Simulation of 3D inclined/rotated UV lithography and its application to microneedles

A 3D model is set up to simulate the exposure process of inclined/rotated UV lithography for negative SU-8 resists. The formation of inclined resist pillars and microstructures with truncated cone shapes is simulated based on a 3D exposure model in combination with a post exposure bake model for chemically amplified resists and the Mack development model. As one of the interesting applications employing this promising lithography technique for MEMS fabrication, a solid microneedle for drug delivery is simulated.     

Aggressive dereplication using UHPLC–DAD–QTOF: screening extracts for up to 3000 fungal secondary metabolites

In natural-product drug discovery, finding new compounds is the main task, and thus fast dereplication of known compounds is essential. This is usually performed by manual liquid chromatography-ultraviolet (LC-UV) or visible light-mass spectroscopy (Vis-MS) interpretation of detected peaks, often assisted by automated identification of previously identified compounds. We used a 15 min high-performance liquid chromatography–diode array detection (UHPLC–DAD)–high-resolution MS method (electrospray ionization (ESI)⁺ or ESI^?), followed by 10–60 s of automated data analysis for up to 3000 relevant elemental compositions. By overlaying automatically generated extracted-ion chromatograms from detected compounds on the base peak chromatogram, all major potentially novel peaks could be visualized. Peaks corresponding to compounds available as reference standards, previously identified compounds, and major contaminants from solvents, media, filters etc. were labeled to differentiate these from compounds only identified by elemental composition. This enabled fast manual evaluation of both known peaks and potential novel-compound peaks, by manual verification of: the adduct pattern, UV–Vis, retention time compared with log D, co-identified biosynthetic related compounds, and elution order. System performance, including adduct patterns, in-source fragmentation, and ion-cooler bias, was investigated on reference standards, and the overall method was used on extracts of Aspergillus carbonarius and Penicillium melanoconidium, revealing new nitrogen-containing biomarkers for both species.     

Dynamic Relative Permeability and Simulation of WAG Injection Processes

In this work, we investigate the impact of mobility changes due to flow reversals from co-current to counter-current flow on the displacement performance of water alternating gas (WAG) injection processes. In WAG processes, the injected gas will migrate toward the top of the formation while the injected water will migrate toward the bottom of the formation. The segregation of gas, oil and water phases will result in counter-current flow occurring in the vertical direction in some portions of the reservoir during the displacement process. Previous experimental and theoretical studies of counter-current flow have shown that the relative mobility of each of the phases in a porous medium is considerably less when counter-current flow prevails as compared to co-current flow settings. A reduction of the relative permeability in the vertical direction results in a dynamic anisotropy in phase mobilities. This effect has, to the best of our knowledge, not previously been considered in the modeling and simulation of WAG processes. A new flow model that accounts for flow reversals in the vertical direction has been implemented and tested in a three-phase compositional reservoir simulator. In order to investigate the impact of flow reversals, results from the new flow model are compared to cases where counter-current flow effects on the phase mobilities are ignored. A range of displacement settings, covering relevant slug sizes, have been investigated to gauge the impact of mobility reductions due to flow reversals. Significant differences, in terms of saturation distribution, producing GOR and oil recovery, are observed between the conventional flow model (ignoring mobility reductions due to counter-current flow) and the proposed new model that accounts for reductions in phase mobility during counter-current flow. Accordingly, we recommend that an explicit representation of flow transitions between co-current and counter-current flow (and the related impact on phase mobilities) should be considered to ensure accurate and optimal design of WAG injection processes.     

Detection and characterization of silver nanoparticles in chicken meat by asymmetric flow field flow fractionation with detection by conventional or single particle ICP-MS

A method of analysis of silver nanoparticles (AgNPs) in chicken meat was developed. The homogenized chicken meat sample, which was spiked with AgNPs, was subjected to enzymolysis by Proteinase K for 40 min at 37 °C. Transmission electron microscopy and inductively coupled plasma mass spectrometry (ICP-MS) in single particle mode were used to characterize the number-based size distribution of AgNPs in the meat digestate. Because similar size distributions were found in the meat digestate and in the aqueous suspension of AgNPs used for spiking the meat, it was shown that no detectable dissolution of the AgNPs took place during the sample preparation stage. The digestate was injected into the asymmetric flow field flow fractionation (AF⁴) -ICP-MS system, which enabled fractionation of nanoparticles from the remaining meat matrix, and resulted in one large peak in the fractograms as well as two smaller peaks eluting close to the void volume. The recovery of silver contained in the large AgNP peak was around 80 %. Size determination of AgNPs in the meat matrix, based on external size calibration of the AF⁴ channel, was hampered by non-ideal (early elution) behavior of the AgNPs. Single particle ICP-MS was applied for determination of the number-based particle size distribution of AgNPs in collected fractions. The presented work describes for the first time the coupling of AF⁴ and ICP-MS for AgNP separation in a food matrix.     

Quantification of 31 illicit and medicinal drugs and metabolites in whole blood by fully automated solid-phase extraction and ultra-performance liquid chromatography–tandem mass spectrometry

An efficient method for analyzing illegal and medicinal drugs in whole blood using fully automated sample preparation and short ultra-high-performance liquid chromatography–tandem mass spectrometry (MS/MS) run time is presented. A selection of 31 drugs, including amphetamines, cocaine, opioids, and benzodiazepines, was used. In order to increase the efficiency of routine analysis, a robotic system based on automated liquid handling and capable of handling all unit operation for sample preparation was built on a Freedom Evo 200 platform with several add-ons from Tecan and third-party vendors. Solid-phase extraction was performed using Strata X-C plates. Extraction time for 96 samples was less than 3 h. Chromatography was performed using an ACQUITY UPLC system (Waters Corporation, Milford, USA). Analytes were separated on a 100 mm?×?2.1 mm, 1.7 μm Acquity UPLC CSH C₁₈ column using a 6.5 min 0.1 % ammonia (25 %) in water/0.1 % ammonia (25 %) in methanol gradient and quantified by MS/MS (Waters Quattro Premier XE) in multiple-reaction monitoring mode. Full validation, including linearity, precision and trueness, matrix effect, ion suppression/enhancement of co-eluting analytes, recovery, and specificity, was performed. The method was employed successfully in the laboratory and used for routine analysis of forensic material. In combination with tetrahydrocannabinol analysis, the method covered 96 % of cases involving driving under the influence of drugs. The manual labor involved in preparing blood samples, solvents, etc., was reduced to a half an hour per batch. The automated sample preparation setup also minimized human exposure to hazardous materials, provided highly improved ergonomics, and eliminated manual pipetting.

Synthesis and Spectroscopic Characterization of Fluorophore‐Labeled Oligospiroketal Rods

Fluorescence probes consisting of well‐established fluorophores in combination with rigid molecular rods based on spirane‐type structures were investigated with respect to their fluorescence properties under different solvent conditions. The attachment of the dyes was accomplished by 1,3‐dipolar cycloaddition between alkynes and azides (‘click’ reaction) and is a prime example for a novel class of sensor constructs. Especially, the attachment of two (different) fluorophores on opposite sides of the molecular rods paves the way to new sensor systems with less bulky (compared to the conventional DNA‐ or protein‐based concepts), nevertheless rigid spacer constructs, e.g., for FRET‐based sensing applications. A detailed photophysical characterization was performed in MeOH (and in basic H₂O/MeOH mixtures) for i) rod constructs containing carboxyfluorescein, ii) rod constructs containing carboxyrhodamine, iii) rod constructs containing both carboxyfluorescein and carboxyrhodamine, and iv) rod constructs containing both pyrene and perylene parts. For each dye (pair), two rod lengths with different numbers of spirane units were synthesized and investigated. The rod constructs were characterized in ensemble as well as single‐molecule fluorescence experiments with respect to i) specific rod? dye and ii) dye? dye interactions. In addition to MeOH and MeOH/NaOH, the rod constructs were also investigated in micellar systems, which were chosen as a simplified model for membranes.     

Facile synthesis of α-hydroxy carboxylic acids from the corresponding α-amino acids

An effective and improved procedure is developed for the synthesis of α-hydroxy carboxylic acids by treatment of the corresponding protonated α-amino acid with tert-butyl nitrite in 1,4-dioxane–water. The amino moiety must be protonated and located α to a carboxylic acid function in order to undergo initial diazotization and successive hydroxylation, since neither β-amino acids nor acid derivatives such as esters and amides undergo hydroxylations. The method is successfully applied for the synthesis of 18 proteinogenic amino acids.