Important Requirements for the Selection of Internal Standards during the Development of Desorption/Ionization Assays for Drug Quantification in Biological Matrices—A Practical Example

Desorption/ionization mass spectrometry (DI-MS) approaches allow for the rapid quantification of drugs in biological matrices using assays that can be validated according to regulatory guidelines. However, specific adaptations must be applied to create reliable quantification methods, depending on the approach and instrumentation used. In the present article, we demonstrate the importance of the molecular weight, the fragmentation pattern, and the purity of the internal standard for the development of matrix-assisted laser desorption/ionization (MALDI)-ion mobility (IM)-tandem MS and MS/MS methods. We present preliminary results of method development for the quantification of selinexor in microdialysis fluids with a stable isotopically labeled internal standard. In addition, we discuss the selection of internal standards for MALDI-MS assays using different instrumentations.     

Networks of rigid molecules

Networks of rigid molecules do not fit into the paradigm of classical theories of rubber elasticity. Some experimental properties of rigid polyamide networks are summarised, and the basis for a theoretical understanding of such systems is discussed and elaborated in terms of the properties such as the existence of several conformational states and twist of such network elements.     

Polyurea microcapsules from isocyanatoethyl methacrylate copolymers

The synthesis of two types of isocyanate side chain containing copolymers, poly(methyl methacrylate‐co‐isocyanatoethyl methacrylate) (P(MMA‐co‐IEM)) and poly(benzyl methacrylate‐co‐isocyanatoethyl methacrylate) (P(BnMA‐co‐IEM)), which were synthesized by Cu(0)‐mediated radical polymerization, is reported. Polymerization proceeded to high conversion giving polymers of relatively narrow molar mass distributions. The incorporation of the bulky aromatic groups in the latter copolymer rendered it sufficiently stable toward hydrolysis and enabled the isolation of the product and its characterization by ¹H and ¹³C NMR, and FTIR spectroscopy and SEC. Both P(MMA‐co‐IEM) and P(BnMA‐co‐IEM) were functionalized with dibutylamine, octylamine, and (R)‐(+)‐α‐methylbenzyl‐amine, which further proved the successful incorporation of the isocyanate groups. Furthermore, P(BnMA‐co‐IEM) was used for the fabrication of liquid core microcapsules via oil‐in‐water interfacial polymerization with diethylenetriamine as crosslinker. The particles obtained were in the size range of 10–90 µm in diameter independent of the composition of copolymer. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2698–2705     

Universal scaling in transient creep

We present experimental evidence that pressure solution creep does not establish a steady-state interface microstructure as previously thought. Conversely, pressure solution controlled strain and the characteristic length scale of interface microstructures grow as the cubic root of time. Transient creep with the same scaling is known in metallurgy (Andrade creep). The apparent universal scaling of pressure solution transient creep is explained using an analogy with spinodal dewetting.     

Convergence and summability of Gabor expansions at the Nyquist density

It is well known that Gabor expansions generated by a lattice of Nyquist density are numerically unstable, in the sense that they do not constitute frame decompositions. In this paper, we clarify exactly how bad such Gabor expansions are, we make it clear precisely where the edge is between enough and too little, and we find a remedy for their shortcomings in terms of a certain summability method. This is done through an investigation of somewhat more general sequences of points in the time-frequency plane than lattices (all of Nyquist density), which in a sense yields information about the uncertainty principle on a finer scale than allowed by traditional density considerations. An important role is played by certain Hilbert scales of function spaces, most notably by what we call the Schwartz scale and the Bargmann scale, and the intrinsically interesting fact that the Bargmann transform provides a bounded invertible mapping between these two scales. This permits us to turn the problems into interpolation problems in spaces of entire functions, which we are able to treat.     

Recovery of spectral features readout with frequency-chirped laser fields

A data-processing technique is proposed for use with conventional frequency-chirped absorption spectroscopy to ensure accurate mapping of spectral features into time-domain signatures with arbitrarily fast readout chirp rates. This technique recovers the spectrum from a signal that is distorted owing to the fast chirp rate and therefore facilitates fast measurement of the spectral features over a broad spectral range with high resolution. Both numerical simulations and experimental results are presented.     

Measurements of electron-transfer rates of charge-storage molecular monolayers on Si(100). Toward hybrid molecular/semiconductor information storage devices

Redox kinetics were measured for two electroactive molecules attached to Si(100) surfaces, a ferrocene (Fc-BzOH) and a Zn(II) trimesitylporphyrin (Por-BzOH). Each molecule was derivatized with a benzyl alcohol linker for attachment to the Si surface via the formation of a Si-O bond. A complete protocol was developed for the preparation of stable Si(100) surfaces derivatized with the electroactive molecules. The redox-kinetic measurements were performed on the resulting Fc-BzOH and Por-BzOH monolayers to probe (1) the rate of electron transfer (k0) for oxidation in the presence of applied potentials and (2) the rate of charge dissipation after the applied potential is disconnected (in the form of a charge-retention half-life t1/2). The k0 values for the two types of monolayers were found to be similar to one another as were the t1/2 values. Perhaps more importantly, the electron-transfer rates for both the Fc-BzOH and the Por-BzOH monolayers differ from the charge-dissipation rates by approximately 6 orders of magnitude and are strongly dependent on the surface concentration of the electroactive species. For the Por-BzOH monolayers on Si(100), the k0 and t1/2 values and their trends as a function of surface coverage were determined to be similar to those previously measured for the analogous thiol-derivatized molecule assembled on Au(111). In contrast, the Fc-BzOH monolayers on Si(100) were found to exhibit much slower electron-transfer and charge-dissipation rates than those in the corresponding thiol-Au(111) case. Two alternative hypotheses are advanced to explain both the diminution in rates with increased surface coverage and the contrasting behavior with the analogous thiols on Au, one based on space-charge effects at the monolayer-solution interface, and a second relying on changes in distance of the redox centers from the surface as modulated by the orientation of the linking chains. Collectively, the ability to prepare and study stable, electroactive molecular media on Si(100) is likely to be key in the development of hybrid molecular/semiconductor devices.     

Structural characterization of crystalline ternary inclusion compounds at the air-water interface

Crystalline ternary inclusion monolayers consisting of a two-dimensional hydrogen-bonded host network of guanidinium (G) ions and organosulfonate (S) amphiphiles, and biphenylalkane guests, can be generated at the air-water interface through synergistic structural enforcement by hydrogen bonding and host-guest packing. Surface pressure-area isotherms of the 4'-hexadecylbiphenyl-4-sulfonate (C16BPS) amphiphile in the presence of G, with or without guest, are characterized by lift-off molecular areas expected for the GS sheet based on single-crystal X-ray structures of homologous bulk crystals. Intercalation of biphenylalkane guests (4-C(n)()H(2)(n)()(+1)-C(6)H(4)-C(6)H(5), n = 1, 4, 6, 10, 16; denoted CnBP) between organosulfonate hydrophobes, which define pocketlike cavities in the GS monolayer host, afford ternary inclusion monolayers with a 1:1 host-guest stoichiometry. These inclusion monolayers are less compressible than the guest-free host, consistent with dense packing of the biphenylalkane moieties of the host and the biphenylalkane guests. The inclusion monolayers are distinguished from the amorphous guest-free host and from selected guanidinium-free mixed monolayers by structural characterization with grazing-angle incidence X-ray diffraction (GIXD). The GIXD data for the ternary (G)C16BPS:C16BP and (G)C16BPS:C6BP inclusion monolayers obtained upon compression are consistent with a rectangular unit cell. The dimensions of these unit cells and refinement of the GIXD data suggest a "rotated shifted ribbon" GS hydrogen-bonding motif similar to that observed in some bulk GS crystals, including (G)(ethylbiphenylsulfonate). GIXD reveals that (G)C16BPS:C16BP and (G)C16BPS:C6BP are more crystalline than the corresponding guanidinium-free mixed monolayers. The (G)C16BPS:C6BP inclusion monolayer is stable upon compression, even though the alkyl-alkyl host-guest interactions are reduced due to the shorter hexyl substituents of the guest, demonstrating an important reinforcing role for the hydrogen-bonded GS sheet. The structure of a C16BPS:tetracosane (C24) mixed monolayer is independent of G; the unit cell symmetry and dimensions suggest a structure governed by alkyl-alkane interactions that prohibit formation of a GS network. These results illustrate that the existence of ternary inclusion monolayers with an intact GS network requires guest molecules that are structurally homologous with the hydrophobes of the host, in this case biphenylalkanes. The observation of these inclusion compounds suggests an approach for introducing functional nonamphiphilic molecules to an air-water interface through inclusion in a well-defined host.