Silver-catalyzed asymmetric synthesis of 2,3-dihydrobenzofurans: a new chiral synthesis of pterocarpans

2,3-Dihydrobenzofurans can be diastereoselectively prepared by condensation of aromatic aldehydes with 2,3-dihydrobenzoxasilepines under the catalysis of Ag(I) complexes, and in the presence of a source of fluoride ion. The application of this strategy by using chiral catalysts leads to a new enantioselective total synthesis of natural cis-pterocarpans and their trans isomers. Through this method, the first enantioselective total synthesis of the antifungal agent (-)-pterocarpin was achieved. In addition, a new entry into the heteroaromatic system of 2,5-dihydrobenzoxepine is also presented.     

Mixed quantum-classical dynamics in the adiabatic representation to simulate molecules driven by strong laser pulses

The dynamics of molecules under strong laser pulses is characterized by large Stark effects that modify and reshape the electronic potentials, known as laser-induced potentials (LIPs). If the time scale of the interaction is slow enough that the nuclear positions can adapt to these externally driven changes, the dynamics proceeds by adiabatic following, where the nuclei gain very little kinetic energy during the process. In this regime we show that the molecular dynamics can be simulated quite accurately by a semiclassical surface-hopping scheme formulated in the adiabatic representation. The nuclear motion is then influenced by the gradients of the laser-modified potentials, and nonadiabatic couplings are seen as transitions between the LIPs. As an example, we simulate the process of adiabatic passage by light induced potentials in Na(2) using the surface-hopping technique both in the diabatic representation based on molecular potentials and in the adiabatic representation based on LIPs, showing how the choice of the representation is crucial in reproducing the results obtained by exact quantum dynamical calculations.     

Understanding phenol adsorption mechanisms on activated carbons

The interactions between phenol molecules and activated carbons were investigated in order to understand the adsorption mechanism of this aromatic compound. A series of activated carbons with varied chemical composition but similar porous features were synthesized and submitted to phenol exposure from aqueous phase, followed by thermogravimetric analysis and identification of the desorbed species by temperature programmed desorption coupled with mass spectrometry. Based on these experiments, both physi- and chemisorption sites for phenol were identified on the activated carbons. Our results demonstrate that physisorption of phenol depends strictly on the porosity of the activated carbons, whereas chemisorption depends on the availability of the basal planes in the activated carbons. Thus, oxidation of the carbon can suppress the fraction of chemisorbed phenol since the surface functionalities incorporate to the edges of the basal planes; notwithstanding, hydrophilic carbons may present a small but not negligible contribution of chemisorbed phenol depending on the extent of the functionalization. Moreover, these adsorption sites (chemi-) are recovered by simply removal of the surface functionalities after thermal annealing.     

Non-chromatographic determination of ultratraces of V(V) and V(IV) based on a double column solid phase extraction flow injection system coupled to electrothermal atomic absorption spectrometry

In this work, a non-chromatographic procedure for the on-line determination of ultratraces of V(V) and V(IV) is presented. The method involves a solid phase extraction-flow injection system coupled to electrothermal atomic absorption spectrometry (SPE-FI-ETAAS). The system holds two microcolumns (MC) set in parallel and filled with lab-made mesoporous silica functionalized with 3-aminopropyltriethoxy silane (APS) and mesoporous silica MCM-41, respectively. The pre-concentration of V(V) is performed by sorption onto the first MC (C1) filled with APS at pH 3, whilst that of V(IV) is performed by sorption onto the second column (C2) filled with mesoporous silica MCM-41 at pH 5. Aqueous samples containing both analytes are loaded and, after pre-concentration (pre-concentration factor PCF = 10, sorption flow rate = 1 mL min⁻¹, sorption time = 10 min), they are eluted in separate vessels with hydroxylammonium chloride (HC) 0.1 mol L⁻¹ in HCl 0.5 mol L⁻¹ (elution volume = 1 mL, elution flow rate = 0.5 mL min⁻¹). Afterwards, both analytes are determined through ETAAS with graphite furnace. Under optimized conditions, the main analytical figures of merit for V(V) and V(IV) are, respectively: detection limits (3 s): 0.5 and 0.6 μg L⁻¹, linear range: 2-100 μg L⁻¹ (both analytes), sensitivity: 0.015 and 0.013 μg⁻¹ L and sample throughput: 6 h⁻¹ (both analytes). Recoveries of both species were assayed in different water samples. Validation was performed through certified reference materials for ultratraces of total vanadium in river water.     

Effect of the Ethanol/BTC Ratio on the Methane Uptake of Mechanochemically Synthesized MOF-199

We report on a detailed textural analysis of mechanochemically synthesized MOF-199 including N₂ adsorption-desorption and CO₂ adsorption isotherms data at 77 K and 273 K (up to atmospheric pressure), respectively, and CH₄ adsorption data at 298 K (up to 35 bar). We used the isotherm adsorption data to determine the micropore volume of the MOF-199 structures, to establish their methane uptake capacity and to understand how these properties depended on the Ethanol/BTC ratio used during the synthesis. The maximum methane uptake capacity for our specimens was recorded at 130 v/v at 35 bars. These results open an avenue for a better understanding of alternative manufacturing processes of MOF structures for gas storage applications.     

Development of a method for quantitative determination of the cytotoxic agent piplartine (piperlongumine) in multiple skin layers

This study reports the development of a simple and reproducible method, with high rates of recovery, to extract the cytotoxic agent piplartine from skin layers, and a sensitive and rapid UV‐HPLC method for its quantification. Considering the potential of piplartine for topical treatment of skin cancer, this method may find application for formulation development and pharmacokinetics studies to assess cutaneous bioavailability. Porcine skin was employed as a model for human tissue. Piplartine was extracted from the stratum corneum (SC) and remaining viable skin layers (VS) using methanol, vortex homogenization and bath sonication, and subsequently assayed by HPLC using a C₁₈ column, and 1:1 (v/v) acetonitrile–water (adjusted to pH 4.0 with acetic acid 0.1%) as mobile phase. The quantification limit of piplartine was 0.2 μg/mL (0.6 μm ), and the assay was linear up to 5 μg/mL (15.8 μm ), with within‐day and between‐days assay coefficients of variation and relative errors <15%. Piplartine recovery from SC and VS varied from 86 to 96%. The method was suitable to assay samples from skin penetration studies, enabling detection of differences in cutaneous delivery in different skin compartments resulting from treatment with various formulations and time periods.     

Synthesis of azanucleosides through regioselective ring-opening of epoxides catalyzed by sulphated zirconia under microwave and solvent-free conditions

New azanucleosides were obtained using sulphated zirconia (ZS) as catalyst in the nucleophilic oxirane ring opening reaction of 1-allyl-3-(oxiran-2-ylmethyl) pyrimidine-2,4(1H,3H)-dione and 1-allyl-5-methyl-3-(oxiran-2-ylmethyl)-pyrimidine-2,4(1H,3H)-dione, with (S)-prolinol. The new templates were obtained with good yields following a route which exploits the reactivity of epoxides in the presence of sulphated zirconia as catalyst. The key step was carried out using microwave and solvent-free conditions and proceeds with high selectivity.     

Heronapyrroles A-C: farnesylated 2-nitropyrroles from an Australian marine-derived Streptomyces sp

Chemical analysis of a marine-derived Streptomyces sp. (CMB-M0423) isolated from beach sand off Heron Island, Australia, yielded three new members of the rare pyrroloterpene biosynthetic structure class. Identified by detailed spectroscopic analysis as the first reported examples of naturally occurring 2-nitropyrroles, heronapyrroles A-C (1-3) displayed promising biological activity-with low to submicromolar IC(50) activity against Gram-positive bacteria but no cytotoxicity toward mammalian cell lines.     

Desirability functions as response in a d‐optimal design for evaluating the extraction and purification steps of six tranquillizers and an anti‐adrenergic by liquid chromatography‐tandem mass spectrometry

Internal standards can be added at different stages of an analytical procedure. When they are added at the beginning of a multiresidue method and their behavior is not exactly the same as that of the analytes, the intended correction for small variations within the analytical process could not be achieved. Because of this, in the present work, the use of d ‐optimal designs together with desirability functions is proposed to state the experimental response under study. The overall desirability function used relates two analytical criteria: to assess a similar chemical behavior of each analyte in relation to its internal standard and to avoid a significant reduction of the absolute peak area of the internal standards. This strategy has been applied to the analysis of the effect of four factors related to the extraction and purification steps of six tranquillizers and a β‐blocker from pig muscle analyzed by liquid chromatography–tandem mass spectrometry. The effect of those factors has been evaluated by means of an ad hoc d ‐optimal design consisting of only 11 experiments. The resulting levels of the four factors that enable to achieve the greatest overall desirability have also been compared with those obtained when either the standardized or absolute peak area has been considered as response. Differences in both the significant factors and their optimum levels have been observed. It is noticeable that the experimental effort necessary to study the effect of the factors has been reduced by more than 50% thanks to the d ‐optimal design. Copyright © 2015 John Wiley & Sons, Ltd.