Dynamic melt flow of nanocomposites based on poly-ɛ-caprolactam

 The dynamic flow behavior of polyamide-6 (PA-6) and a nanocomposite (PNC) based on it was studied. The latter resin contained 2 wt% of organoclay. The two materials were blended in proportions of 0, 25, 50, 75, and 100 wt% PNC. The dynamic shear rheological properties of well-dried specimens were measured under N₂ at T=240 °C, frequency ω=0.1–100 rad/s, and strains γ=10 and 40%. At constant T, γ, and ω the time sweeps resulted in significant increases of the shear moduli. The γ and ω scans showed a complex rheological behavior of all clay-containing specimens. At γ=10% the linear viscoelasticity was observed for all compositions only at ω>1 rad/s, while at γ=40% only for 0 and 25 wt% of PNC. However, the effect was moderate, namely decreasing G′ and G′′ (at ω=6.28 rad/s; γ=50%) by 15 and 7.5%, respectively. For compositions containing >25 wt% PNC two types of non-linearity were detected. At ω≤ω_c=1.4 ± 0.2 rad/s yield stress provided evidence of a 3-D structure. At ω > ω_c, G′ and G′′ were sensitive to shear history – the effect was reversible. From the frequency scans at ω > ω_c the zero-shear relative viscosity vs concentration plot was constructed. The initial slope gave the intrinsic viscosity from which the aspect ratio of organoclay particles, p=287 ± 9 was calculated, in agreement with the value calculated from the reduced permeability data, p=286. Received: 24 May 2001 Accepted: 27 August 2001     

Modeling red coral (Corallium rubrum) and African snail (Helixia aspersa) shell pigments: Raman spectroscopy versus DFT studies

Pigments from red coral (Corallium rubrum) and African snail (Helixia aspersa) shell were studied non‐invasively using Raman spectroscopy with 1064‐nm laser beam. The two observed bands because of organic pigments confined in biomineralized CaCO₃ matrix at about 1500 and 1100 cm⁻¹ were assigned to ν(CC) and ν(C―C), respectively. Both signals originate from polyene(s) of largely unknown structure, containing several conjugated CC bonds. The small peak at 1016 cm⁻¹ in the Raman spectrum of coral pigment was assigned to in‐plane ―CH₃ rocking or structural deformation of polyene chain because of spatial confinement in the mineral matrix. The organic pigments in red coral and snail shell were present in inorganic matrix containing aragonite (shell) and calcite (coral). In addition, using Raman spectroscopy, it was observed that aragonite was replaced by calcite as result of healing damaged parts of snail shell. This is an important finding which indicates a great potential of nondestructive Raman spectroscopy instead of X‐ray technique, as a diagnostic tool in environmental studies. To support analysis of the observed Raman spectra detailed calculations using density functional theory (DFT with B3LYP and BLYP density functionals) on structure and vibrations of model all‐trans polyenes were undertaken. DFT calculated CC and C―C stretching frequencies for all‐trans polyenes containing from 2 to 14 CC units were compared with the observed ν(CC) and ν(C―C) band positions of the studied coral and shell. Individual correction factors were used to better match theoretical wavenumbers with observed band positions in red coral and African snail. It was concluded that all‐trans polyene pigments of red coral and dark parts of African snail shell contain 11–12 and 14 CC double bond units, respectively. However, Raman spectroscopy cannot produce any clear information on the presence and nature of the end‐chain substituents in the studied pigments. Copyright © 2016 John Wiley & Sons, Ltd.     

SDEs with constraints driven by semimartingales and processes with bounded p-variation

We study the existence, uniqueness and stability of solutions of general stochastic differential equations with constraints driven by semimartingales and processes with bounded $p$-variation. Applications to SDEs with constraints driven by fractional Brownian motion and standard Brownian motion are given.     

Unequal siblings: Adverse characteristics of naphtalene‐based hoveyda‐type second generation initiators in ring opening metathesis polymerization

A family of four different Hoveyda‐type initiators bearing a π‐extended carbene ligand was characterized regarding the activity in ring opening metathesis polymerization. One of the initiators shows high activity at ambient temperature, similar to the second generation Hoveyda–Grubbs catalyst and is even suited for the controlled polymerization of certain norbornene derivatives. The other family members exhibit a pronounced latency at room temperature, and polymerization can be triggered by heat. The scope of these initiators in the thermally triggered polymerizations of norbornene derivatives in general and dicyclopentadiene in particular was disclosed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Crystal structure and morphology evolution in the LaXO3, X = Al, Ga, In nano-oxide series. Consequences for the synthesis of luminescent phosphors

The LaXO(3):Tb(3+) (X = Al(3+), Ga(3+), In(3+)) perovskite nanoparticles were obtained using the nonhydrolytic treatment (Bradley reaction) of the molecular precursors of the La(O(i)Pr)(3), Al(O(i)Pr)(3), Ga(O(i)Pr)(3), In(5)O(O(i)Pr)(13), and Tb(acac)(3), respectively. It was shown that crystal structure and morphology evolution in the LaXO(3), X = Al, Ga, In nano-oxide series depended on the size and chemical properties of the X-metal atom. Formation of the LaInO(3):Tb(3+) nanoparticles is distinctly less thermodynamically demanding on contrary to the LaAlO(3):Tb(3+) and LaGaO(3):Tb(3+) since it provided crystalline product directly in the solution synthesis at 202 °C, which is the lowest reported synthesis temperature for this compound up-to-date. This behavior was ascribed to the effects directly connected with the dopant substitution (exchange of bigger La(3+) cation with smaller Tb(3+)) as well as reduction of the particle size. The size effects are mostly reflected in the expansion of the cell volume, changes of the cell parameters as well as shifting and broadening of the Raman bands. Indirectly, size reduction has also an effect on the luminescence properties through the higher probability of presence of surface and net defects as well as heterogeneous distribution of the Tb(3+) ions caused by high surface-to-volume ratio. The prepared nanophosphors show basically green emission with exception of white-green in case of the LaInO(3):Tb(3+). Strong emission quenching was found in the latter case being most likely a consequence of the nonradiative energy transfer between Tb(3+) and In(3+) as well as the presence of defects. In comparison to the Pechini's method, the LaXO(3) nanoparticles required significantly lower annealing temperature (700 °C) necessary for complete crystallization. Generally the resulting particles are distinctly smaller (5 to 25 nm) and less agglomerated (50-100 nm) depending on the reaction conditions as well as thermal treatment. For the first time, it was shown that the LaGaO(3):Tb(3+) nanopowder has crystallized in the high-temperature rhombohedral R3c phase.     

Multiple boron-boron bonds in neutral molecules: an insight from the extended transition state method and the natural orbitals for chemical valence scheme

We have analyzed the character of B═B and B≡B bonds in the neutral molecules of general form: LHB═BHL (2-L) and LB≡BL (3-L), for various ancillary ligands L attached to the boron center, based on a recently developed method that combines the extended transition state scheme with the theory of natural orbitals for chemical valence (ETS-NOCV). In the case of molecules with the B═B bond, 2-L, we have included L = PMe(3), PF(3), PCl(3), PH(3), C(3)H(4)N(2)═C(NHCH)(2), whereas for molecules containing the B≡B connection, 3-L, the following ligands were considered L = CO, PMe(3), PCl(3), (Me(2)NCH(2)CH(2)O)(2)Ge. The results led us to conclude that use of phosphorus ligands leads to strengthening of the B═B bond by 6.4 kcal/mol (for 2-PMe(3)), by 4.4 (for 2-PF(3)) and by 9.2 (for 2-PH(3)), when compared to a molecule developed on the experimental basis, 2-C(3)H(4)N(2) (ΔE(total) = -118.3 kcal/mol). The ETS scheme has shown that all contributions, that is, (i) orbital interaction ΔE(orb), (ii) Pauli repulsion ΔE(Pauli), and (iii) electrostatic stabilization ΔE(elstat), are important in determining the trend in the B═B bond energies, ΔE(total). ETS-NOCV results revealed that both σ(B═B) and π(B═B) contributions are responsible for the changes in ΔE(orb) values. All considered molecules of the type LB≡BL, 3-L, exhibit a stronger B≡B bond when compared to a double B═B connection in 2-L (|ΔE(total)| is lower by 11.8-42.5 kcal/mol, depending on the molecule). The main reason is a lower Pauli repulsion contribution noted for 3-CO, 3-PMe(3), and 3-PCl(3) molecules. In addition, in the case of 3-PMe(3) and 3-PCl(3), the orbital interaction term is more stabilizing; however, the effect is less pronounced compared to the drop in the Pauli repulsion term. In all of the systems with double and triple boron-boron bonds, the electronic factor (ΔE(orb)) dominates over the electrostatic contribution (ΔE(elstat)). Finally, the strongest B≡B connection was found for 3-Ge [L = (Me(2)NCH(2)CH(2)O)(2)Ge], predominantly as a result of the strongest σ- and π-contributions, despite the highest destabilization originating from the sizable bulkiness of the germanium-containing ligand. The data on energetic stability of multiple boron-boron bonds (relatively high values of bond dissociation energies |ΔE(total)|), suggest that it should be possible to isolate experimentally the novel proposed systems with double B═B bonds, 2-PMe(3), 2-PF(3), 2-PCl(3), and 2-PH(3), and those with triple B≡B connections, 3-PMe(3), 3-Ge, and 3-PCl(3).     

Total synthesis of a CD-ring: side-chain building block for preparing 17-epi-calcitriol derivatives from the Hajos-Parrish dione

An efficient synthesis of the key building block for 17-epi-calctriol from the Hajos-Parrish dione involving a sequence of diastereoselective transformation of the azulene core and the side-chain construction is presented.     

Ring-expanded bicyclic β-lactams: a structure-chiroptical properties relationship investigation by experiment and calculations

In the present work, the validity of the helicity rule relating the absolute configuration of the bridgehead carbon atom in bicyclic β-lactams to the sign of the 220 nm band observed in their electronic circular dichroism (ECD) spectra is examined for ring-expanded cephalosporin analogues. To this end, a series of model compounds with a seven-membered ring condensed with the β-lactam unit was synthesized. A key step of their synthesis was either the ring-closing metathesis (RCM) or the free radical cyclization leading to the seven-membered ring with an S, O, or C atom at the 6 position in the bicyclic skeleton. To investigate the scope and limitations of the simple, empirically established helicity rule, a combination of ECD spectroscopy, variable-temperature ECD measurements, X-ray analysis, and time-dependent density functional theory (TD-DFT) calculations was used. A comparison of the experimental ECD spectra with the spectra simulated by TD-DFT calculations gives a reasonable interpretation of the Cotton effects observed in the 240-215 nm spectral range. The results suggest that the helicity rule does not apply to the investigated compounds because of the planarity of their amide chromophore. Thus, these compounds do not constitute an exception to the rule that was established for bi- and polycyclic β-lactams with the nonplanar amide chromophore only.