Particle-rotor-model calculations in 125I

Recent experimental data on ¹²⁵I has revealed several interesting structural features. These include the observation of a three quasiparticle band, prolate and oblate deformed bands, signature inversion in the yrast positive-parity band and identification of the unfavoured πh _11/2 band showing very large signature splitting. In the present work, particle-rotor-model calculations have been performed for the πh _11/2 band, using an axially symmetric deformed Nilsson potential. The calculations reproduce the experimental results well and predict a moderate prolate quadrupole deformation of about 0.2 for the band.     

Effect of Mg doping on morphology,photocatalytic activity and related biological properties of Zn1−xMgxO nanoparticles

The objective of this study is to synthesize ZnO and Mg doped ZnO (Zn_1−xMg_xO) nanoparticles via the sol-gel method, and characterize their structures and to investigate their biological properties such as antibacterial activity and hemolytic potential.Nanoparticles (NPs) were synthesized by the sol-gel method using zinc acetate dihydrate (Zn(CH₃COO)₂.2H₂O) and magnesium acetate tetrahydrate (Mg(CH₃COO)₂.4H₂O) as precursors. Methanol and monoethanolamine were used as solvent and sol stabilizer, respectively. Structural and morphological characterizations of Zn_1−xMg_xO nanoparticles were studied by using XRD and SEM-EDX, respectively. Photocatalytic activities of ZnO and selected Mg-doped ZnO (Zn_1−xMg_xO) nanoparticles were investigated by degradation of methylene blue (MeB). Results indicated that Mg doping (both 10% and 30%) to the ZnO nanoparticles enhanced the photocatalytic activity and a little amount of Zn0.90 Mg0.10 O photocatalyst (1.0 mg/mL) degraded MeB with 99% efficiency after 24 h of irradiation under ambient visible light. Antibacterial activity of nanoparticles versus Escherichia coli ( E. coli ) was determined by the standard plate count method. Hemolytic activities of the NPs were studied by hemolysis tests using human erythrocytes. XRD data proved that the average particle size of nanoparticles was around 30 nm. Moreover, the XRD results indicatedthat the patterns of Mg doped ZnO nanoparticles related to ZnO hexagonal wurtzite structure had no secondary phase for x ≤ 0.2 concentration. For 0 ≤ x ≤ 0.02, NPs showed a concentration dependent antibacterial activity against E. coli . While Zn_0.90Mg_0.10 O totally inhibited the growth of E. coli , upper and lower dopant concentrations did not show antibacterial activity.     

14CO2 labeling : a reliable technique for rapid measurement of total root exudation capacity and vascular sap flow in crop plants

Root release of organic compounds and rate of the vascular sap flow are important for understanding the nutrient and the source-sink dynamics in plants, however, their determination is procedurally cumbersome and time consuming. We report here a simple method involving ¹⁴C labeling for rapid and reliable measurement of root exudates and vascular sap flow rate in a variable groundnut population developed through seed gamma irradiation using a cobalt source (⁶⁰Co). An experimental hypothesis that a higher ¹⁴C level in the vascular sap would indicate a higher root release of carbon by the roots into the rhizosphere was verified.     

Novel BODIPY-bridged cyclotriphosphazenes

Three new 2-component unsubstituted ( 4P ), diiodo- ( 5P ), and dibromo- ( 6P ) distyryl-BODIPY-bridged cyclotriphosphazene dimers were designed and synthesized. The newly synthesized BODIPY-cyclotriphosphazene systems were characterized by ¹ H, ¹³ C, and ³¹ P NMR spectroscopy. The photophysical properties of the distryl-BODIPYs (4–6) and BODIPY-cyclotriphosphazene dyads ( 4P – 6P ) were studied by UV-Vis absorption and fluorescence emission spectroscopy. In these derivatives, the bino-type cyclotriphosphazene derivative bearing unsubstituted BODIPY unit 4P exhibited high fluorescence and no singlet oxygen generation due to the lack of spin converter. The attachment of heavy atoms (iodine and bromine) enabled the production of singlet oxygen. The bino-type BODIPY-cyclotriphosphazenes ( 5P and 6P ) were also used as triplet photosensitizers in the photooxidation of 1,3-diphenylisobenzofuran to endoperoxide via generation of the singlet oxygen in dichloromethane. The singlet oxygen production of these compounds was also investigated via a direct method and produced a singlet oxygen phosphorescence peak at 1270 nm.     

Photochromic and fluorescence properties of coumarin fulgimides

Four new fulgimides possessing a fluorescent coumarin unit were synthesized from the corresponding fulgides, and their photochromic as well as fluorescence properties were investigated. The open-ring forms of coumarin fulgimides were found to exhibit fluorescence in the visible region. Upon exposure to UV light, the fulgimides were transformed into the nonfluorescent closed-ring forms, which can be reverted to the initial fluorescent open-ring forms on exposure to visible light. The efficiency of quenching of fluorescence was as high as 95% at the photostationary state of UV irradiation.     

Low loaded Pt-Co catalyst surfaces optimized by magnetron sputtering sequential deposition technique for PEM fuel cell applications: physical and electrochemical analysis on carbon paper support

A series of thin Pt-Co films with different metal ratios were deposited by using the sequential cosputtering directly on a commercial hydrophobic carbon paper substrate at room temperature and in ultra-high vacuum (UHV) conditions. Their electrocatalytic properties toward the oxygen reduction reaction were investigated in 0.5 M H₂SO₄ solution by means of cyclic voltammetry (CV) and linear sweep voltammetry (LSV) on rotating disc electrode (RDE). The results showed that Pt particles, deposited by dc-magnetron gun, surround the large Co-clusters deposited by rf-magnetron gun. In addition, the increase of Co content led to an increase in the electrochemical active surface area (EASA) from 23.75 m²/gPt to 47.54 m²/gPt for pure Pt and Pt:Co (1:3), respectively, which corresponded the improvement of the utilization of Pt by a factor of 1.91. This improvement indicated that the sequential magnetron cosputtering was one of the essential technique to deposit homogeneous metal clusters with desirable size on the gas diffusion layer by adjustment plasma parameters.     

Fabrication of polystyrene hollow microspheres as laser fusion targets by optimized density-matched emulsion technique and characterization

Inertial confinement fusion, frequently referred to as ICF, inertial fusion, or laser fusion, is a means of producing energy by imploding small hollow microspheres containing thermonuclear fusion fuel. Polymer microspheres, which are used as fuel containers, can be produced by solution-based micro-encapsulation technique better known as density-matched emulsion technique. The specifications of these microspheres are very rigorous, and various aspects of the emulsion hydrodynamics associated with their production are important in controlling the final product. This paper describes about the optimization of various parameters associated with density-matched emulsion method in order to improve the surface smoothness, wall thickness uniformity and sphericity of hollow polymer microspheres. These polymer microshells have been successfully fabricated in our lab, with 3–30 μm wall thickness and 50–1600 μm diameters. The sphericity and wall thickness uniformity are better than 99%. Elimination of vacuoles and high yield rate has been achieved by adopting the step-wise heating of W₁/O/W₂ emulsion for solvent removal.     

Concept of multipole magnetic field rotation in ECRIS

The conventional type of magnetic well is formed by superposition of two types of magnetic field, axial bumpy field and radial multipole field. It is used to contain plasma that consists of neutrals, ions and electrons. These particles are in constant motion in the well and energetic electrons create plasma by violent collisions with neutrals and ions. The confined electrons are constantly heated by ECR technique in the presence of magnetic field. In this paper it has been shown theoretically that how the electron motion is influenced in terms of heating, containment and azimuthal uniformity of plasma, by the axial rotation of the multipole magnetic field [1,2]. Afterwards, the feasibility of achieving a rotating magnetic multipole field is discussed to some extent. And it is seen that it is not beyond the capability of the scientific community in the present scenario of the advanced technology. Presently, it can be achieved for lesser field and slightly larger size of the multipole electromagnet and can be used for improvement of the ECR ion source (ECRIS).     

High spin spectroscopy of 139Pr

The high spin states in N=80 ¹³⁹Pr have been investigated by in-beam γ-spectroscopic techniques following the reaction ¹³⁰Te (¹⁴N, 5n) reaction at E=75 MeV, using a gamma detector array, consisting of seven 23% compton-suppressed high purity germanium detectors and a multiplicity ball of fourteen bismuth germanate elements. Based on γ-γ coincidence data, the level scheme of ¹³⁹Pr has been considerably extended up to 7.2 MeV excitation. Tentative spin-parity assignments are done for the newly proposed levels on the basis of the DCO ratios corresponding to strong gates and the available information from the earlier light ion experiments.