stabilizer or sulfonic substituent on the monomers is established first. Both the molecular weight and bulk electroconductivity of the copolymers exhibit a maximum at AQ content of 10 mol %. The solubility and film formability of the copolymers are good in highly polar solvents and reach the optimal at the AQ content of 20 and 10 mol %, respectively.