Determination of the Absolute Configuration of Perylene Quinone‐Derived Mycotoxins by Measurement and Calculation of Electronic Circular Dichroism Spectra and Specific Rotations

Altertoxins I–III, alterlosins I and II, alteichin (alterperylenol), stemphyltoxins I–IV, stemphyperylenol, stemphytriol, 7‐epi‐8‐hydroxyaltertoxin I, and 6‐epi‐stemphytriol are mycotoxins derived from perylene quinone, for which the absolute configuration was not known. Electronic circular dichroism (ECD) spectra were calculated for these compounds and compared with measured spectra of altertoxins I–III, alteichin, and stemphyltoxin III and with reported Cotton effects. Specific rotations were calculated and compared with reported specific rotations. The absolute configuration of all the toxins, except for stemphyltoxin IV, could thus be determined. The validity of the assignment was high whenever reported ECD data were available for comparison, and the validity was lower when the assignment was based only on the comparison of calculated and reported specific rotations. ECD spectra are intrinsically different for toxins with a biphenyl substructure and for toxins derived from dihydroanthracene.     

Organ Repair,Hemostasis, and In Vivo Bonding of Medical Devices by Aqueous Solutions of Nanoparticles

Sutures are traumatic to soft connective tissues, such as liver or lungs. Polymer tissue adhesives require complex in vivo control of polymerization or cross‐linking reactions and currently suffer from being toxic, weak, or inefficient within the wet conditions of the body. Herein, we demonstrate using Stöber silica or iron oxide nanoparticles that nanobridging, that is, adhesion by aqueous nanoparticle solutions, can be used in vivo in rats to achieve rapid and strong closure and healing of deep wounds in skin and liver. Nanoparticles were also used to fix polymer membranes to tissues even in the presence of blood flow, such as occurring after liver resection, yielding permanent hemostasis within a minute. Furthermore, medical devices and tissue engineering constructs were fixed to organs such as a beating heart. The simplicity, rapidity, and robustness of nanobridging bode well for clinical applications, surgery, and regenerative medicine.     

Highly Tin‐Selective Stille Coupling: Synthesis of a Polymer Containing a Stannole in the Main Chain

The incorporation of heavier Group 14 element heteroles into semiconducting polymers leads to unusual optoelectronic properties. However, polymers containing stannoles have not been accessible to date. We report a synthetic route to a well‐defined, stannole‐containing polymer, the first example of this class of π‐conjugated polymers. This route was made possible by developing difunctionalized stannole monomers and highly tin‐selective Stille coupling reactions that leave the tin in the stannole untouched. Compared to poly(3‐n‐hexylthiophene), the resulting polymer displays a remarkable bathochromic shift in its absorption.     

The Formation of Imidazolium Salt Intimate (Contact) Ion Pairs in Solution

1‐n‐Butyl‐2,3‐dimethylimidazolium (BMMI) ionic liquids (ILs) associated with different anions undergo H/D exchange preferentially at 2‐Me group of the imidazolium in deuterated solvents. This process is mainly related to the existence of ion pairs rather than the anion basicity. The H/D exchange occurs in solvents (CDCl₃ and MeCN for instance) in which intimate contact ion pairs are present and the anion possesses a labile H in its structure, such as hydrogen carbonate and prolinate. In D₂O, separated ion pairs are formed and the H/D exchange does not occur. A plausible catalytic cycle is that the IL behaves as a neutral base in the course of all H/D exchange processes. NMR experiments, density functional calculations, and molecular dynamics simulations corroborate these hypotheses.     

A Dynamic Model for Cellulosic Biomass Hydrolysis: a Comprehensive Analysis and Validation of Hydrolysis and Product Inhibition Mechanisms

The objective of this study is to perform a comprehensive enzyme kinetics analysis in view of validating and consolidating a semimechanistic kinetic model consisting of homogeneous and heterogeneous reactions for enzymatic hydrolysis of lignocellulosic biomass proposed by the U.S. National Renewable Energy Laboratory (Kadam et al., Biotechnol Prog 20(3):698–705, 2004) and its variations proposed in this work. A number of dedicated experiments were carried out under a range of initial conditions (Avicel® versus pretreated barley straw as substrate, different enzyme loadings and different product inhibitors such as glucose, cellobiose and xylose) to test the hydrolysis and product inhibition mechanisms of the model. A nonlinear least squares method was used to identify the model and estimate kinetic parameters based on the experimental data. The suitable mathematical model for industrial application was selected among the proposed models based on statistical information (weighted sum of square errors). The analysis showed that transglycosylation plays a key role at high glucose levels. It also showed that the values of parameters depend on the selected experimental data used for parameter estimation. Therefore, the parameter values are not universal and should be used with caution. The model proposed by Kadam et al. (Biotechnol Prog 20(3):698–705, 2004) failed to predict the hydrolysis phenomena at high glucose levels, but when combined with transglycosylation reaction(s), the prediction of cellulose hydrolysis behaviour over a broad range of substrate concentrations (50–150 g/L) and enzyme loadings (15.8–31.6 and 1–5.9 mg protein/g cellulose for Celluclast and Novozyme 188, respectively) was possible. This is the first study introducing transglycosylation into the semimechanistic model. As long as these type of models are used within the boundary of their validity (substrate type, enzyme source and substrate concentration), they can support process design and technology improvement efforts at pilot and full-scale studies.     

A Phosphine Functionalized β-Diketimine Ligand for the Synthesis of Manifold Metal Complexes

A bis(diphenyl)-phosphine functionalized β-diketimine (PNac-H) was synthesized as a flexible ligand for transition metal complexes. The newly designed ligand features symmetrically placed phosphine moieties around a β-diketimine unit, forming a PNNP-type pocket. Due to the hard and soft donor atoms (N vs. P) the ligand can stabilize various coordination polyhedra. A complete series ranging from coordination numbers 2 to 6 was realized. Linear, trigonal planar, square planar, tetrahedral, square pyramidal, and octahedral coordination arrangements containing the PNac-ligand around the metal center were observed by using suitable metal sources. Hereby, PNac-H or its anion PNac⁻ acts as mono-, bi- and tetradendate ligand. Such a broad flexibility is unusual for a rigid tetradentate system. The structural motifs were realized by treatment of PNac-H with a series of late transition metal precursors, for example, silver, gold, nickel, copper, platinum, and rhodium. The new complexes have been fully characterized by single crystal X-ray diffraction, NMR, IR, UV/Vis spectroscopy, mass spectrometry as well as elemental analysis. Additionally, selected complexes were investigated regarding their photophysical properties. Thus, PNac-H proved to be an ideal ligand platform for the selective coordination and stabilization of various metal ions in diverse polyhedra and oxidation states.     

Elucidation of the solidification sequence of a complex graphitic HSS alloy under a combined approach of DTA and EBSD analyses

Journal of Thermal Analysis and Calorimetry - In this work, a complex graphitic high-speed steel (Gr-HSS) obtained from a spin-casting process that allows high cooling rates during solidification...     

Cyclic antiautomorphisms of directed triple systems

A transitive triple, (a,b,c), is defined to be the set {(a,b), (b,c), (a,c)} of ordered pairs. A directed triple system of order v, DTS(v), is a pair (D,β), where D is a set of v points and β is a collection of transitive triples of pairwise distinct points of D such that any ordered pair of distinct points of D is contained in precisely one transitive triple of β. An antiautomorphism of a Directed triple system, (D,β), is a permutation of D that maps β to β⁻¹, where β ⁻¹ = {(c,b,a)|(a,b,c) E β}. In this article we give necessary and sufficient conditions for the existence of a Directed triple system of order v admitting an antiautomorphism consisting of a single cycle of length d and having v − d fixed points. Further, we give a more general result for partial Directed triple systems in which the missing ordered pairs are precisely those containing two fixed points. © 1996 John Wiley & Sons, Inc.     

Capillary zone electrophoresis with UV-scanning detection for the analysis of metal species and their organic binding partners in biological systems

A capillary zone electrophoretic method with UV-scanning detection for the separation and identification of both free ligands and metal species is presented. The electrophoretic behavior of naturally occurring binding partners such as organic acids and amino acids was studied and compared with their metal-complexes. Copper(II) complexes of citrate and amino acids showed decreased electrophoretic mobilities and altered UV spectra. The optimized method was validated on ultrafiltered cow's milk and human milk samples. In cow's milk six low molecular weight substances, including citrate, orotate, and hippurate, could be separated. Metal supplementation with Cu(II), Ni(II), or Zn(II) decreased not only the citrate peak but also the orotate signal and in the case of copper(II) supplementation a new signal for the copper(II)-citrate complex appeared. In human milk samples various amino acids such as glutamate, phenylalanine, tyrosine, and tryptophan could be identified besides citrate. The electrophoretic mobilites and peak areas of the amino acids were also influenced by the metal supplementation.